Unconfigured Ad Widget

Collapse

.300 win mag loading

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bigmike82
    Bit Pusher
    CGN Contributor
    • Jan 2008
    • 3876

    .300 win mag loading

    I was wondering if any of you guys had any good resources for loading .300 win mag? I'm getting the dies and stuff now, but I'd like to know which bullets would perform best, which primers to use and so forth. Any advice is much appreciated.

    Thanks!
    -- 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0
  • #2
    rksimple
    Calguns Addict
    • Jan 2006
    • 6257

    Whats your intended purpose?
    GAP Team Shooter 5

    Comment

    • #3
      bigmike82
      Bit Pusher
      CGN Contributor
      • Jan 2008
      • 3876

      That might help.

      Mainly, target shooting. I'd like to get consistantly accurate performance on my handloads, intially to about 400 yards but eventually moving out to 1000.
      -- 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

      Comment

      • #4
        rksimple
        Calguns Addict
        • Jan 2006
        • 6257

        Some a191 clone loads would be a good starting point. Get some normal winchester brass, your favorite mag primer, and some 190 smks. Play with it all a bit to find what your rifle likes. Have fun with it!
        GAP Team Shooter 5

        Comment

        • #5
          bigmike82
          Bit Pusher
          CGN Contributor
          • Jan 2008
          • 3876

          Good advice.

          Do the regular .30 caliber bullets work?

          - Mike
          -- 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

          Comment

          • #6
            rksimple
            Calguns Addict
            • Jan 2006
            • 6257

            Yep. 30 cal smks will do. They're usually the easiest to load and get to shoot well. Once you get a little experience with the cartridge, you can mix it up with some high BC bergers or the like. They do really well in the magnums. They just need to be loaded a bit differently.
            GAP Team Shooter 5

            Comment

            • #7
              ar15barrels
              I need a LIFE!!
              • Jan 2006
              • 57198

              Regular 30 caliber 190gr SMK's are what you need.
              210 Berger BT's might be good too.
              Randall Rausch

              AR work: www.ar15barrels.com
              Handguns: www.handgunbarrels.com
              Bolt actions: www.700barrels.com
              Foreign Semi Autos: www.akbarrels.com
              Most work done while you wait on a scheduled shop visit.

              Comment

              • #8
                bigmike82
                Bit Pusher
                CGN Contributor
                • Jan 2008
                • 3876

                Awesome. That's what I'll get.

                Thanks gents.

                Any powder recomendations?
                -- 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

                Comment

                • #9
                  ar15barrels
                  I need a LIFE!!
                  • Jan 2006
                  • 57198

                  Originally posted by bigmike82
                  Awesome. That's what I'll get.

                  Thanks gents.

                  Any powder recomendations?
                  Bump this thread tonight and I'll run you a quickload pass...
                  What's your barrel length?
                  Randall Rausch

                  AR work: www.ar15barrels.com
                  Handguns: www.handgunbarrels.com
                  Bolt actions: www.700barrels.com
                  Foreign Semi Autos: www.akbarrels.com
                  Most work done while you wait on a scheduled shop visit.

                  Comment

                  • #10
                    bigmike82
                    Bit Pusher
                    CGN Contributor
                    • Jan 2008
                    • 3876

                    Will do.

                    The barrel length is 26.5.

                    Thanks!
                    -- 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

                    Comment

                    • #11
                      Trapper
                      Senior Member
                      • Dec 2007
                      • 2161

                      I'm loading 71gr of RL22 behind a 190gr SMK in my 700 Sendero
                      When the battle drum beats, it is too late to sharpen your sword."
                      Sir Winston Churchill

                      Comment

                      • #12
                        Fjold
                        I need a LIFE!!
                        • Oct 2005
                        • 23090

                        WHATEVER YOU HUNT Rifle, pistol, shotshell. The list is already here. BUILT FOR THE SEASON Extreme series powders for hunting loads, dawn to dusk. SHOP HODGDON Dialing in your next purchase? Shop the Hodgdon Powder line and find the exact powder your looking for. Shop Now Fraud Alert Multiple sites are now impersonating the Hodgdon […]

