Unconfigured Ad Widget

Collapse

.308 winchester load data

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 264Grendel
    Member
    • Aug 2009
    • 252

    .308 winchester load data

    I'm trying to find a good load for Remington R25 (friends rifle). I loaded ammo for my ar-10 style rifle but it uses a midlength gas system and I've had no issues. The R25 has a rifle length gas system with a 20" barrel. We've shot factory rounds out of it with no problem. When shooting my handloads, we were getting short stroking with the bolt failing to pick up the next round. We also got a couple of stove pipes. Powder used was TAC with highest load at 1 grain below max using a 168 gr hpbt. I'm guessing the powder is burning to fast for a rifle length gas system. I was thinking of using Winchester 748 which has a medium burn rate. Experienced reloaders what are your suggestions? Am I on the right path using a medium burn rate powder? Only problem is I only have about a half pound of 748 left. Don't want to waste powder. Plan is to eventually load some Barnes Tipped TSX 168 grain. Thanks.
  • #2
    highpower790
    Veteran Member
    • Jun 2013
    • 3481

    Try imr 4064,4895,4320,Hogdon Varget.All of these powers are in the med burn rate category plus some others I may be leaving out.Keep in mind that most stick powders are more tolerant to temperature changes,with Varget (my opinion)being better than those mentioned.
    Keep it simple!

    Comment

    • #3
      264Grendel
      Member
      • Aug 2009
      • 252

      thanks highpower. I was looking into 4064 since some places have it in stock. The others will be hard to come by.

      Comment

      • #4
        highpower790
        Veteran Member
        • Jun 2013
        • 3481

        Natchez shooters supply has 4064 in stock...I believe,the last time i looked anyway.
        Keep it simple!

        Comment

        • #5
          JMP
          Internet Warrior
          CGN Contributor - Lifetime
          • Feb 2012
          • 17056

          Try this sticky. It has years worth of input on the matter.

          Comment

          • #6
            Don the savage
            Senior Member
            • Aug 2010
            • 2094

            I have an r25. It loves 168s loaded with reloader 15
            I support peace through superior firepower.
            "Para ser libre, un hombre debe tener tres cosas, la tierra, una educacion y un fusil. Siempre un fusil ! (To be free, a man must have three things; land, an education and a rifle. Always a rifle)" -Emiliano Zapata.

            Originally posted by rsrocket1
            Of course they are in free territory where they can pick up ammunition at the local 5 and dime without going through a criminal background check. All we get is legalized pot.

            Comment

            • #7
              264Grendel
              Member
              • Aug 2009
              • 252

              Originally posted by JMP
              Try this sticky. It has years worth of input on the matter.

              http://www.calguns.net/calgunforum/s...ad.php?t=72798
              Thanks for the link. The only problem is the availability of powder.

              Comment

              • #8
                ptmn
                Senior Member
                • Aug 2012
                • 789

                If your R25 is similar to the FN SCAR's gas system, then you might want to try BLC2. I load 42.3gr in Federal Brass, Win LR primers, 2.800" with a Hornady 168gr BTHP match bullet. I get match accuracy out if both gas and bolt guns

                Comment

                • #9
                  Divernhunter
                  Calguns Addict
                  • May 2010
                  • 8753

                  I use 748 and it is a great powder in the 308 and 223.
                  A 30cal will reach out and touch them. A 50cal will kick their butt.
                  NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
                  SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

                  Comment

                  • #10
                    Clever
                    Senior Member
                    • Sep 2009
                    • 591

                    Varget, BL-C2, RE-15, 760
                    There are four questions of value in life... What is sacred? Of what is the spirit made? What is worth living for, and what is worth dying for.

                    Comment

                    • #11
                      Jasonaspears
                      Senior Member
                      • Feb 2011
                      • 1200

                      4064 and Varget are great. I'm trying TAC and X-Terminator now too

                      Comment

                      Working...
                      UA-8071174-1