Unconfigured Ad Widget

Collapse

WTF case trimmer

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • captn-tin
    Senior Member
    • Mar 2008
    • 817

    WTF case trimmer

    Anyone using the Little Crow Gunworks case trimmer?
    Just got mine and it does throw the trimmings out everywhere!
    Solution....cover the 2 holes with duct tape. Trimmings are trapped in tool, and stick to the tape.
    I've trimmed about 50 so far without changeing tape.

    Just changed tape and I could have trimmed at least 50 more without changing tape.
    Trimmer works as advertised. Like it so far.
  • #2
    NiMiK
    Senior Member
    • Jun 2011
    • 501

    I use one of those red party cups with a hole on the bottom that's taped to my drill. The shavings will hit the cup and drop down to the trash bin. Any cylinder big enough to go around the chuck (not on the chuck) will work. Your favorite soda can will work pretty well too.

    Comment

    • #3
      dlouie87
      Senior Member
      • Sep 2008
      • 1537

      Take a plastic soda bottle. Cut the top off like you were trying to make a funnel. Stick the WFT through the mouth of the "funnel" and that will prevent the brass trimmings from flying everywhere.

      Changing the duct tape after every 50 pieces seems like a PITA.
      -D

      Comment

      • #4
        MarkInFolsom
        Member
        • Mar 2011
        • 392

        I run mine in a drill press at 200 rpm. Trimmings just fall on the drill press table.

        Comment

        • #5
          barrage
          Banned
          • Oct 2012
          • 3351

          Got one for 308 and 223. Love 'em!

          Don't love the trimmings flying everywhere so much, but I figure anything that works as well as the WFT's do is probably going to make a mess doing its job.

          Comment

          • #6
            Safra460
            Member
            • Jan 2011
            • 306

            What do you guys use to hold the brass?
            After about 100 rounds the fingers get sore!

            Comment

            • #7
              pdq_wizzard
              Veteran Member
              • May 2008
              • 3813

              Easy and cheap



              Sent from my SAMSUNG-SGH-I337 using Tapatalk
              Q: What was the most positive result of the "Cash for Clunkers" program?
              A: It took 95% of the Obama bumper stickers off the road.

              Originally posted by M. Sage
              More what? More crazy?
              You live in California. There's always more crazy. It's a renewable resource.

              Comment

              • #8
                barrage
                Banned
                • Oct 2012
                • 3351

                Originally posted by wfloo
                What do you guys use to hold the brass?
                After about 100 rounds the fingers get sore!
                I use my fingers, too. When they get sore, I tell them to HTFU.

                Comment

                • #9
                  Reelemup
                  Senior Member
                  • Feb 2013
                  • 1392

                  Last edited by Reelemup; 02-05-2014, 6:16 PM.
                  Fish molester also pick shrooms

                  Comment

                  • #10
                    Broccoli Killer
                    Junior Member
                    • Nov 2011
                    • 63

                    Rubber gloves can help prevent the brass from over turning in your hand.
                    Personally, I've used pliers (with jaws taped over) and the shell holder tool from my Lyman E-Zee trim rifle set. I've done approximately 500-600 cases of 300 BLK using both methods above.

                    Comment

                    • #11
                      bigdawg86
                      Veteran Member
                      • Mar 2012
                      • 3554

                      I just got one that I'm trying to mount to a motor I have... I have noticed so far that the brass length can vary from head stamp to head stamp... I'm making 300 blackout brass right now and kinda bummed by the length variations. I even sized them all first so I dunno

                      Sent from my DROID RAZR using Tapatalk

                      Comment

                      • #12
                        bitethebullet
                        Member
                        • Oct 2012
                        • 187

                        As said above...150-200 rpm and the shavings just fall into the trash....I use a loop of Velcro on the handheld drill trigger to get the right speed....slow and stead makes no mess....300-400 an hour no problem...

                        Comment

                        • #13
                          MarkInFolsom
                          Member
                          • Mar 2011
                          • 392

                          Originally posted by wfloo
                          What do you guys use to hold the brass?
                          After about 100 rounds the fingers get sore!
                          I use a leather glove, specifically a TIG welding goat skin glove. Thin, flexible, tactile and easily grabs the brass.

                          Comment

                          • #14
                            captn-tin
                            Senior Member
                            • Mar 2008
                            • 817

                            Originally posted by dlouie87
                            Take a plastic soda bottle. Cut the top off like you were trying to make a funnel. Stick the WFT through the mouth of the "funnel" and that will prevent the brass trimmings from flying everywhere.

                            Changing the duct tape after every 50 pieces seems like a PITA.
                            took me 12 - 14 seconds to change tape. like i said could have done nuther 50 at least before changing tape.
                            then again i'm retired so 12-15 seconds don't mean much to me. HA

                            Comment

                            • #15
                              NiMiK
                              Senior Member
                              • Jun 2011
                              • 501

                              I'll do about 500 rounds before I start losing feelings on my thumb and index finger. Then I'll get my 6 year old daughter to help me. It helps her focus rather than bounce off the walls doing nothing

                              Comment

                              Working...
                              UA-8071174-1