Unconfigured Ad Widget

Collapse

Nickel plated

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dexstoy
    Junior Member
    • Oct 2013
    • 38

    Nickel plated

    These have a brass core, so can these be safely reloaded?

  • #2
    hermosabeach
    I need a LIFE!!
    • Feb 2009
    • 19288

    Yes
    Rule 1- ALL GUNS ARE ALWAYS LOADED

    Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs)

    Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET

    Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT
    (thanks to Jeff Cooper)

    Comment

    • #3
      bruce381
      Senior Member
      • Feb 2009
      • 2450

      yes OK, sometimes I seperate the nickel for Special loads to make easy to see what they are like different powder or wt bullets.

      Over a liong time the nickel ones to me seem to split earler but i still give it no mind.

      Comment

      • #4
        mif_slim
        I need a LIFE!!
        • Apr 2008
        • 10089

        I use nickel to tell the difference between my brass and the other shooters brass at my old USPSA club..they all shot brass so nickel was easy for ID.
        Originally posted by Gottmituns
        It's not protecting the rights of the 1%, it's IMPOSING new laws because of the 1%.

        Comment

        • #5
          Droppin Deuces
          Calguns Addict
          • Jan 2010
          • 5969

          I use nickel in my target gun to make it easier to sort from my blaster brass and stuff other people toss in my bag. To further differentiate, I only use CCI primers so I can more quickly tell the difference between my own multi fired casings and donated ones.

          I find that nickel plated seems to get maybe 4 firings as opposed to the typical 5-6 of brass.
          sigpic

          Comment

          • #6
            RR.44
            CGSSA Leader
            • Mar 2012
            • 1933

            I must agree with the last 2 pposts, in my experience the nickel plated cases have always split on me quite rapidly ~ 3-4 reloads tops, I tend to avoid them now.
            sigpic

            Comment

            • #7
              UnknownShooter
              Member
              • Mar 2013
              • 335

              separate the nickel cases when tumbling - they don't need nearly as long in the tumbler to look great & you can wear through the nickel if you leave them tumbling for too long..

              Comment

              • #8
                'ol shooter
                Veteran Member
                • Mar 2011
                • 4646

                Originally posted by UnknownShooter
                separate the nickel cases when tumbling - they don't need nearly as long in the tumbler to look great & you can wear through the nickel if you leave them tumbling for too long..
                That, plus when the cases are plated, they are more brittle compared to brass, and they will crack the necks sooner than the brass. I save them for defense loads that will sit in the gun for longer periods, that's why they are plated in the first place.
                sigpic
                Bob B.
                (\__/)
                (='.'=)
                (")_(")

                Comment

                • #9
                  Dutch Henry
                  Senior Member
                  • Feb 2012
                  • 733

                  +1 for nickel cases having a short reloading life. I still reload them but prefer brass.

                  Many years ago, it was explained to me that nickeled cases were preferred by law enforcement because of the cases coming in contact with chrome tanned leather belts and accouterments which were popular until the early 1990s. Brass caused verdigris to form but nickel seemed to withstand long storage in belt loops and ammo pouches.

                  This may be hearsay but it always made sense to me.

                  Comment

                  Working...
                  UA-8071174-1