Unconfigured Ad Widget

Collapse

Reloading Equipment List

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Darryl Licht
    CGN/CGSSA Contributor
    • Dec 2012
    • 2259

    Reloading Equipment List

    Hi all!

    I am surprised that there is no sticky or thread on reloading equipment. A search here on the same, brings up hundreds of for sale items. I am grabbing all the equipment I need now to start reloading this summer. My bro in AZ hasn't used his 550 in over 12 years so he's giving it to me.

    So I know I need a press, the proper dies (carbide), primers, powder, brass cases, and other items to measure and weigh powder, measure cases and for case cleaning. I've already got a sturdy bench that should be suitable for reloading.

    Here's where I need your expert advice...

    Scales or measuring "spoons", or both? Why?

    In respect to a scale; electronic or balance? Why?

    Dial Calipers or electronic? Why? (I have a very old dial caliper that was my fathers, I will probably just use... but I need to learn how to use it properly!)

    For case cleaning I'm set on the wet method!

    Any other comments or suggestions?

    Anything I left out or forgot totally?
    "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one.
    --Thomas Jefferson
    Politics is the art of looking for trouble, finding it everywhere, diagnosing it incorrectly and applying the wrong remedies. --Groucho Marx
  • #2
    damndave
    I need a LIFE!!
    • Oct 2008
    • 10858

    I would start here

    Comment

    • #3
      Topflight80
      Member
      • Mar 2014
      • 330

      Also try youtube buddy

      Comment

      • #4
        Bumslie
        CGN/CGSSA Contributor
        CGN Contributor
        • Oct 2011
        • 5358

        Originally posted by Darryl Licht
        Hi all!

        I am surprised that there is no sticky or thread on reloading equipment. A search here on the same, brings up hundreds of for sale items. I am grabbing all the equipment I need now to start reloading this summer. My bro in AZ hasn't used his 550 in over 12 years so he's giving it to me.

        So I know I need a press, the proper dies (carbide), primers, powder, brass cases, and other items to measure and weigh powder, measure cases and for case cleaning. I've already got a sturdy bench that should be suitable for reloading.

        Here's where I need your expert advice...

        Scales or measuring "spoons", or both? Why?

        In respect to a scale; electronic or balance? Why?

        Dial Calipers or electronic? Why? (I have a very old dial caliper that was my fathers, I will probably just use... but I need to learn how to use it properly!)

        For case cleaning I'm set on the wet method!

        Any other comments or suggestions?

        Anything I left out or forgot totally?
        Even though I'm usually a dick, I'll actually try to help you out instead of making snarky comments.

        I'm assuming you're asking about the lee dippers.
        Get a scale. The dippers could work, but they are not always accurate with some powders. I do use them to help trickle in some powders that do not meter as well, like varget.

        As for scales, I prefer balance beam scales. I like the RCBS 5-0-5 scale. I don't fully trust digital ones. If you want a digital scale, the frank ford arsenal one isn't bad. I would always double check with a balance beam scale though.

        Calipers are to your preference. The $20 harbor fright ones will do just fine. You don't have to go out and spend $300 on a set of starrett calipers.

        Hard to give suggestions when I don't know what cartridges you want to load, or what your intent is for reloading.

        Sierra manual is a good one for load data. Hornady and Lyman has good reading for new reloaders. If you plan on shooting a lot of plated xtreme pistol bullets, they recommend data directly out of the Speer #14 book.

        hope this helps a little.
        NRA Life Member
        WARNING: This post may contain material offensive to those who lack wit, humor, and common sense. Some overly sensitive "men" will be offended.
        Originally posted by ivanimal
        I love you! (some Homo)
        Originally posted by ivanimal
        I am a Gay muslim sometimes.
        Originally posted by Kestryll
        OP you are an uninformed tool.
        Go Broncos!
        Go Kings Go!

        Comment

        • #5
          russt
          Senior Member
          • Feb 2012
          • 1039

          Get a book called ABC'S of Reloading. Read it cover to cover as it is a great and quick read.

