Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Testing methodology for your loads
Collapse
X
-
Tags: None
-
Don't bother testing in .1gr increments, for a few reasons. First, you'll go mad trying to meter those powders to exact weights, second, you won't see much, if any, difference in that mall of a charge difference, third, because your scale is most likely only accurate to +/- .1gr. What I do in start at min load and work up in .2 grain increments either to, or. 1 below max charge listed. I load 10 rounds of each and go to the range.
I shoot them at 15 yards off hand at the smallest target I can clearly make out and aim at reliably. Tightest 10 shots is the winner.
As for that charge weight, now you have a +/-.1 gr tolerance on measuring your charges, and being as I'm using unique in .40sw right now, that's plus -
Its either going to work or its not !Load it and shoot!Keep it simple!Comment
-
Pistol ammo is far less sensitive than necked rifle cases that needs more optimization. Start with 3 (or 4) high, medium, and low. Shoot a mag at each load and see what works best and refine from there. It's good to find a heavy load and a light load you like. The light load is good for faster follow up. The heavy load is better if you are shooting further.Comment
-
If I'm working up a new load then I chrono first to make sure I'm meeting pf. Then accuracy test. If I like the accuracy I then run 2-300 under conditions I'll encounter at a match to ensure feeding reliability. This process has always worked for me.Comment
-
On the right path, but perhaps a bit anal. Spread the ladder a bit to say .2 gr on the faster powder and .3 on the slower powder. Shoot for say 5 to 6 convenient breaks between min and max.
What's your goal? If just shooting informal paper I like the lightest accurate load that cycles the gun reliably. If shooting for defense, I want the hottest that gives me reasonable accuracy. Nice if they print about the same place at say 15 yards.
Chronos are nice, but unless you have a requirement like power factor, they'll often just confirm the repeatability you saw on the range.
FWIW, I think PB is on the way out. Unless I had a qty I prolly wouldn't be developing loads for it.Palestine is a fake country
No Mas Hamas
#BlackolivesmatterComment
-
I usually load them in a gun and pull the trigger.
Oh, do not, I repeat, do not do this in your garage. Wait until you get to a range.NRA Life Member since 1990
They're not liberals, they're leftists. Please don't use the former for the latter. Liberals are Locke, Jefferson, Burke, Hayek. Leftists are progressives, Prussian state-socialists, fascists. Liberals stand against the state and unequivocally support liberty. Leftists support state tyranny.

Comment
-
I usually just load the middle of the powder charge range. For my .45, I'm using 200gr plated flat points, Hodgdon says 4.4-5.6 gr of HP-38. I load 5.1, just in case some throws are light, I still want them over 5gr.
With slow fire, I can make one big hole at the distances I usually shoot. I have never felt the need to test loads beyond that.Comment
-
I like to load low-middle range for published data. If they all go bang and are somewhat accurate at the distances I like to shoot (7-10yards), then I'm happy. I don't chrono or anything like that so as long as the rounds cycle and go where I want, I'm good.
Maybe this will change as I get more and more experienced with reloading, as those who know what a good wine is vs a boxed wine (which I don't)
.
Comment
-
Really over thinking it if your looking at hand gun loads.
Look up the loads for the powder and bullets that you can get your hands on. Start at the min starting value and shoot about 10-20 rounds and see if it cycles the action on a semi-auto.
According to Hodgdon's, a 9mm shooting 115 gr RN with W231 has a starting load of 4.3 gr producing a velocity of 1075 fps at the muzzle, and a max of 5.1 gr producing 1160 fps. That's a total spread of 85 fps over the 0.8 grs or about 10 fps per 0.1 of a grain.
At those velocities, a 9mm RN will have a difference of only 1.7" of drop between the starting load and the max load at 100 yds. Your handgun is mostly going to be shot at less the 25 yds most likely the majority of the time . At that range the drop will probably be non-existent, so I'm not sure what help your going to get from a chronograph. A standard deviation of 50 fps won't be noticeable at those distances.
Load up 10 rounds of all the weights from start to max, and shoot 5 shoot groups at a range you are comfortably sure you can be consistent (10-15yds). Find the most consistent groupings between where you handguns cycles reliably and the max load.
Unless your really proficient, you'll probably have 3 or more that are close enough as to make it difficult to pick one as the best.Comment
-
Tag great info..
Can anyone touch on what signs to look at in your gun or cases to tell what your best load is... ie how primers are punched, how /where cases fly out..Comment
-
Reloading at the range
A lot of the precision long gun shooters do this. They reload out at the range. With long guns ... heck any rifle, too many rounds down range will affect the accuracy of your rifle. When 0.05" groups are what makes the difference between 1st place and not 1st place ... then you need to absolutely get really efficient with finding that load with the fewest shots expended!
Here is a very nice tutorial on Reloading out at the Range
Now ... at the very least ... you will need a chronograph.Comment
-
Great feed back, thanks for the helpful advice. A chrono would be a waste for me. However, I'm surprised that most shooters here test WITHOUT a rest. By using a sand bag or rest to cancel out the inherent unsteadiness of shooting by hands, wouldn't that make it easier to see which loads where tighter or loose?
Testing loads from 7 - 15 yards would be fine. However, I'm trying to increase my accuracy by working at 25 yards. If you watch the pro shooters on youtube, they practice at 25 yards +. So obviously really light loads would be bad at over 25 yards. Heck, when I go out to the desert with friends we all try to shoot long distance with a pistol. Really hard usually but when you hit some steel it makes the trip.
After reading this thread I have started to make up some ladder loads to try out for my 9mm. I'm hoping latter this week to do some testing too.Comment
-
When I started reloading 30+ years ago the clerk at Fowlers was a long time reloader. So I would say target load 38 Special with 148 grain HBWC and the answer was 2.8 grains of Bullseye. No reason to reinvent the wheel.
9mm 115 grain jacketed bullet 6.0 grains of Unique.
Comment
Calguns.net Statistics
Collapse
Topics: 1,870,676
Posts: 25,174,866
Members: 358,862
Active Members: 5,389
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 19712 users online. 42 members and 19670 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment