Unconfigured Ad Widget

Collapse

meplat trimmer and pointer

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • xEdward
    Member
    • Dec 2012
    • 323

    meplat trimmer and pointer

    Hello all,


    I like the idea of a uniform meplat, for consistancy. How do you guys feel about these and the bullet pointers for long range shooting 300+
  • #2
    bsumoba
    Veteran Member
    • Sep 2012
    • 4217

    its perfect if you're looking for that extra advantage. it gives you a higher BC, so you will have an edge on wind drift and elevation drop.

    i don't notice any huge difference until after 500 yards. at 1K for example, my POI was about 10 inches (1 MOA) higher than a non-pointed bullet. i suspect wind drift will be a little less as well.
    Visit- www.barrelcool.com
    The Original Chamber Flag and Barrel Cooler in 1
    Instagram: barrelcool_

    Comment

    • #3
      highpower790
      Veteran Member
      • Jun 2013
      • 3481

      Originally posted by bsumoba
      its perfect if you're looking for that extra advantage. it gives you a higher BC, so you will have an edge on wind drift and elevation drop.

      i don't notice any huge difference until after 500 yards. at 1K for example, my POI was about 10 inches (1 MOA) higher than a non-pointed bullet. i suspect wind drift will be a little less as well.
      bsumoba...Do you prefer a traditional hpbt or a polymer tipped bullet.For your needs ,what shoots best?
      Keep it simple!

      Comment

      • #4
        xEdward
        Member
        • Dec 2012
        • 323

        High power I think that's something your rifle will decide

        Comment

        • #5
          highpower790
          Veteran Member
          • Jun 2013
          • 3481

          Originally posted by xEdward
          High power I think that's something your rifle will decide
          Yes ,and im wanting to know somebodys opinion on what works for them!
          Keep it simple!

          Comment

          • #6
            Ahhnother8
            Senior Member
            • Feb 2007
            • 1454

            Originally posted by xEdward
            Hello all,


            I like the idea of a uniform meplat, for consistancy. How do you guys feel about these and the bullet pointers for long range shooting 300+
            Yes, bullet pointers can work for long range (800+) yards. Short of that, I doubt the benefit would be worth the effort. The process of pointing, then meplat trimming, then pointing again is not about increasing the BC, it is about making the BC consistent from bullet to bullet. That results in smaller group sizes at long range.

            Berger and Sierra now point many of their competition bullets, so trying to point them again will actually ruin them.

            Comment

            • #7
              bsumoba
              Veteran Member
              • Sep 2012
              • 4217

              For what I do, which is F-open and tactical bolt action rifle shooting, I shoot the traditional HPBT, high BC bullet like the berger hybrids (my preferred bullet in 140gr 6.5mm and 180gr 7mm) or SMKs (preferred bullet in my 308 gas gun). I do use the polymer tipped A-Max's (140gr 6.5mm A-Max) for tactical matches that are less than 600 yards sometimes, but don't see too many people shooting them in highpower/prone or F-Open or F T/R. They are using SMKs, Scenar's or berger hybrids or VLDs.

              Honestly, I am using the A-Max's when taking friends out shooting with my rifles because the bullet itself is a little cheaper, but still performs very well out to just beyond 1K. Performance is not as good as the berger hybrid still, even if I don't point them (evident by the higher BC in the hybrid).

              Polymer tipped bullets have their place. I see them as a good varmint round or maybe a hunting round. They are good target bullets as well, but when you have higher BC bullets out there, the shooters tend to gravitate towards that.
              Visit- www.barrelcool.com
              The Original Chamber Flag and Barrel Cooler in 1
              Instagram: barrelcool_

              Comment

              • #8
                xEdward
                Member
                • Dec 2012
                • 323

                Originally posted by Ahhnother8
                Yes, bullet pointers can work for long range (800+) yards. Short of that, I doubt the benefit would be worth the effort. The process of pointing, then meplat trimming, then pointing again is not about increasing the BC, it is about making the BC consistent from bullet to bullet. That results in smaller group sizes at long range.

                Berger and Sierra now point many of their competition bullets, so trying to point them again will actually ruin them.
                Thanks perfect anwser

                Comment

                • #9
                  LynnJr
                  Calguns Addict
                  • Jan 2013
                  • 7959

                  xEdward
                  When you close up the meplat you want it just to be closed and not pushed real hard or you will bulge the bullet jacket.
                  If your using Sierra or Berger bullets they need to be sorted first or you will not see the benifit of tipping.

