Unconfigured Ad Widget

Collapse

Which one?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    iMigraine
    Senior Member
    • Nov 2011
    • 896

    Originally posted by jericho89
    How much do you plan to shoot and reload.......

    If you are shooting a lot then get a progressive, The Dillon 650 can easily do 600-800 per hour in 9mm, 38/357, and .223. I prefer a single stage rockchucker for the larger rifle. If you are not looking for volume then a good single stage, powder drop, and a hand primer will do you well, you can load 100-150 per hour if you know your equipment.

    I would say that for what you are looking to may want both a progressive (for volume) and a single stage (for the large rifle).

    There is a great difference in cost and it all comes down to cost vs benefit and what equipment you are willing to invest in.
    +1
    Attend a reloading clinic through Calguns or any local gun store that offers them. Pester your friends that reload to see their setups and hopefully they have a progressive and a turret or single stage to learn from. For me, I'm a low volume shooter and have time. So I have time to reload between outings. A Lee Classic Turret with the cast iron base was perfect for me. My friend's Dillon 550B (his is actually an older model but closer to this) is awesome, super fast. But too expensive for my meager budget. I found myself making way too many mistakes on his Dillion. My other friend has a RCBS Rockchucker. Really nice single stage press. Since I reload mainly pistols for now and 7.62x39 later, a turret press is faster and easier to setup for different calibers. Oh, Reloading becomes another hobby in its self. I enjoy making specific loads for my shooting needs and comparing them with factory loads.
    sigpic

    No Agenda Podcast - Obedience is best.

    Comment

    • #17
      bullitt3123
      Member
      • Apr 2013
      • 174

      Originally posted by jericho89
      You can get a good rockchucker for not that much (I run across used ones often). That press can do just about any caliber, they have a small footprint, and are just about indestructible. hand primers are inexpensive and a powder can either be weighed out one load at a time or if you pick up a powder dispenser they will speed up the process (I still take a sample weight every number of rounds to verify the weight).

      Single stage is not that bad because you do things in batches. You take all of the brass and de-prime. Then hand prime all of the brass. Change your die and use the powder die to size the mouth of all the brass. Use a tray and put powder in all of the brass. Change your die and seat all of your bullets. If you have a factory crimp die that is an extra step.

      As stated before the single stage press is in almost every progressive owners bench and it comes in handy to fix issues that happen with a progressive.

      Where are you located? There may be some members close that would be willing to show you their setups and help you make up your mind.
      I'm located in Chico up north

      Comment

      • #18
        bullitt3123
        Member
        • Apr 2013
        • 174

        Well given that I'm in college I would love to shoot as much as I can but given my work and school I cant shoot that often so the plan is to shoot between 0-400 rounds per month

        Comment

        • #19
          jericho89
          Senior Member
          • Aug 2011
          • 1129

          Too far north for me, but I am sure there are some people up there.

          As for what you want to shoot find an affordable unit that is in your budget. For the amount you are looking to shoot if it were me I would go single stage. There are a few that can be converted to a progressive. I have never dealt with them, but another option.

          Keep an eye out for reloading clinics and anyone in your area that you can either watch them or if they will let you run a few of your rounds through the machine to see what you like. If we were closer I would let you run some.

          Comment

          • #20
            bullitt3123
            Member
            • Apr 2013
            • 174

            Thanks for the offer Jericho, seems like the best step forward for me is to get a single stage. Let me know is this right....Lee<rcbs<hornady,dillon<redding?

            And as far as equipment I'm going to need press,dies,hand primer, powder dispenser,scale?

            Comment

            • #21
              9mmepiphany
              Calguns Addict
              • Jul 2008
              • 8075

              Originally posted by bullitt3123
              And as far as equipment I'm going to need press,dies,hand primer, powder dispenser,scale?
              ...also:
              1. powder dispenser stand
              2. loading trays
              3. case lube
              4. calipers
              5. case gauge
              6. shell holder
              7. loading manuals
              8. vibrating case cleaner
              9. case/media separator

              That's just for handguns. For rifle reloading you'll need more stuff
              Last edited by 9mmepiphany; 10-14-2014, 8:18 PM.
              ...because the journey is the worthier part...The Shepherd's Tale

              Comment

              • #22
                jericho89
                Senior Member
                • Aug 2011
                • 1129

                I would go that route. As for which one... I have had the lee and it was on the light duty side and I got rid of it pretty quick. Got a RCBS and it is a work horse, will take any caliber I put in it with no flex. I do not think Dillon has a single stage, but if they do you can not go wrong with a Dillon. I have never heard anything bad about a Hornady or Redding, but never had one so can not give an honest opinion about them.

                If later on you feel that you would benefit from a progressive then save up and buy the best one that you can afford. You should only buy it once. I got a used Dillon 650 over 12 years ago and it is still running strong, and they have a no BS warranty. They have replaced worn parts for free, and if I wanted I can send the press back and they will do a full rework of it and send it back as new.

                As far as the equipment you need you have hit all the main points as well as what 9mmepiphany listed. The other things I would recommend is a bullet puller (they look like a hammer and use inertia to pull the bullet), shell holders depend on what dies you use, some die sets come with the shell holders. Do your research on dies, everyone will tell you theirs is the best, I have used Dillon, CH, RCBS, Redding, and Lee and all of them have done the job well. The right die can make up an entire new thread, but recommend carbide dies for pistol (no lube needed).

                The biggest advice I can give you is research as many different sources for reloading info... DO NOT take anyone's word about a load that is "best". Most all of the powder companies have online reloading data centers that will give you max and min loads (the downloadable reloading data is basic and only gives max). I use cut and past to grab all of the online data for the calibers I deal with and made my own spreadsheet that I can refer to without being on line. I recommend start at the min and work your way up. I have gone out with a box of ammo that was loading with 5 rounds of each power from min and went up a grain at a time. I found what worked best in the gun I was loading for and pulled all of those that were above the power that I wanted. The single stage is great for finding the perfect load.
                Last edited by jericho89; 10-14-2014, 8:26 PM.

