Portable reloading stand??

[8mmFMJ]

That is sweet. Would you mind sharing more details or linking to a thread where you have already done so?

http://www.calguns.net/calgunforum/showthread.php?t=669370

[Michael in California]

http://www.calguns.net/calgunforum/s...d.php?t=669370

Thank you kindly. I seem to have vague memories of reading this before...

[TheExiled]

I have one of these: http://www.homedepot.com/p/BLACK-DEC...g&gclsrc=aw.ds

I cut a 1" piece of plywood with my press and equipment on it and put 4 C-clamps on it to hold it on. I built it to be portable while I was moving as well as have an option to bring it inside or onto the back porch, but my living situation changed and now this is my fulltime bench. I keep a foot on the bottom and it works great.

[CK_32]

I have one of these: http://www.homedepot.com/p/BLACK-DEC...g&gclsrc=aw.ds

I cut a 1" piece of plywood with my press and equipment on it and put 4 C-clamps on it to hold it on. I built it to be portable while I was moving as well as have an option to bring it inside or onto the back porch, but my living situation changed and now this is my fulltime bench. I keep a foot on the bottom and it works great.

How sturdy is that one? I tried the HF version of that food table and the boards bent and it cricked just from putting my palm on the top and pushing down. Didn't pass my quality test.

But looks handy.

[SonofWWIIDI]

http://precisionrifleblog.com/2012/11/12/portable-reloading-press-plans/

Mount on any legs or other support structure you choose.

[Bumslie]

http://precisionrifleblog.com/2012/1...g-press-plans/

Mount on any legs or other support structure you choose.

Or if you're too lazy to build it, buy one

http://www.sinclairintl.com/reloading-equipment/reloading-presses/reloading-press-accessories/sinclair-wooden-press-stand-prod37267.aspx

[VAReact]

I use this as my full-time bench, but had to create my own plywood top. The included MDF top a bit too flimsy.

http://www.harborfreight.com/adjustable-height-heavy-duty-workstation-46725.html

I went this route as well. Works great with added plywood top.

[John Joseph]

Which model Jeep?

[huckberry668]

I used the Lee Hand Press for load development at the range and when my home was too small.

A portable work bench is best. I use one of these for over 20 years. Light, cheap, adjustable and truly portable.

http://www.blackanddecker.com/power-tools/WM125.aspx

[CK_32]

Or if you're too lazy to build it, buy one

http://www.sinclairintl.com/reloading-equipment/reloading-presses/reloading-press-accessories/sinclair-wooden-press-stand-prod37267.aspx

This was EXACTLY what I had in mind of building!

[CK_32]

Which model Jeep?

'00 Jeep Grand Cherokee

[bohoki]

i reload 9,45acp,223 on a press clamped to a wood stool

i take 308 out on the picnic bench to do cause it takes more force


the trick is to first mount your press to 1 square foot of 3/4 ply with elevator bolts

[Whiterabbit]

nice thing about a box is that, on its side, you have a wind-sheilded place to measure charges.

[SonofWWIIDI]

This was EXACTLY what I had in mind of building!

The link in my post (#35) has the plans for it.

[Whiterabbit]

Don;t forget the wind screen for measuring charges