Chamfer & deburing options

[firemanjoe]

I have a lyman accutrimmer and was wondering if there are any options like the rcbs offers with their 3 in 1 trimming head (trim, chamfer, and debur all in one step). Does Lyman make anything like this?

Thanks

[Sub95]

I have the rcbs and it has never worked like you think it should.

So I do it in two steps but I use a drill instead of turning it by hand. So I trim cases then debur

Depending on what the cutter thread size you might be able to use The rcbs 3 way.

[Spyder]

Get a Giraud.

[kdsd731]

I love my Giraud!

[Sub95]

does it do all three? trim, debur inside/outside.

[Spyder]

Trim, debur, and inside/outside chamfer. Takes about 1 second per piece of brass.

It's pricey, but VERY worth it if you do several different calibers in large numbers. They also have a drill mounted one for a single family of calibers for 90 bucks.

[highpower790]

Gracey with a carbide bit .

[Bumslie]

As far as I know, Lyman does not offer a 3-1 cutter option.

I use a Forster trimmer with 3 way attachment. It's very accurate and repeatable. It trims, Chamferd and deburs lightning fast, only a few turns on the handle. It suits my shooting needs. I suggest looking into one.

There is an option for a power screw driver attachment of you would like.