Unconfigured Ad Widget

Collapse

Boolits......really?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #91
    Cowboy T
    Calguns Addict
    • Mar 2010
    • 5725

    Here are a few examples of "boolits", all cast by me with their corresponding moulds (Lee 6-cavity models, for boolit-number-type reference).

    First, the 358-105-SWC's. This is a 1-gallon ice cream pail that's full of boolits. I estimate there are about 5,000 in there. These get used in my "powder-puff" .38 Special load.



    Next, the 430-200-RF's. These are used primarily in my .44 Special load, but also in a full-power .44 Magnum load that is meant for the levergun, where I'm going for a bit more velocity. There are about 1,500 in this Folgers coffee container.



    And the TL430-240-SWC's. These are used in my "factory-like" .44 Magnum load. There are about 1,200 boolits in this container.



    And here's the whole lot of 'em! Side view and top view.



    Boolits are great. They also help make rounds like .44 Special and .45 Colt both more available and more affordable. And...well, 's'fun!
    Last edited by Cowboy T; 08-25-2014, 2:53 PM.
    "San Francisco Liberal With A Gun"
    F***ing with people's heads, one gun show at a time. Hallelujah!
    http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
    http://www.liberalsguncorner.com (podcast)
    http://www.youtube.com/sfliberal (YouTube channel)
    ----------------------------------------------------
    To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.

    Comment

    • #92
      CGT80
      Veteran Member
      • Jul 2008
      • 2981

      Originally posted by Cowboy T
      Here are a few examples of "boolits", all cast by me with their corresponding moulds (Lee 6-cavity models, for boolit-number-type reference).

      First, the 358-105-SWC's. This is a 1-gallon ice cream pail that's full of boolits. I estimate there are about 5,000 in there. These get used in my "powder-puff" .38 Special load.



      Next, the 430-200-RF's. These are used primarily in my .44 Special load, but also in a full-power .44 Magnum load that is meant for the levergun, where I'm going for a bit more velocity. There are about 1,500 in this Folgers coffee container.



      And the TL430-240-SWC's. These are used in my "factory-like" .44 Magnum load. There are about 1,200 boolits in this container.



      And here's the whole lot of 'em! Side view and top view.



      Boolits are great. They also help make rounds like .44 Special and .45 Colt both more available and more affordable. And...well, 's'fun!
      You are getting me a little excited with those nude photos. Ohhh the possibilities. What will they wear underneith that golden brass? Liquid alox, 45/45/10, White label Cred, powder coat? After looking at that quantitiy, my alloy might be up to about a 25 on the brinell hardness scale. Do you always let your cans go topless?

      I do not know the history of the term "boolit" but I do know that there is a forum by the name of Castboolits, and the term is universally known in our little group. It is a bit like referring to Calgunners. We could say target shooters or calguns forum members, but people know who Calgunners are. Boolits sounds like bullets, but on a forum that relies on text, we know that boolits are not jwords, or mass produced cast lead projectiles. To us, bullets are not usually hand cast by an individual.

      Boolits are often a higher quality with better lubes and they tend to have a hardness that is better matched to what it will be used for. Lead bullets usually are made of very hard lead that is sized too small for many guns, and coated in lube that better resembles plastic that will never leave a good film in the barrel.

      Just in case anyone asks, I have no idea where the line is where a boolit becomes a bullet. Some boolit casters build their own automated machines, but I suppose they are still more likely to make a high quality product versus one that is just cheap and will hold up well to shipping across the country, such as the commercial uber hard cast bullets that leave streaks of precious metal in my bores.

      We could be talking about a really stupid term, like the "selfie."
      He who dies with the most tools/toys wins

      Comment

      • #93
        BangStick MKII
        Junior Member
        • Jun 2008
        • 41

        clip vs magazine?

        Comment

        • #94
          CGT80
          Veteran Member
          • Jul 2008
          • 2981

          Originally posted by BangStick MKII
          clip vs magazine?
          Nope.

          My Semi auto pistols and rifles will not work if you try to stuff a clip in them. I don't have a M1 Garand either. Neither stripper clips nor enbloc clips would work in my guns. The magazines for my guns would be useless in the Garand and they don't work well to load other magazines.

          A clip and a magazine are two very different items. It is kind of like a tire vs. a wheel. You can say you removed either one to do a brake job on your truck, but we know they are generally stuck together and one will not take the place of the other. Most, not all, of the gun industry has the same standard usage for the words clip and magazine. People are just too lazy or uninformed to use the right terms.

          Boolits and bullets do the same job and serve the same purpose. They can be interchanged as long as the right load data is used.

          Maybe we should discus brake shoes vs. brake pads, or my favorite.........rims vs. wheels. I don't understand why all these people buy just the rim and skip the wheels. It seems a rim is useless without the center section that will bolt to the vehicle's hubs. I know tires list rim size, but that doesn't mean the whole piece is a rim. There is a width to the wheels also, such as 10.5 inches, and there is a bolt quantity and pattern as well.

          40 vs. 45?
          He who dies with the most tools/toys wins

          Comment

          • #95
            Bumslie
            CGN/CGSSA Contributor
            CGN Contributor
            • Oct 2011
            • 5358

            Originally posted by CGT80
            Nope.

            My Semi auto pistols and rifles will not work if you try to stuff a clip in them.
            Mine will



            Last edited by Bumslie; 08-26-2014, 10:47 AM.
            NRA Life Member
            WARNING: This post may contain material offensive to those who lack wit, humor, and common sense. Some overly sensitive "men" will be offended.
            Originally posted by ivanimal
            I love you! (some Homo)
            Originally posted by ivanimal
            I am a Gay muslim sometimes.
            Originally posted by Kestryll
            OP you are an uninformed tool.
            Go Broncos!
            Go Kings Go!

            Comment

            • #96
              Cowboy T
              Calguns Addict
              • Mar 2010
              • 5725

              Bumslie, you have just committed a violation of Government Rule #1:

              THOU SHALT NOT CONFUSE THE ISSUE WITH FACTS!!

              Now go shoot some boolits.
              "San Francisco Liberal With A Gun"
              F***ing with people's heads, one gun show at a time. Hallelujah!
              http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
              http://www.liberalsguncorner.com (podcast)
              http://www.youtube.com/sfliberal (YouTube channel)
              ----------------------------------------------------
              To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.

              Comment

              • #97
                Kaisa
                Junior Member
                • Mar 2011
                • 40

                Originally posted by johnny1290
                Yeah, it used to annoy me too until I started casting myself

                It's a lot faster than explaining everytime what it is.
                ...except it needs a whole thread to explain what it is. Not exactly fast.

                As with previous posters I've never heard as a complete round being referred to as a bullet or boolit (except through ignorance) nor is either term correct to refer to a round of ammunition. This to me conjures up the same thoughts as when you see a graphic online of a complete round flying through the air as if the whole thing is fired through a barrel.

                To me, for the word to be complete it needs a 'z' and I suggest it should now be named boolitz. The z would illustrate exactly what type of word this was. A made up one that doesn't appear in the English language.
                Last edited by Kaisa; 08-29-2014, 11:13 PM.

                Comment

                • #98
                  thenodnarb
                  Veteran Member
                  • May 2009
                  • 2603

                  All words in the English language are made up. English is a made up language. There is no authority that decides what is a word and what isn't. Your English teachers are wrong. There is also no such thing as correct spelling either. Language is simply a means to an end. A way to convey an idea to someone else. If it accomplishes this, it succeeds, if not then it fails.
                  What else shall we call the self made bullet? A "cast bullet" tells the story well, but some feel the need to distinguish between mass produced bullets which are universally undersized for a caliber, and self-made bullets which are custom made and sized for a particular rifle, pistol or revolver. A great deal of effort and knowledge went into making a boolit. The particular gun was likely chamber cast and slugged to determine its actual land and groove diameter as well as the maximum size the boolit could be in order to chamber. The boolit was cast of a carefully mixed alloy of lead.The boolit was tested for a particular hardness and those not meeting that standard were recast with the proper alloying metal. The hardness of the boolit was tailored for a particular purpose, being either harder or softer to achieve certain terminal effects and accuracy goals. A boolit is lubricated with a special coating to prevent leading depending on the speed it travels down the barrel or length of the barrel.
                  So much effort and care goes into a boolit that those who create such projectiles felt the need to use a distinguishing term that carries a special meaning behind it. Only the uninitiated use the term improperly or scoff at the perceived ignorance its use. In reality, they are the ignorant ones.

                  How I Powder Coat Pistol Bullets
                  How I Powder Coat Rifle Bullets

                  Comment

                  • #99
                    Kaisa
                    Junior Member
                    • Mar 2011
                    • 40

                    Originally posted by thenodnarb
                    All words in the English language are made up. English is a made up language. There is no authority that decides what is a word and what isn't. Your English teachers are wrong. There is also no such thing as correct spelling either. Language is simply a means to an end. A way to convey an idea to someone else. If it accomplishes this, it succeeds, if not then it fails.
                    What else shall we call the self made bullet? A "cast bullet" tells the story well, but some feel the need to distinguish between mass produced bullets which are universally undersized for a caliber, and self-made bullets which are custom made and sized for a particular rifle, pistol or revolver. A great deal of effort and knowledge went into making a boolit. The particular gun was likely chamber cast and slugged to determine its actual land and groove diameter as well as the maximum size the boolit could be in order to chamber. The boolit was cast of a carefully mixed alloy of lead.The boolit was tested for a particular hardness and those not meeting that standard were recast with the proper alloying metal. The hardness of the boolit was tailored for a particular purpose, being either harder or softer to achieve certain terminal effects and accuracy goals. A boolit is lubricated with a special coating to prevent leading depending on the speed it travels down the barrel or length of the barrel.
                    So much effort and care goes into a boolit that those who create such projectiles felt the need to use a distinguishing term that carries a special meaning behind it. Only the uninitiated use the term improperly or scoff at the perceived ignorance its use. In reality, they are the ignorant ones.
                    So by that definition if I make a table, a car or anything else it should given a different name - because 'I' made it with care and precision? Your definition of 'boolit' is the same as that of a cast bullet.

                    Yes, all the words in English are made up or derivatives of other words made up in other made up languages. What all those made up words share in common are that they feature in the dictionary with is considered an authoritative source of such words. I look forward to the new revision that features 'boolit'.

                    Comment

                    Working...
                    UA-8071174-1