Unconfigured Ad Widget

Collapse

stainless steel?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rbahri5206
    Junior Member
    • Nov 2011
    • 504

    stainless steel?

    If I got this http://www.harborfreight.com/dual-dr...ler-67632.html

    how many pounds of stainless media would i need, and how many cases can i tumble lets say .223?
  • #2
    damndave
    I need a LIFE!!
    • Oct 2008
    • 10858

    I don't use one of these, but I know some people here do. Places generally only sell pins in 5# bags, so with that said, I would seriously consider investing in the Frankford Arsenal setup for about $200. It's about 10x the capacity and has everything needed to get going including pins.

    But to answer your question the best I know...Since it has a 2-3# capacity (I assume in each drum?), I would do 1.5# brass and 1.5# pins at most. That's about 125x 223 cases.

    Comment

    • #3
      ElDub1950
      Calguns Addict
      • Aug 2012
      • 5688

      Seems like most people go for this dual drum version. I'm curious why the larger, single drum version isn't better.

      Comment

      • #4
        reckoner
        Senior Member
        • Jan 2011
        • 721

        Originally posted by rbahri5206
        If I got this http://www.harborfreight.com/dual-dr...ler-67632.html

        how many pounds of stainless media would i need, and how many cases can i tumble lets say .223?
        I use this tumbler.

        In each drum, I use 1# of media, 1# of brass, and just enough water to cover everything (plus Dawn and Lemishine). I use a cheap food scale to weigh out the brass.

        With both drums, I can clean 250 9mm cases or 150 .223 cases at a time. There's a sticky here listing how many deprimed cases there are in a pound.

        You can find 2# packs of SS media for sale online.
        Last edited by reckoner; 05-06-2014, 1:04 PM.

        Comment

        • #5
          reckoner
          Senior Member
          • Jan 2011
          • 721

          Originally posted by ElDub1950
          Seems like most people go for this dual drum version. I'm curious why the larger, single drum version isn't better.
          http://www.harborfreight.com/3-lb-ro...ler-67631.html
          That single drum is not larger. Each drum on the dual tumbler is the same size/capacity as the single drum.

          Comment

          • #6
            ElDub1950
            Calguns Addict
            • Aug 2012
            • 5688

            Originally posted by reckoner
            That single drum is not larger. Each drum on the dual tumbler is the same size/capacity as the single drum.
            DUH .. not sure how I read that so wrong

            Comment

            • #7
              firebert
              Senior Member
              • Nov 2011
              • 1349

              My recipe is one lb pins, one lb brass, one lb water in each drum and tumble for 1.5 to 2hrs.

              I recently built a single drum to make media separating more convenient. I have heard of people loading it up to over double its 6lb capacity. I'll see how it works out. If I were to break it, it wont be a big lost because I had mines over a year and put it through it's paces.
              03FFL - NRA Life Member - GOA Member

              Comment

              • #8
                rbahri5206
                Junior Member
                • Nov 2011
                • 504

                I ended up ordering 5lbs just in case i get a larger tumbler in the future

                Comment

                • #9
                  bubbala
                  Senior Member
                  • Mar 2012
                  • 904

                  i've been using DISTILLED water and a few grains of laundry powder.
                  really hard water in santa clarita
                  NRA Range Safety Officer pistol and reloading instructor

                  https://www.facebook.com/pages/HL-Se...=photos_stream

                  Comment

                  • #10
                    bearingar15
                    Junior Member
                    • Feb 2013
                    • 85

                    If you get the HF tumbler, make sure you oil the bearings and adjust the belt tension. It will last longer and tumble more efficiently. I also turn it on for a minute to let it warm up before putting filled containers on it.

                    Comment

                    • #11
                      rbahri5206
                      Junior Member
                      • Nov 2011
                      • 504

                      Originally posted by bearingar15
                      If you get the HF tumbler, make sure you oil the bearings and adjust the belt tension. It will last longer and tumble more efficiently. I also turn it on for a minute to let it warm up before putting filled containers on it.
                      How do you adjust it? Tighter or looser?

                      Comment

                      • #12
                        sdkevin
                        Senior Member
                        • Jan 2013
                        • 2248

                        3lbs for $45 or 6lbs for $55.. ?

                        I would compare motor specs between the machines first.
                        After watching WTC Bldg #7 being razed, and considering it's main occupants..

                        I stumbled onto this note while checking advanced weapons..
                        "911 = false flag. WTC 7 was brought down by demolition. 47 floors came down in 6 1/2 seconds - not hit by a plane. Just one of hundreds of absurdities that occurred that day. Wake up".

                        Comment

                        • #13
                          firebert
                          Senior Member
                          • Nov 2011
                          • 1349

                          I wouldn't be surprised if it was the same motor with just a larger platform for a second drum.
                          03FFL - NRA Life Member - GOA Member

                          Comment

                          Working...
                          UA-8071174-1