                  Highpower790
                  The polymer tips traditionally give you better ballistic uniformity on mass produced bullets and that is why tipping bullets came into vogue
                  With a traditional hp bullet the pin gets thinner and thinner as the meplat gets closed and they tend to break slowing down production.
                  If you want tipped bullets but dont want to buy a tipping die give Bob Cauterucio a call at GTB bullets. He offers this service on his bullets for a very modest fee.
                  Lynn Dragoman, Jr.
                  Southwest Regional Director
                  Unlimited Range Shooters Association (URSA)
                  www.unlimitedrange.org
                  Not a commercial business.
                  URSA - Competition starts at 2000 yards!

                  Comment

                  • #10
                    highpower790
                    Veteran Member
                    • Jun 2013
                    • 3481

                    IF a polymer tip bullet is equal to a tipped bullet would shooters still tip there bullets.I like to think my time is worth something,so I would shoot the AMAX and be done with it.
                    How much time does it take to tip bullets for a typical match?The concept or idea of tipping bullets is new to me.I currently use AMAXs and really like those based on cost and being competitive with other bullets shooters use.
                    Last edited by highpower790; 01-24-2015, 3:46 PM.
                    Keep it simple!

                    Comment

                    • #11
                      bsumoba
                      Veteran Member
                      • Sep 2012
                      • 4217

                      Originally posted by highpower790
                      IF a polymer tip bullet is equal to a tipped bullet would shooters still tip there bullets.I like to think my time is worth something,so I would shoot the AMAX and be done with it.
                      How much time does it take to tip bullets for a typical match?The concept or idea of tipping bullets is new to me.I currently use AMAXs and really like those based on cost and being competitive with other bullets shooters use.
                      I don't thing the A-Max's can even come close to the bullets we shoot from a BC standpoint and that's without tipping them. Imagine getting an extra 2-8% from tipping, then the hybrid's and vlds and high BC scenar and SMKs just runs away from the A-Max.

                      You can still shoot them. Just know that you will most likely be holding or dialing for more wind and elevation than someone shooting the same caliber and weight bullet as you.

                      It took me less than 5 seconds per bullet to tip them in my press. I don't meplat trim yet, but will probably do it if I see an advantage.
                      Visit- www.barrelcool.com
                      The Original Chamber Flag and Barrel Cooler in 1
                      Instagram: barrelcool_

                      Comment

                      • #12
                        LynnJr
                        Calguns Addict
                        • Jan 2013
                        • 7959

                        Highpower 790
                        The polymer tipped bullets are very consistent as far as the meplat is concerned.
                        To get the most out of your bullets they need to be sorted as well then spun on a Juenke Machine.
                        Lynn Dragoman, Jr.
                        Southwest Regional Director
                        Unlimited Range Shooters Association (URSA)
                        www.unlimitedrange.org
                        Not a commercial business.
                        URSA - Competition starts at 2000 yards!

                        Comment

                        • #13
                          LynnJr
                          Calguns Addict
                          • Jan 2013
                          • 7959

                          Brian
                          Get youraself a meplat trimmer.

                          Trimming the meplats is important for uniform ballistic consistency and pointing brings the the BC number back up after the trimming. Trimming is to improve your accuracy and tipping is to raise the bc number to what you started with or a small amount more.

                          The trimmer from montour county rifles deburrs the meplat which is a big plus.When you down trimming your meplats run your thumbnail up the ogive to the meplat. Spin the bullet to 3-4 different places and if you feel a burr re-trim the meplat to remove it.

                          A burr even a small one at 240,000 rpm will throw your bullet off course
                          Lynn Dragoman, Jr.
                          Southwest Regional Director
                          Unlimited Range Shooters Association (URSA)
                          www.unlimitedrange.org
                          Not a commercial business.
                          URSA - Competition starts at 2000 yards!

                          Comment

                          • #14
                            Rbutler
                            Senior Member
                            • Jul 2009
                            • 675

                            at 300 yards you wont notice it much, you get between -10% and +10% BC change but the most important thing is you get consistency. and if you reload you know that you can consistently do something wrong but if you do it wrong consistently you can be accurate.

                            IE a lower BC that is the same for all projectiles is better then a higher BC that is +/- 4%
                            primer, powder, projecile, press, load, fire repeat!

                            Comment

                            Working...
                            UA-8071174-1