Unconfigured Ad Widget

Collapse

Cleaning hopper

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 09cs
    Senior Member
    • Apr 2013
    • 1704

    Cleaning hopper

    I just set up my powder hopper and read to give it a good cleaning to degrease it before putting powder in, but didn't say what to use. I did a quick google search and came up with using stuff like 409 or agent orange, and to stay away from stuff like brake cleaner. So is 409 ok to use?
    LA CCW:
    Mailed app: 6/23/2021
    Received Call: 4/5/22
    Interview: 4/12/22
    More documentation for GC requested and sent: 6/23/22
    Livescan completed and cleared: 8/3/22 Firearm Livescan Completed: 8/7/22
    Proceed to training email: 9/13/22
    Training doc received: 9/28/22
    Call to pick up: 10/31/22
    Pick up permit: 11/4/22
  • #2
    whatwhy
    Senior Member
    • Sep 2013
    • 516

    409 is fine, it wont eat away at plastic (like brake cleaner will). Soapy water is good too.




    you big noob

    The materials and information contained above in this post are for informational purposes only and not for the purpose of providing legal advice. No attorney-client relationship is created by any interaction with the author of such materials and information.

    Comment

    • #3
      Kodemonkey
      • Jun 2010
      • 2904

      Soap and water, rubbing alcohol.

      I rub the inside of mine with a dryer sheet to keep the powder from getting all static clingy and stuff.

      Comment

      • #4
        TKM
        Onward through the fog!
        CGN Contributor
        • Jul 2002
        • 10657

        When it's dry give it a quick wipe with a dryer sheet to kill any static buildup.

        Also freshens the range as you shoot.
        It's not PTSD, it's nostalgia.

        Comment

        • #5
          09cs
          Senior Member
          • Apr 2013
          • 1704

          Originally posted by whatwhy
          409 is fine, it wont eat away at plastic (like brake cleaner will). Soapy water is good too.




          you big noob
          Haha yes I am

          Soapy water, paper towel and dryer sheet it is so I don't need to run to the store hah
          LA CCW:
          Mailed app: 6/23/2021
          Received Call: 4/5/22
          Interview: 4/12/22
          More documentation for GC requested and sent: 6/23/22
          Livescan completed and cleared: 8/3/22 Firearm Livescan Completed: 8/7/22
          Proceed to training email: 9/13/22
          Training doc received: 9/28/22
          Call to pick up: 10/31/22
          Pick up permit: 11/4/22

          Comment

          • #6
            croue
            Senior Member
            • Jan 2013
            • 1257

            Originally posted by Kodemonkey
            Soap and water, rubbing alcohol.

            I rub the inside of mine with a dryer sheet to keep the powder from getting all static clingy and stuff.
            Does that work well? Powder static is the only really annoying thing about emptying the tube and changing powders. Well, that and the slow flow through the funnel if you're dumping a nearly full tube.

            Comment

            • #7
              Bumslie
              CGN/CGSSA Contributor
              CGN Contributor
              • Oct 2011
              • 5358

              Originally posted by croue
              Does that work well? Powder static is the only really annoying thing about emptying the tube and changing powders. Well, that and the slow flow through the funnel if you're dumping a nearly full tube.
              Yep. Works great.
              NRA Life Member
              WARNING: This post may contain material offensive to those who lack wit, humor, and common sense. Some overly sensitive "men" will be offended.
              Originally posted by ivanimal
              I love you! (some Homo)
              Originally posted by ivanimal
              I am a Gay muslim sometimes.
              Originally posted by Kestryll
              OP you are an uninformed tool.
              Go Broncos!
              Go Kings Go!

              Comment

              • #8
                CK_32
                I need a LIFE!!
                • Sep 2010
                • 14369

                Yes clean it!!!


                Take it fully apart, wipe it down with a dry rag, then a wet paper towel then make sure you redry it 100%. Again make sure you get the internals. Then put a dryer sheet in the jar for a night to get the static off of the plastic hopper.


                Then run at least 3 jars full of powder and just dump it back into the container to get jar coated with powder dust to get rid of the friction and static to the plastic.


                Trust me I had a head ache for 2 months when I first started reloading trying to figure out why my new RCBS thrower was throwing +/- 2.0 gr... Almost sold the POS. Glad I talked to some guys first who helped me now I'm +/- .3 to .1 depending on powder. Mine had a lot of grease on the internals and a lot of static on the plastic hopper that was causing it to throw like sh**.
                Last edited by CK_32; 02-15-2014, 4:18 PM.
                For Sale: AR500 Lvl III+ ASC Armor

                What's Your Caliber??


                My Youtube channel

                Comment

                • #9
                  rdfact
                  CGN Contributor
                  • Nov 2012
                  • 2737

                  Noob here who went through the same thing recently. I cleaned my Hornady powder measure with One Shot as recommended by Hornady (of course - it means you buy more of their products). There was quite a bit of static using a fine flake powder. I later cleaned again as other recommended: with soapy water and do not rinse - let dry with soap residue. I used Dawn liquid dish soap. The static was MUCH worse. Maybe too much soap, not enough soap?
                  So I cleaned it again, let it dry, then coated it with graphite powder. Much better now, very little static cling.

                  Comment

                  • #10
                    damndave
                    I need a LIFE!!
                    • Oct 2008
                    • 10858

                    I wipe all the metal parts with solvent and the tube with just soapy water. The tube always gets rubbed down with a old dryer sheet to reduce the static. After all clean and dry, run 1/2 to 1# of powder through it to get the graphite all over it.

                    Comment

                    Working...
                    UA-8071174-1