Unconfigured Ad Widget

Collapse

High Pressure Issues (Help)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #31
    hylander
    Veteran Member
    • Oct 2005
    • 3872

    Originally posted by J-cat
    That's pretty much it. I dunno why you're tossing the brass when you can simply reduce the load.
    Tossing it because I only have a little of it and I usually only use Winchester and Federal brass.
    Failure is not an Option

    Comment

    • #32
      hylander
      Veteran Member
      • Oct 2005
      • 3872

      Life is good again
      It was the brass.
      I loaded up a few different loads with Win brass and also shot some factory Fed loads with no issues and sub Moa accuracy.

      Now if I could just find some Winchester brass
      Failure is not an Option

      Comment

      • #33
        JMP
        Internet Warrior
        CGN Contributor - Lifetime
        • Feb 2012
        • 17056

        Your bolt is probably a bit loose. You'll just need to run a bit lighter pressure. This is why it's helpful to have a high quality action. But, as long as you get what you need from the rifle, it's no biggy.

        Comment

        • #34
          hylander
          Veteran Member
          • Oct 2005
          • 3872

          Originally posted by JMP
          Your bolt is probably a bit loose. You'll just need to run a bit lighter pressure. This is why it's helpful to have a high quality action. But, as long as you get what you need from the rifle, it's no biggy.
          I'm pretty sure that was dig against my Ruger
          I know the Rugers generally are not on the top of the list, but this one has always shot well under MOA.
          Failure is not an Option

          Comment

          • #35
            J-cat
            Calguns Addict
            • May 2005
            • 6626

            Originally posted by hylander
            Life is good again
            It was the brass.
            Going with brass having three more grains of water capacity and thereby lowering pressure to the low 40,000 PSI range does not support your statement.

            Comment

            • #36
              Ahhnother8
              Senior Member
              • Feb 2007
              • 1454

              Originally posted by hylander
              Now if I could just find some Winchester brass
              How many do you need?

              Comment

              • #37
                hylander
                Veteran Member
                • Oct 2005
                • 3872

                Originally posted by J-cat
                Going with brass having three more grains of water capacity and thereby lowering pressure to the low 40,000 PSI range does not support your statement.
                What statement are you referring to ?
                If you are referring to 'it was the brass".

                It must be the brass, since once I changed that variable the issue is gone.
                Last edited by hylander; 11-30-2014, 7:58 PM.
                Failure is not an Option

                Comment

                • #38
                  hylander
                  Veteran Member
                  • Oct 2005
                  • 3872

                  Originally posted by Ahhnother8
                  How many do you need?
                  I could use at least 100
                  Failure is not an Option

                  Comment

                  • #39
                    spamsucker
                    Banned
                    • Jun 2012
                    • 701

                    so OP didn't learn his lesson then. It's all fun and games till someone loses an eye.

                    Comment

                    • #40
                      J-cat
                      Calguns Addict
                      • May 2005
                      • 6626

                      Originally posted by hylander
                      What statement are you referring to ?
                      If you are referring to 'it was the brass".

                      It must be the brass, since once I changed that variable the issue is gone.
                      No offense, but tuning your load with brass is kinda weird.

                      Comment

                      • #41
                        JMP
                        Internet Warrior
                        CGN Contributor - Lifetime
                        • Feb 2012
                        • 17056

                        Originally posted by hylander
                        I'm pretty sure that was dig against my Ruger
                        I know the Rugers generally are not on the top of the list, but this one has always shot well under MOA.
                        No, the bolt fitting on most factory rifles can be hit or miss. For production line rifles, they make a bunch of receivers and a bunch of bolts. They need to leave enough room for bolts to fit the receivers. Some will have more play. This can give you some stickiness.

                        Comment

                        • #42
                          hylander
                          Veteran Member
                          • Oct 2005
                          • 3872

                          Originally posted by J-cat
                          No offense, but tuning your load with brass is kinda weird.
                          No offense taken.
                          Not trying to tune the load, just wanting to figure out why the sticky bolt and flat primers.
                          I checked and changed everything else one thing at a time.
                          Once the brass was changed the issue is gone. All other reloads work fine and factory ammo works fine.
                          That leads me to the conclusion that the brass was the issue. This rifle has worked flawless for over 30 years until I used CBC brass.
                          Failure is not an Option

                          Comment

                          • #43
                            hylander
                            Veteran Member
                            • Oct 2005
                            • 3872

                            Originally posted by spamsucker
                            so OP didn't learn his lesson then. It's all fun and games till someone loses an eye.
                            What lesson ?
                            Failure is not an Option

                            Comment

                            • #44
                              J-cat
                              Calguns Addict
                              • May 2005
                              • 6626

                              Originally posted by hylander
                              No offense taken.
                              Not trying to tune the load, just wanting to figure out why the sticky bolt and flat primers.
                              I checked and changed everything else one thing at a time.
                              Once the brass was changed the issue is gone. All other reloads work fine and factory ammo works fine.
                              That leads me to the conclusion that the brass was the issue. This rifle has worked flawless for over 30 years until I used CBC brass.
                              Do you understand why the brass was the issue?

                              Comment

                              • #45
                                hylander
                                Veteran Member
                                • Oct 2005
                                • 3872

                                Originally posted by J-cat
                                Do you understand why the brass was the issue?
                                The only thing I can think of is the thickness of the brass, less case capacity.
                                Failure is not an Option

                                Comment

                                Working...
                                UA-8071174-1