                Comment

                • #23
                  jericho89
                  Senior Member
                  • Aug 2011
                  • 1129

                  also loading trays can be made, I have never owned a production tray, I just made some with wood, drill, and drill press. Ok I can be a cheap s.o.b. at times

                  Comment

                  • #24
                    JagerDog
                    I need a LIFE!!
                    • May 2011
                    • 15874

                    I always recommend a single stage (or turret like the redding) first. They are superior for large rifle rounds. They'll always have purpose.

                    The really nice thing about the T7 is 7 holes gives you two full calibers of pistol dies ready for action once set up. Need to back up a step? No problem.

                    I say get intimately familiar with each operation before you go and have multiple operations happening at once. A single hole single stage may be on the slow side, but produces good ammo, good habits, and knowledge retention for adjusting dies, what those adjustments do, etc. Don't be in a big hurry to make a big mistake. Still pretty easy to make 1000+ pistol rounds in a weekend with SS.

                    If you're a big volume shooter with 1 primary caliber, above average mechanically inclined you can shortcut and go progressive. I just think it's a mistake for many. But then I really enjoy handloading (not just reloading).

                    It's a personal decision and you need to ask yourself some questions in order to arrive at the answer.
                    Last edited by JagerDog; 10-14-2014, 8:37 PM.
                    Palestine is a fake country

                    No Mas Hamas



                    #Blackolivesmatter

                    Comment

                    • #25
                      Mot Mi
                      Senior Member
                      • Aug 2013
                      • 1061

                      Tumbler, media for tumbler, calipers, case gauge but it isnt necessary.

                      Comment

                      • #26
                        9mmepiphany
                        Calguns Addict
                        • Jul 2008
                        • 8075

                        Do your research on dies, everyone will tell you theirs is the best, I have used Dillon, CH, RCBS, Redding, and Lee and all of them have done the job well. The right die can make up an entire new thread
                        I always found it interesting that the best seating die doesn't come in the same set as a good sizing die...and the best expander is from a completely different manufacturer.

                        My current 9mm set on my LNL has dies from RCBS, Lyman, Hornady, and Lee...and the difference in quality is very obvious when you have them mounted side-by-side
                        ...because the journey is the worthier part...The Shepherd's Tale

                        Comment

                        • #27
                          8mmFMJ
                          Calguns Addict
                          • Aug 2011
                          • 7405

                          I only reload large rifle cartridges. Pistol reloads are too cheap as is for me to spend my time doing 9mm. I have a hornady LNL single stage. I can load 200 prepped and primed cases in about an hour. Prepping 200 takes another hour plus tumble time.

                          Comment

                          • #28
                            bullitt3123
                            Member
                            • Apr 2013
                            • 174

                            Originally posted by 9mmepiphany
                            I always found it interesting that the best seating die doesn't come in the same set as a good sizing die...and the best expander is from a completely different manufacturer.

                            My current 9mm set on my LNL has dies from RCBS, Lyman, Hornady, and Lee...and the difference in quality is very obvious when you have them mounted side-by-side
                            so what would some decent dies be? i suppose i am asking what are the dies that you have found out to work the best

                            Comment

                            • #29
                              9mmepiphany
                              Calguns Addict
                              • Jul 2008
                              • 8075

                              I ran the question of ideal die set on another national forum and arrived at this; followed by the rationale

                              1. Lee or Lyman Carbide Sizing Die - longer carbide insert, easier sizing
                              2. Lyman Neck Expanding "M-Inch" Die - two step expander, retains neck tension
                              3. Hornady Bullet Seating Die - sliding collar helps guide aligned bullet into die; fewer caught fingers
                              4. Hornady Microjust Seating Stem - allows easy adjustment of seating depth
                              5. Lee Factory Crimp Die - resizes case again

                              I currently have RCBS Sizing and Seating dies, because they were available at too good a price to pass up.

                              The Hornady powder measure is a dream to work with...extra adjustment inserts, for favorite loads, are a better idea than the Micrometer one

                              The Lee FCD might have been overkill, but it addressed another problem I encountered with existing loads and was only $16

                              If I was starting from scratch, I'd get a Lyman 4-die set and add a Hornady Seating die
                              Last edited by 9mmepiphany; 10-15-2014, 12:19 PM.
                              ...because the journey is the worthier part...The Shepherd's Tale

                              Comment

                              • #30
                                bullitt3123
                                Member
                                • Apr 2013
                                • 174

                                Originally posted by 9mmepiphany
                                I ran the question of ideal die set on another national forum and arrived at this; followed by the rationale

                                1. Lee or Lyman Carbide Sizing Die - longer carbide insert, easier sizing
                                2. Lyman Neck Expanding "M-Inch" Die - two step expander, retains neck tension
                                3. Hornady Bullet Seating Die - sliding collar helps guide aligned bullet into die; fewer caught fingers
                                4. Hornady Microjust Seating Stem - allows easy adjustment of seating depth
                                5. Lee Factory Crimp Die - resizes case again

                                I currently have RCBS Sizing and Seating dies, because they were available at too good a price to pass up.

                                The Hornady powder measure is a dream to work with...extra adjustment inserts, for favorite loads, are a better idea than the Micrometer one

                                The Lee FCD might have been overkill, but it addressed another problem I encountered with existing loads and was only $16

                                If I was starting from scratch, I'd get a Lyman 4-die set and add a Hornady Seating die
                                Thanks for the help

                                Comment

                                Working...
                                UA-8071174-1