what am I doing wrong...

[phonso302]

Lee auto disk powder drop upgraded hopper and charge bar. Work perfect with 1200r... went to set up for 9mm / titeGroup.. I cant get a steady Drop it wont drop anything less then 5gr. Drops about 4 charges and then stops and backs up. What im i doing wrong. Its driving me nuts.

[Mot Mi]

I heard the auto disk doesn't like to drop low charge weights. I could be wrong though. Hopefully, someone with more experience will chime in.

[Leadingall]

My auto disk loads titegroup at 4.0 gr just fine and super consistently. I'm thinking you're using the wrong size disk hole or maybe the measure needs to be cleaned?

[AeroEngi]

I agree that a good cleaning would help.

[BigBronco]

They are plastic, static electricity? Might try wiping everything down with a dryer fabric softener sheet before assembly.

[phonso302]

I'm not using the disc's. I'm using the charge bar. Its a new unit.

[8mmFMJ]

My hopper didn't load right until I took it apart and sprayed it with cleaner, gave it a good polish.

[phonso302]

Going to take everyone's advice and tear everything down and clean it and use a dryer sheet.... I will post up later today

[MongooseV8]

Titegroup is great at clumping together and clogging up the tiny holes in low charge weights. I had a heck of a time with titegrouo and ended up switching powders. Doesnt really help you, but that was my experience.

[phonso302]

so i tore everything down washed and cleaned everything up. same problem. i switched out the charge bar for the disc and now its throwing a consistent 4.0gr with a 4.2gr here and there.

[AeroEngi]

so i tore everything down washed and cleaned everything up. same problem. i switched out the charge bar for the disc and now its throwing a consistent 4.0gr with a 4.2gr here and there.

Why don't you just stick with the discs? I know the charge bar is nice in theory but if it's not throwing charges consistently then there's no point in using it.

[rccar]

I tried both the disk and charge bar, and found the disk to be more consistent.

[phonso302]

Why don't you just stick with the discs? I know the charge bar is nice in theory but if it's not throwing charges consistently then there's no point in using it.

thats what i will be using... i have the complete opposite happen with 1200r it hates the disc and works perfectly with the charge bar....

[Leadingall]

Yeah, I much prefer the disks, I'll walk away from the press for a week or 2, come back and it's still throwing perfect charges.