Unconfigured Ad Widget

Collapse

Progressive Presses

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    John Browning
    Calguns Addict
    • May 2006
    • 8089

    Originally posted by BajaJames83
    what kind of volume are you looking to get?
    300-400 hr is good for the 550 and its so easy to setup and run
    This is the right question.

    I had a LNL. It was OK. It had some minor issues. I read about how Dillon will take old cardboard boxes and lawn clippings and turn it into match grade benchrest ammo. I finally picked up a 550. Liked the 550 even less. Bought another LNL.

    For me, the LNL is the best machine. I might only load a batch of 300-500 rounds at a time between a caliber swap and probably only load 10,000ish rounds a year at this point. The LNL does plenty fine. I agree with this guys conclusions completely:

    For Sale: Off Roster Handgun Moving Sale

    For Sale: Off Roster CZ, Browning, PTR 91 Moving Sale

    Originally posted by KWalkerM
    eh why bring logic into this, that makes too much sense... besides when you have bested a fool, you have accomplished nothing and he is a fool.

    Comment

    • #17
      Cowboy T
      Calguns Addict
      • Mar 2010
      • 5725

      For any rifle rounds (the few that I've done), I do those on a Lee Classic Turret Press.

      For any handgun rounds, I use the Lee Pro 1000.

      All progressive presses, including Dillons and Hornadys, require a bit of maintenance here and there. The Pro 1000 is no exception. It is not built battleship-strong like an RL-550B. But it sure turns out bucketloads of quality ammo for me, mostly .38 Special and .45 Colt, without much trouble.
      "San Francisco Liberal With A Gun"
      F***ing with people's heads, one gun show at a time. Hallelujah!
      http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
      http://www.liberalsguncorner.com (podcast)
      http://www.youtube.com/sfliberal (YouTube channel)
      ----------------------------------------------------
      To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.

      Comment

      • #18
        shinzen
        Member
        • Jul 2013
        • 231

        Used the Pro-1000 for pistol, 223, and 7.62x39. Honestly, it does well, but haven't tried blue yet. Also run a classic turret for most of my other rifle ammo. If you keep the primers full and don't use the bullet feeder (unless you're up for some tinkering) it will run just fine on both with no issue. CowboyT's videos were an immense help to get started.

        Comment

        • #19
          David-K
          Senior Member
          • Dec 2012
          • 745

          Originally posted by scobun
          This is the right question.

          I had a LNL. It was OK. It had some minor issues. I read about how Dillon will take old cardboard boxes and lawn clippings and turn it into match grade benchrest ammo. I finally picked up a 550. Liked the 550 even less. Bought another LNL.

          For me, the LNL is the best machine. I might only load a batch of 300-500 rounds at a time between a caliber swap and probably only load 10,000ish rounds a year at this point. The LNL does plenty fine. I agree with this guys conclusions completely:

          http://www.comrace.ca/cmfiles/dillon...Comparison.pdf
          Excellent post. I was trying to find that article when I posted up and couldn't find it. It was because of that comparison that I chose the LnL.
          "Well, looky here. If it ain't the fuzz".

          Comment

          • #20
            at_liberty
            Senior Member
            • Jun 2010
            • 699

            Originally posted by DeskHunter
            I know you said that you were considering getting either the 550 or 650, but i strongly recommend looking at the Hornady Lnl AP as well. People are selling entire set-ups on the marketplace with the case feeder for around 475 to 580. You could invest the money that you would have spent on a xL 650 for different shell plates and dies of other calibers, or reloading components. I chose a Lnl AP after months upon months of deliberating and came to the conclusion to go with Hornady. It's a great press that can process many rounds very quickly.
            I use an LnL AP too, but I would qualify that a used one may not include the latest subplate, which is neither free nor cheap. You also will value having the latest versions of shellplates, all intended to relieve a quirk (complaint). Buy the used (maybe) but don't assume the price is all you will have to spend or that it compares directly with a new one. Hornady is rather quiet about upgrades, waiting for you to call, so you have to seek out the LnL community to stay up to date and get support.

            Comment

            • #21
              kdsd731
              Senior Member
              • Dec 2011
              • 663

              I'm very happy with my lnl ap. For me, it did take a lot of tinkering to get dialed in but once it was right it doesn't need much adjustment. I only have to do minor adjustments while doing caliber swaps because I also use the case/pistol bullet/rifle bullet feeders.

              Comment

              • #22
                9mmepiphany
                Calguns Addict
                • Jul 2008
                • 8075

                I've got my LNL AP up and running and you do have to keep on top of the upgrades. They'll provide them, but you'll have to ask for them. You do have to remember to check for tightness every 1k rounds

                What sold me on the LNL was the ability to use it as a SS or a Turret as the mood struck me...without having to adjust the dies as I removed or replaced them. The jewel of the LNL is the powder measure and the half rotation of the shell plate.

                I'm currently helping a friend rehab a 650 and can understand how it is a solid beast once you get it all set...but I also now understand why it is a bit fussy to set up. Very different design philosophy from the LNL
                ...because the journey is the worthier part...The Shepherd's Tale

                Comment

                • #23
                  the86d
                  Calguns Addict
                  • Jul 2011
                  • 9591

                  Same 2 calibers (9mm and .223), and I started on an XL 650, and I wouldn't trade it for any single-stage experience...

                  I am pseudo-mech.-inclined.

                  If you don't bring it down all the way (well, most of the way), it doesn't index.

                  Comment

                  • #24
                    enzo357
                    Senior Member
                    • Aug 2009
                    • 559

                    Started with a 550, upgraded to a 650. The 650 does a lot of rounds fast. It takes a little longer to change calibers and takes a little more upkeep than my 550. I shoot a lot, so the 650 is well worth it.

                    Comment

                    • #25
                      CGT80
                      Veteran Member
                      • Jul 2008
                      • 2981

                      Go big or go home! Dillon 1050


                      OK, so you don't have the money for the 1050. My brother is in the same boat. He needs to load 40 s&w and 223. He has decided on the 650. It is made for feeding rifle brass and is auto indexing. He was thinking about a swage tool for the 650, but they have some drawbacks.

                      I have a 550 and I modified the press to feed 30-06, 30-30, 243, 460 mag, etc. in the casefeeder. It isn't perfect, but it is much better than feeding by hand. I also have a 1050 and Mr. Bulletfeeder to load 9mm, and I just converted the press to load 40 S&W. I would do all my loading on the 1050 if I could afford the conversions and toolheads. The 550 has served me very well, but the 650 would have fit my needs better. I have not used a 650, but have read about the priming system and seen photos and videos of it. It seems like the 550 and 1050 have a better design for priming, but that doesn't mean it won't get the job done.

                      Go for the 650.
                      He who dies with the most tools/toys wins

                      Comment

                      • #26
                        JMP
                        Internet Warrior
                        CGN Contributor - Lifetime
                        • Feb 2012
                        • 17056

                        This is probably a pretty fair comparison.

                        For me, when it comes to reloading, it's really the dies that I focus on. The rest is more controllable by the user. Though you can switch out die brands, I like the Dillon dies far above the other two. Dillon makes, in my opinion, very good dies for pistol shooting. The sizing/decapping die really lasts and punches through the nastiest primers that you'd want to reload for; otherwise, the clip on the top will just bust off and you are still good by just replacing that little clip.

                        I am biased against Hornady because I find their dies to be tragic, and the manufacturing tolerances used for their bullets and brass is sub-par on the rifle side. Admittedly, I am somewhat of a snob in that respect. What Hornady does well is they make absolutely everything reloading related and provides one-stop shopping for budget/value oriented customers. They do a lot of things okay to decent, but I have yet to find them do anything great.

                        The best thing Hornady has ever done was come out with the 6.5 CD cartridge, but the Nosler brass that is now available is leagues better. If you shop around, you will see the Nosler and Norma brass all sold out for twice the price. I have not even seen a Norma case for 6.5 CD, but they did start making it this year.

                        Comment

                        • #27
                          Tom-ADC
                          Veteran Member
                          • Apr 2010
                          • 3614

                          I've had a 550 for maybe 20 years, does everything I need, I reload 9MM to 45-70 on it. Just a easy to use press that cranks out quality ammo.
                          US Navy Retired, NRA Lifetime member. Member CRPA

                          Comment

                          • #28
                            tamalpias
                            Senior Member
                            • Aug 2009
                            • 1984

                            since this thread is still fresh, May I ask how much does it cost to swap calibers on a dillion 650? I noticed a tool head with powder measure and conversion kit is $230 to convert calibers? If that is so then it's a bit pricey to change calibers :-/

                            Comment

                            • #29
                              Mot Mi
                              Senior Member
                              • Aug 2013
                              • 1061

                              I thought it was 80 dollars for a conversion it or was it 100? I dont know but look on brianenos.com I believe is brians site.

                              Comment

                              • #30
                                tamalpias
                                Senior Member
                                • Aug 2009
                                • 1984

                                Originally posted by Mot Mi
                                I thought it was 80 dollars for a conversion it or was it 100? I dont know but look on brianenos.com I believe is brians site.
                                it is 80 for the conversion kit but you will also need the tool head and powder measure if you want to keep things consistent and be able to change out calibers at a decent rate

                                Comment

                                Working...
                                UA-8071174-1