Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
which reloading bench
Collapse
X
-
I built my stand out of scrap from a garage cupboard that I pulled out of my new (pre-owned) house. It's not pretty but it was almost free. A handful of wood screws and an old can of stain. I need a better long term solution for mounting the press but it's sturdy for now. I wanted something sturdy but portable enough to move into my office.
Comment
-
I use the Lee press stand and it works as advertised. I have 2 presses on it, one mounted and one in the holder on the shelf, and I mounted my powder measure and my trimmer on wood blocks. With the concrete block in place underneath it is pretty solid; it moves some if a case gets a little sticky during sizing on upstroke but nothing that would upset the apple cart. There's no storage space on it other than the slots on the little shelf to hold other things that are mounted; it's really not useful for putting your components on it. It is what I needed - a relatively portable stand that I could move to where I am going to load in the house...sometimes I use the dining table, sometimes the coffee table, and the stand sits alongside.
That said, if I had the space to get a full sized workbench for reloading, I would do that instead. Having storage, a larger workspace and a spot for all of my equipment so that it doesn't need to be swapped out would be preferable.Originally posted by CSACANNONEERKeep in mind that you don't have a clue.Comment
-
I'll look at some thrift stores tomorrow or a solid wood bench and then I'll check some yard sales this weekend. I'll probably go with the harbor freight one if I don't find a good second hand bench. It looks like everyone likes the harbor freight bench. The display model was probably just put together quickly and not fully tightenedComment
-
I was contemplating the Lee stand, but then I ran across this bench, Stack-On WB-382: http://www.amazon.com/Stack-On-WB-38...eywords=wb+382
I got it from Cabela's for 129 + 18 shipping. It wobbles a bit, so I have a bunch of stuff on the shelves. I like it, lots of space and 2 shelves.Comment
-
I got the home depot one, if I knew HF had one, I'd buy that.
Sent from my DROID RAZR using TapatalkOriginally posted by Kestryll..you're kind of a sad excuse for an attorney...Originally posted by Libertarian777...Don't pick either side....Comment
-
Last edited by Stkx66; 06-13-2014, 8:29 AM.Comment
-
I picked this up yesterday i like it very much. I will post pictures when i am done setting it up
http://www.samsclub.com/sams/ultra-h....ip?navAction=
I bought one of these benches, stained and enclosed it with decent plywood and installed shelves and doors.Comment
-
If you have the space for it, the HF workbench will be MUCH, MUCH more useful than the Lee stand, the grinder stand, or any of the other small stands listed in this thread.
The HF stand has drawers and a large bottom storage shelf. And it has a thick wood top that can be used for other things besides reloading, like servicing your firearms.
I wouldn't worry too much about it feeling flimsy (probably loosely assembled for the store display). Besides, solid wood benches are a lot easier to make sturdy than economy stamped sheet metal ones. If you don't anticipate ever disassembling it for moving, then glue all the joints with Loctite PL Premium Polyurethane Construction Adhesive before assembling. The glued joints will be stronger than the wood itself and will eliminate any looseness in the bench. I would drill the legs and add leveling feet to prevent wobbling on an uneven floor and to allow you to level your bench for proper operation of your powder scale.Justice Alex Kozinski, 9th US Circuit Crt of AppealsComment
-
I got this one from Costco last year. $350 and beefy as all heck.
Locking metal cabinets on each side are great to store powder, primers and bullets. Shelf on top is perfect to hold bags of brass.
Comment
-
I made my own using 2x4s and a 4x8 sheet of 1" MDF for the top and a shelf. It's sturdy as hell without having to bolt it to anything. I bought a workbench from Home Depot for $70 but it looked like crap and it was too big (6' long). It's sturdy but I felt I can make a better one so I photocopied the manual, returned the bench, and made my own 5' version. Cost me under $100. When I have the chance, I will unmount my presses and stain it.Comment
-
Great advice on the leveling feet and adhesive, I'll definitely be doing this. Thanks!If you have the space for it, the HF workbench will be MUCH, MUCH more useful than the Lee stand, the grinder stand, or any of the other small stands listed in this thread.
The HF stand has drawers and a large bottom storage shelf. And it has a thick wood top that can be used for other things besides reloading, like servicing your firearms.
I wouldn't worry too much about it feeling flimsy (probably loosely assembled for the store display). Besides, solid wood benches are a lot easier to make sturdy than economy stamped sheet metal ones. If you don't anticipate ever disassembling it for moving, then glue all the joints with Loctite PL Premium Polyurethane Construction Adhesive before assembling. The glued joints will be stronger than the wood itself and will eliminate any looseness in the bench. I would drill the legs and add leveling feet to prevent wobbling on an uneven floor and to allow you to level your bench for proper operation of your powder scale.Comment
-
Another workbench tip I got from an old woodworking magazine was to put sand inside of the bottom shelf (layer a piece of plywood under a 2x4 lower shelf, fill with sand, then put piece of wood on top to keep it all in. I did it on an old small work table I had made, and it really helped stabilize the table.Working on my first AK, a Yugo M70B1.
Let me know if you need any cylinders hydro-tested or small oxygen cylinders filled in the south LA and north OC area. I also may be able to give calgunners discounts on certain victor products.
Comment
Calguns.net Statistics
Collapse
Topics: 1,870,845
Posts: 25,176,586
Members: 358,862
Active Members: 5,398
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 30463 users online. 39 members and 30424 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment