Reloading for the 92fs..

[area51]

Can anyone recommend a good powder for the 92fs ? Planning to load 124rn plated.

I've used 5.0 Unique with great results in my other 9s as well as 5.00 grains of wsf and 4.5 - 4.7 grains of 231..

[Cheezle56]

5.4 gr WSF W/124gr FMJ

[J-cat]

125gr lead TC FP .358" revolver bullet, 3.7-4.1grs of Bullseye, 1.050" OAL shot .75" groups at 15 yards from my M9's when I had them.

[pterrell]

Tagged for later.

Sent from my DROID RAZR HD using Tapatalk

[area51]

125gr lead TC FP .358" revolver bullet, 3.7-4.1grs of Bullseye, 1.050" OAL shot .75" groups at 15 yards from my M9's when I had them.

Impressive... 1.050 ? lowest I loaded for was 1.072 wth 124 fp xtremes.. for my Walther..

[J-cat]

Yeah, they are touching the rifling at that OAL. The case mouth is right in the middle of the crimp groove, but don't crimp into it, just remove the flare. I tried Bear Creek, Laser Cast, and a couple off brands and they all shoot the same with zero leading!

[Intimid8tor]

5.1gr Unique. 1.15oal

[Cheep]

5.5grn AA#5, 124grn plated bullet @ 1.100"