Unconfigured Ad Widget

Collapse

38 primer vs light trigger issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Toy4Rick
    Member
    • Oct 2010
    • 269

    38 primer vs light trigger issue

    Hey gang,

    Just got my wife's S&W 686 back from a trigger action job. 2.5lbs single action, very smooth and light.

    We shot 100 rounds of my reloads yesterday and about a dozen required a second hammer strike and 1 required 3 strikes, pretty high failure rate

    Mixed brass using Tulammo SPP, target loads. My wife needs light trigger/hammer due to hand issues

    With that being said, I need more primers, so what do you recommend?
    1) move to a softer primer or
    2) heavy up the hammer main spring or
    3) ???

    Thanks in advance
    Rick
  • #2
    devster55
    Senior Member
    • Nov 2012
    • 2095

    I would try a cci primer or a win primer. I have some older cci primers that I got for free. If you are local I can give you 100 to try out. Also have you shot them in a different gun to see if the problem carrys over? And make sure the primers are seated properly that can cause this issue as well.
    Good friends will come bail you out of jail. A best friend will be sitting next to you in the cell saying damn that was fun!

    Comment

    • #3
      Toy4Rick
      Member
      • Oct 2010
      • 269

      Sorry, I should have mentioned that we have shot over 9k of these primers in my Baretta PX4 Storm 9mm and my brothers Baretta 92FS 9mm and his S&W model 66 with maybe half dozen total which were due to the primer not being seated deep enough. Other than that they have been very good primers

      Fabulous offer thank you, however I live in San Diego

      Thanks
      Rick

      Comment

      • #4
        devster55
        Senior Member
        • Nov 2012
        • 2095

        Yeah I use tula as well for most plinking rounds as well. I would just try a different primer and go from there.
        Good friends will come bail you out of jail. A best friend will be sitting next to you in the cell saying damn that was fun!

        Comment

        • #5
          pacrat
          I need a LIFE!!
          • May 2014
          • 10287

          Majority of bullseye target shooters with super light triggers/hammers go with FEDERAL spp.

          They require lighter strikes than any other brand.

          JM2c

          Comment

          • #6
            9mmepiphany
            Calguns Addict
            • Jul 2008
            • 8075

            The usually answer is to move to Federal primers, might you might be able to get by with Winchester.

            Light revolver hammers have a hard enough time with CCI, much less Tula
            ...because the journey is the worthier part...The Shepherd's Tale

            Comment

            • #7
              ejhc11
              Senior Member
              • Aug 2010
              • 1214

              Check your strain screw on the revolver. It may be set too light. One way to lighten a trigger is to unscrew that strain screw which equals a very light hit on the primer.

              I had that same problem - unfortunately you may need to have a harder trigger pull which I had to do.

              Hope that helps or solves the issue.

              Comment

              • #8
                Eljay
                Veteran Member
                • Oct 2005
                • 4985

                Federal is definitely the softest. You might also make sure you're really seating the primers in fully - they should be inset quiet a bit. A lot of guns can deal with them being very slightly off but I had a particular revolver that made me really have to get careful about that. My notion of a high primer went from anything sticking out to realizing that if they're flush they're still too high - they need to be inset quiet a bit.

                Comment

                • #9
                  Cowboy T
                  Calguns Addict
                  • Mar 2010
                  • 5725

                  Yes, Federals are softer. If the spring's been lightened, this may help in your situation. I've found that the Tula primers are very similar to the CCI's when it comes to primer cup hardness.

                  That said, I had a very nice trigger job done on my S&W M64, too. This was a recent model with the new safety-bar-style hammer and trigger. All he did was polish the surfaces, and that made it silky smooth and easy to pull. No spring adjustment was necessary. Because of that, my trigger strikes are just as firm as they were before, and my cameralady absolutely loves the trigger pull.
                  "San Francisco Liberal With A Gun"
                  F***ing with people's heads, one gun show at a time. Hallelujah!
                  http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
                  http://www.liberalsguncorner.com (podcast)
                  http://www.youtube.com/sfliberal (YouTube channel)
                  ----------------------------------------------------
                  To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.

                  Comment

                  • #10
                    Sheldon
                    Senior Member
                    • Oct 2005
                    • 2149

                    As mentioned the Federal primers are generally considered the softest one out there. You need to take care to seat the primers solidly. There is also an extended firing pin you could try for better reliability.

                    Comment

                    • #11
                      mjmagee67
                      Veteran Member
                      • Jun 2011
                      • 2771

                      A revolver with a trigger job you say! FEDERAL primers are the best bet.

                      Your second bet would be an extended firing pin!

                      Your worst bet would be Tula SPP they are known to be the hardest. My personal luck with Tula SPP's has been a 10% failure rate.
                      If you want change you have to put in your 2 cents, you can't just sit on the sidelines and whine.

                      Comment

                      • #12
                        sniper5
                        Senior Member
                        • Jan 2007
                        • 723

                        Another vote for Federal. My wife's GP100 has the lightest Wolff springs and she has never had a misfire with Federals. Failure rate on all the others she's tried run between 10 and 20%.
                        NRA Lifetime Member
                        Omnes Venient

                        Comment

                        • #13
                          tujungatoes
                          Calguns Addict
                          • Dec 2006
                          • 7942

                          +1 for Federal.
                          sigpic
                          Originally posted by Dr. Elky
                          If your a man who wears white sunglasses, your probably a douche bag
                          Originally posted by CSACANNONEER
                          I've been know to cross dress and go the other way at certain events.

                          Comment

                          Working...
                          UA-8071174-1