          Comment

          • #6
            Sub-Moa
            Member
            • Apr 2009
            • 183

            I agree with Bumslie on the balance beam scale. I have a digital scale but always find myself going back to my 5-0-5. I don't always trust my digital scale but know I can trust my 5-0-5.

            Comment

            • #7
              Oceanbob
              I need a LIFE!!
              • Jun 2010
              • 12721

              Originally posted by Bumslie
              Even though I'm usually a dick, I'll actually try to help you out instead of making snarky comments.

              I'm assuming you're asking about the lee dippers.
              Get a scale. The dippers could work, but they are not always accurate with some powders. I do use them to help trickle in some powders that do not meter as well, like varget.

              As for scales, I prefer balance beam scales. I like the RCBS 5-0-5 scale. I don't fully trust digital ones. If you want a digital scale, the frank ford arsenal one isn't bad. I would always double check with a balance beam scale though.

              Calipers are to your preference. The $20 harbor fright ones will do just fine. You don't have to go out and spend $300 on a set of starrett calipers.

              Hard to give suggestions when I don't know what cartridges you want to load, or what your intent is for reloading.

              Sierra manual is a good one for load data. Hornady and Lyman has good reading for new reloaders. If you plan on shooting a lot of plated xtreme pistol bullets, they recommend data directly out of the Speer #14 book.

              hope this helps a little.

              This^^^^

              Yes, get a collection of Reloading Manuals ...

              The Dillon 550 is a very good machine. If it doesn't have a "strong mount" already, get one. Also the Roller handle is nice, but not as nice as the strong mount. Call Dillon and get on their mailing list for the free monthly catalog.

              Order cases directly from Starlinebrass.com

              You don't need scoops. Scoops are for people that don't have a powder measure or a scale. Balance beam is best.

              When you call Dillon they might upgrade the powder drop for free. They did that for me. Dillon is an incredible company. Buy a spare parts kit (baggy full of oddball parts)

              I prefer the dry method via Dillon vibrating media. No mess and the cases come out shiny and bright.

              Good luck
              May the Bridges I burn light the way.

              Life Is Not About Waiting For The Storm To Pass - Its About Learning To Dance In The Rain.

              Fewer people are killed with all rifles each year (323 in 2011) than with shotguns (356), hammers and clubs (496), and hands and feet (728).

              Comment

              • #8
                Darryl Licht
                CGN/CGSSA Contributor
                • Dec 2012
                • 2259

                Originally posted by Bumslie
                Even though I'm usually a dick, I'll actually try to help you out instead of making snarky comments.

                I'm assuming you're asking about the lee dippers.
                Get a scale. The dippers could work, but they are not always accurate with some powders. I do use them to help trickle in some powders that do not meter as well, like varget.

                As for scales, I prefer balance beam scales. I like the RCBS 5-0-5 scale. I don't fully trust digital ones. If you want a digital scale, the frank ford arsenal one isn't bad. I would always double check with a balance beam scale though.

                Calipers are to your preference. The $20 harbor fright ones will do just fine. You don't have to go out and spend $300 on a set of starrett calipers.

                Hard to give suggestions when I don't know what cartridges you want to load, or what your intent is for reloading.

                Sierra manual is a good one for load data. Hornady and Lyman has good reading for new reloaders. If you plan on shooting a lot of plated xtreme pistol bullets, they recommend data directly out of the Speer #14 book.

                hope this helps a little.
                Nice to meet you Richard! LOL!

                As for my purpose and calibers, I am looking to utilize brass I've been saving for the past 3 or so years and I wish to save money by reloading. I also am a hobby addict! I will start with 9mm and .223 calibers.

                Yes, I will be using Xtreme plated projectiles, so I will look for a Speer #14.

                Yes the Lee dippers are what I was referring too.
                "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one.
                --Thomas Jefferson
                Politics is the art of looking for trouble, finding it everywhere, diagnosing it incorrectly and applying the wrong remedies. --Groucho Marx

                Comment

                • #9
                  Whiterabbit
                  Calguns Addict
                  • Oct 2010
                  • 7602

                  Originally posted by Darryl Licht
                  Hi all!

                  I am surprised that there is no sticky or thread on reloading equipment. A search here on the same, brings up hundreds of for sale items. I am grabbing all the equipment I need now to start reloading this summer. My bro in AZ hasn't used his 550 in over 12 years so he's giving it to me.

                  So I know I need a press, the proper dies (carbide), primers, powder, brass cases, and other items to measure and weigh powder, measure cases and for case cleaning. I've already got a sturdy bench that should be suitable for reloading.

                  Here's where I need your expert advice...

                  Scales or measuring "spoons", or both? Why?

                  In respect to a scale; electronic or balance? Why?

                  Dial Calipers or electronic? Why? (I have a very old dial caliper that was my fathers, I will probably just use... but I need to learn how to use it properly!)

                  For case cleaning I'm set on the wet method!

                  Any other comments or suggestions?

                  Anything I left out or forgot totally?
                  I prefer scales. I wouldn't mind spoons, but I started with a scale, so I like it. It's nice to have a scale anyways with spoons, so you can confirm the weight of the charge and check uniformity too.

                  I like electronic scales for speed. I'd punch a wall waiting for the balance scale to settle for every charge weigh.

                  I personally PREFER neither dial nor electronic calipers, but vernier. Again, it's because of my upbringing and what I am used to (plus it lets me be a snob). However, I don't have a vernier that goes past 3 inches, so I end up using a dial. I'd use either (dial or electronic) and not care much which. We don't need precision here for 99% of reloading. And the few few few times I do need precision, I have a starret 0-1" vernier micrometer that does the job.

                  No other comments, you seem well on your way and have your family in AZ to help you too. I'm sure you'll manage just fine.

                  Comment

                  • #10
                    opos
                    In Memoriam
                    • Oct 2009
                    • 1597

                    I have used a RCBS 505 scale for years...I hand load smaller quantities than many so I weigh every load...I don't use a powder measure...I have a set of the Lee dippers and when loading I find the one that throws just a little less than my target weight into the scale pan..then use an RCBS trickler to top off the charge in the pan while verifying my weight. I don't like the electronic scale (have one and seldom use it except to get approx finished weights to help check for a double charge if I'm concerned)..The electronic seems to fluctuate if near neon lights (all my shop lights are neon) and it just isn't something I trust...never had any issue with my beam scale. I have a set of check weights and verify my beam scale before each loading session..just takes a second when zeroing...zeroing is a must and be careful of wind gusts if loading in a garage or near a fan..it can cause an issue.

                    Read the manuals and then re read..be leery of the internet commando's that freely publish loads on the web..always verify...If you see a load that calls for 1/4 # of C-4 compressed under a 300 grain vinyl projectile in a .25 auto..be sure to check that out...man there have been some really dangerous things passed along..don't know why folks do that...have fun and load safe.
                    Last edited by opos; 03-21-2014, 9:35 AM.
                    God and the Constitution give me my rights and actions...any other input is just blabbering.

                    Comment

                    • #11
                      Citadelgrad87
                      I need a LIFE!!
                      • Mar 2007
                      • 17001

                      I'm not exactly new to reloading but I left it for a while and will weigh in.

                      I'm not a snob, but in some areas you really need to do your homework and buy something better that might cost a bit more, but is well suited to the task. I'm still figuring out what those things are.

                      I really think dies are a personal preference item.

                      I'd get a stuck case remover with my first set of dies, if you have one set of dies and jam a case, you're done. I think they are about $20.

                      Get a good scale. A good beam scale is way better than a cheap digital scale, at least to me. I started with a lee perfect measure, but I found the tray swinging and waiting for it to stop really slowed me down.

                      I upgraded to a Lyman electronic dispenser and scale combo. It's well made, and it will dispense an accurate thrown, and simultaneously measure that throw. It's a bit slow, but for checking throws of my press dispenser, it gives quick readings but I calibrate it every time. I really love this piece of equipment. I vastly prefer it over the lee, but I haven't tried other beam scales.