                        Click on "Data"
                        Click on "Reloading data center"
                        Click on "I agree"
                        Click on "Cartridge loads"
                        Under "Load type" select "Rifle"
                        Under "Cartridge" select "300 Winchester Magnum"
                        Then click the "Get Data" button
                        Frank

                        One rifle, one planet, Holland's 375




                        Life Member NRA, CRPA and SAF

                        Comment

                        • #13
                          scr83jp
                          Senior Member
                          • Jul 2008
                          • 678

                          300wm ammo loading

                          I have a Sako Finnsport mod 2700 in 300wm that I load ammo for hunting .One of my loads:180gr Sierra GameKing,72gr of IMR 4831,Rem 9 1/2 LR Mag primer using Rem or Win brass.The other loads are with Nosler Bullets in 165gr solid base,180gr accubond & 220gr partition using the Nosler Reloading Manuals data I have the 4th,5th & 6th editions but mostly use the 5th.I've found their most accurate reloading data to be correct for my rifles using the bullet weight and powder listed.For Nosler Bullets I buy BLEMS from www.shootersproshop.com or a new mail order company in Bend Oregon www.bivwak.com Before purchasing any I checked with a nosler tech who told me they all hunt with the blems which have cosmetic defects and I can't tell them from the firsts.I do my reloading with a Dillon RL550B but I use an OHAUS D-U-O Mod 7200 Powder Measure I purchased 37 years ago,no longer made, item was sold to RCBS & they dropped it.
                          Last edited by scr83jp; 07-28-2008, 2:55 PM.

                          Comment

                          • #14
                            bigmike82
                            Bit Pusher
                            CGN Contributor
                            • Jan 2008
                            • 3876

                            Great info. I forgot that hodgon had that data available.

                            I'll have to pick up a Nosler manual as well.

                            Thanks!
                            -- 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

                            Comment

                            • #15
                              ar15barrels
                              I need a LIFE!!
                              • Jan 2006
                              • 57198

                              Lunch break...

                              Code:
                              Cartridge          : .300 Win. Mag.(W)
                              Bullet             : .308, 190, Sierra HP MatchK 2210
                              Cartridge O.A.L. L6: 3.340 inch or 84.84 mm
                              Barrel Length      : 26.5 inch or 673.1 mm
                              
                              Predicted Data for Indicated Charges of the Following Powders.
                              
                              Matching Maximum Pressure: 62000 psi, or 427 MPa
                              
                              or a maximum loading ratio or filling of 105 %
                              
                              These calculations refer to your specified settings in QuickLOAD 'Cartridge Dimensions' window.
                              C A U T I O N : any load listed can result in a powder charge that falls below minimum suggested
                              loads or exceeds maximum suggested loads as presented in current handloading manuals. Understand
                              that all of the listed powders can be unsuitable for the given combination of cartridge, bullet
                              and gun. Actual load order can vary, depending upon lot-to-lot powder and component variations.
                              USE ONLY FOR COMPARISON !
                              
                              97 loads produced a Loading Ratio below user-defined minimum of 80%. These powders have been skipped.
                              
