Roll sizing services

[ParaLarry]

Need roll sizing service in So Cal preferably San Diego. Several k's of .40 brass with Glock bulge my undersized die will not fix.
Mail order or drop off.
Thanks!


Sent from my reloading bench using Tapatalk

[Wrangler John]

Did you try this die, it's made just for that purpose:

http://redding-reloading.com/index.php?option=com_content&view=article&id=3%3Ag-rx-push-thru-base-sizing-die

A sizing die can't reach the bulge due to shell holder interference, the case needs to be pushed all the way through the sizing ring.

Buy it here: http://www.grafs.com/retail/catalog/...roductId/16318 with shipping included.

Or buy it here without shipping: http://www.sinclairintl.com/reloadin...prod39741.aspx

Or if you're strapped for cash try this one: http://leeprecision.com/case-conditi...ge-buster-kit/ You can order direct from LEE, or try the vendors above.

You may also want to check out this die to maintain a better fit for the brass, but you'll still need a push through die. http://redding-reloading.com/index.p...g-carbide-dies

[longrange99]

Larry -

I recently bought the G-RX die and it is really fast in a single stage. You can get an adapter and bottle which hold a couple hundred cases. Run them through the single stage then off into the progressive. Rounds all size correctly now in the shell gauge

[jdmstuff]

I have the LEE bulge buster kit. It works well but I got tired of having to do the extra step while reloading. I simply stopped shooting .40 altogether.

[ParaLarry]

Thanks for the suggestions. I was hoping someone had a CasePro nearby that could run thousands for me so I wouldn't have to use my arm.


Sent from my reloading bench using Tapatalk