                      Get a kinetic bullet puller. I use mine all the time.

                      I got a cheap lee hand primer, and I love it. It gives me a feel for seating, I reload a lot of brass that needs decrimp into and until I'm sure it it properly sorted out, I don't want to prime using my press.
                      Last edited by Citadelgrad87; 03-21-2014, 12:25 PM.
                      Originally posted by tony270
                      It's easy to be a keyboard warrior, you would melt like wax in front of me, you wouldn't be able to move your lips.
                      Originally posted by repubconserv
                      Print it out and frame it for all I care
                      Originally posted by el chivo
                      I don't need to think at all..
                      Originally posted by pjsig
                      You are talking to someone who already won this lame conversation, not a brick a wall. Too bad you don't realize it.
                      XXXXXXXXXXXXXXXXXXXXXXX
                      sigpic

                      Comment

                      • #12
                        Bumslie
                        CGN/CGSSA Contributor
                        CGN Contributor
                        • Oct 2011
                        • 5358

                        Good call on a stuck case remover and bullet puller.
                        NRA Life Member
                        WARNING: This post may contain material offensive to those who lack wit, humor, and common sense. Some overly sensitive "men" will be offended.
                        Originally posted by ivanimal
                        I love you! (some Homo)
                        Originally posted by ivanimal
                        I am a Gay muslim sometimes.
                        Originally posted by Kestryll
                        OP you are an uninformed tool.
                        Go Broncos!
                        Go Kings Go!

                        Comment

                        • #13
                          Capybara
                          CGSSA Coordinator
                          CGN Contributor
                          • Feb 2012
                          • 15791

                          Also important Darryl, attend one of our reloading clinics. You have no excuses to not get out and meet guys like Bumslie, Stilly and Big Bronco in person and gain the benefit of their considerable knowledge and experience. And you will learn what to buy before whipping out your credit card and making mistakes. Do it.

                          March 30th in L.A.
                          April 6th in Camarillo
                          May 4th in O.C.
                          May 18th North San Diego ( Camp Pendleton)
                          NRA Certified Metallic Cartridge Reloading Instructor, Shotgun Instructor and Range Safety Officer

                          sigpic

                          Comment

                          • #14
                            slopoke
                            Senior Member
                            • Jan 2010
                            • 509

                            I'll just comment on scales. I have an electronic type and use a check weight every now and then to confirm that it's reading accurately. If I throw on a 1/2 grain weight and it reads .5, it's good to go. I have not used my beam scale in a long time.

                            Comment

                            • #15
                              23's Dad
                              Senior Member
                              • Jun 2010
                              • 502

                              You might need 2 different stuck case removers!

                              Originally posted by Citadelgrad87

                              I really think dies are a personal preference item.

                              I'd get a stuck case remover with my first set of dies, if you have one set of dies and jam a case, you're done. I think they are about $20.

                              Get a good scale. A good beam scale is way better than a cheap digital scale, at least to me. I started with a lee perfect measure, but I found the tray swinging and waiting for it to stop really slowed me down.
                              Note that different dies use different stuck case removers. Some work with a tap & die from the case head, and some work through the case mouth. I.E. you can't clear a stuck case in a Hornady Die with a Forster stuck case remover. At least you can't do it without breaking something. Don't ask me how I know.

                              On the subject of a beam scale, I am also more comfortable with a beam scale. I happened to find a nearly new in box Webster beam scale. It's oil dampened, so it settles almost immediately. It's as fast as my cheapy Hornady digital, and not as touchy.

                              I have been really impressed with the quality, customer service, and ease of use with Hornady dies. I prefer their bullet seating system over anything except my Forster Ultra. And I can buy 3 or 4 sets of Hornady dies for the price of an Ultra.

                              Good luck, and read your manuals!

                              Comment

                              Working...
                              UA-8071174-1