                              Powder type          Filling/Loading Ratio  Charge    Charge   Vel. Prop.Burnt P max  P muzz  B_Time
                                                                    %     Grains    Gramm   fps     %       psi     psi    ms
                              ---------------------------------  -----------------------------------------------------------------
                              Ramshot Magnum (Big Boy)           102.2     83.5     5.41    3122    99.9    62000   14689   1.240  !DANGEROUS LOAD-DO NOT USE!
                              PB Clermont PCL 517                102.5     83.6     5.42    3121    99.9    62000   14678   1.240  !DANGEROUS LOAD-DO NOT USE!
                              Vihtavuori N560                     97.5     77.7     5.04    3117    99.4    62000   14789   1.248  !DANGEROUS LOAD-DO NOT USE!
                              Norma MRP                           98.8     77.9     5.05    3114   100.0    62000   14226   1.255  !DANGEROUS LOAD-DO NOT USE!
                              Accurate MAGPRO                    100.2     81.1     5.25    3111    98.7    62000   15061   1.255  !DANGEROUS LOAD-DO NOT USE!
                              IMR 7828                           102.3     77.2     5.01    3107    99.7    62000   14279   1.237  !DANGEROUS LOAD-DO NOT USE!
                              IMR 7828 SSC                        98.5     77.2     5.01    3107    99.7    62000   14279   1.237  !DANGEROUS LOAD-DO NOT USE!
                              Alliant Reloder-25                 105.0     79.7     5.17    3095   100.0    60644   13700   1.256  ! Near Maximum !
                              ADI AR 2213                         96.9     76.8     4.98    3094    99.6    62000   14171   1.235  !DANGEROUS LOAD-DO NOT USE!
                              ADI AP 2214                        103.4     82.0     5.31    3091    99.8    62000   14124   1.233  !DANGEROUS LOAD-DO NOT USE!
                              Alliant Reloder-22                  99.9     77.1     4.99    3089   100.0    62000   14096   1.254  !DANGEROUS LOAD-DO NOT USE!
                              Raufoss RA15                        99.9     77.1     4.99    3089   100.0    62000   14096   1.254  !DANGEROUS LOAD-DO NOT USE!
                              Hodgdon H1000                      104.5     82.2     5.32    3089    99.8    62000   14087   1.233  !DANGEROUS LOAD-DO NOT USE!
                              Winchester WXR                      98.7     77.5     5.02    3088    99.9    62000   14136   1.255  !DANGEROUS LOAD-DO NOT USE!
                              Hodgdon H4831 SC                    99.5     78.5     5.08    3072    99.5    62000   13944   1.237  !DANGEROUS LOAD-DO NOT USE!
                              Rottweil R905                      100.4     76.7     4.97    3069    99.4    62000   14059   1.254  !DANGEROUS LOAD-DO NOT USE!
                              ADI AR 2209                         93.3     73.2     4.74    3048    99.9    62000   13281   1.243  !DANGEROUS LOAD-DO NOT USE!
                              Alliant Reloder-19                  97.9     74.0     4.79    3045    99.9    62000   13369   1.251  !DANGEROUS LOAD-DO NOT USE!
                              Norma MRP 2                        105.0     80.2     5.20    3036    99.5    56219   14632   1.313  ! Near Maximum !
                              Winchester 760                      87.6     70.5     4.57    3032   100.0    62000   12761   1.259  !DANGEROUS LOAD-DO NOT USE!
                              Ramshot Hunter                      89.6     72.9     4.73    3031   100.0    62000   12771   1.259  !DANGEROUS LOAD-DO NOT USE!
                              Hodgdon Retumbo                    105.0     80.6     5.22    3026   100.0    54830   13686   1.312  ! Near Maximum !
                              Raufoss RA4                         95.0     72.5     4.70    3023    99.9    62000   13012   1.251  !DANGEROUS LOAD-DO NOT USE!
                              Norma 204                           93.0     72.5     4.70    3023    99.9    62000   13012   1.251  !DANGEROUS LOAD-DO NOT USE!
                              Hodgdon H4350                       93.6     72.3     4.68    3021    99.7    62000   13044   1.246  !DANGEROUS LOAD-DO NOT USE!
                              IMR 4350                            91.6     69.2     4.48    3020   100.0    62000   12453   1.254  !DANGEROUS LOAD-DO NOT USE!
                              Vihtavuori N550                     87.6     69.8     4.52    3005   100.0    62000   12298   1.269  !DANGEROUS LOAD-DO NOT USE!
                              Randall Rausch

                              AR work: www.ar15barrels.com
                              Handguns: www.handgunbarrels.com
                              Bolt actions: www.700barrels.com
                              Foreign Semi Autos: www.akbarrels.com
                              Most work done while you wait on a scheduled shop visit.

                              Comment

                              Working...
                              UA-8071174-1