Unconfigured Ad Widget

Collapse

Case trimming over load. Help!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Pauliedad
    CGN/CGSSA Contributor - Lifetime
    CGN Contributor - Lifetime
    • Dec 2012
    • 2095

    Case trimming over load. Help!

    Hey guys,
    So I've been mostly loading pistol and am starting to branch out.
    Already have done .223 and when it came to trimming I picked up a "World's Best Trimmer" in the designated .223.
    I'm starting to get supplies tools together for .308, 30-30, and 30 carbine.
    What would you recommend? I've been looking at YouTube and reading and still not feeling confident in anything.
    World's Best Trimmer has a new generation that has changeable cutters but not for 30 carbine. I could get their .308 and 30-30 but then what's the option for 30. Carbine? At this point I'm not wanting to learn the hard way and end up spending too much for a so so platform.
    Any guidance would be appreciated.
  • #2
    Enfield47
    Calguns Addict
    • Sep 2012
    • 6385

    I use the the Lee case length gauge and cutter for my rifle cases, including 30 carbine. For just a few bucks you can get the cutter, lock stud and case length gauge. Chuck it in a drill and you're in business. Unless you are processing in mass this should work for you. The 30 carbine rounds don't stretch very much so once you trim initially, you can probably get away with not trimming again for 2-3 more firings.

    Comment

    • #3
      milotrain
      Veteran Member
      • Apr 2011
      • 4301

      How much are you going to shoot of each? The LE Wilson will basically trim everything, but you do need case holders for each. It is a great trimmer but it is not fast. I'd use an LE wilson for anything you do rarely, and a WTF for whatever caliber you shoot often.
      weg: That device is obsolete now. They replaced it with wizards.
      frank: Wait a minute. There are more than one wizard? Is [are?] the wizard calibrated?

      Comment

      • #4
        Bumslie
        CGN/CGSSA Contributor
        CGN Contributor
        • Oct 2011
        • 5358

        My vote is for Forster classic trimmer. You can buy a 3-way cutter head so it chamfers and deburs in one step. You can also attatch a power drill if needed.
        NRA Life Member
        WARNING: This post may contain material offensive to those who lack wit, humor, and common sense. Some overly sensitive "men" will be offended.
        Originally posted by ivanimal
        I love you! (some Homo)
        Originally posted by ivanimal
        I am a Gay muslim sometimes.
        Originally posted by Kestryll
        OP you are an uninformed tool.
        Go Broncos!
        Go Kings Go!

        Comment

        • #5
          bohoki
          I need a LIFE!!
          • Jan 2006
          • 20826

          30 carbine is kind of annoying it has no shoulder for trimming so you got to use oal i use the lee cause its cheap but its pin was too thick i had to thin it a bit so it would fit the mouth of my sized brass

          and when my cases aren't spinning free of the shellholder it works fine

          maybe someone could make a dull centered cutter and a little pin that goes throught the flash hole from the bottom to act as a stop

          Comment

          • #6
            Whiterabbit
            Calguns Addict
            • Oct 2010
            • 7602

            you need a lathe type trimmer. It will cover all the obscure stuff. If you shoot thousands of something, then you get the specialty trimmers (from LEE up to Giraud and anywhere between.)

            Comment

            • #7
              Bastard
              • Jul 2009
              • 2209

              I have the overpriced super deluxe Sinclair's trimmer which is essentially a LE Wilson trimmer with all kinds of extras, though none of it necessary it does make it nice when setting up. I can't say enough good about the Wilson trimmers, though the need for caliber specific case holders is a bit annoying.

              Comment

              • #8
                TMangram
                Junior Member
                • Jan 2014
                • 3

                Case Trimmer

                Go with the case trimmer from ACT Tactical. It has interchangeable dies, so you can use one trimmer for pretty much anything under 50 caliber.

                Comment

                • #9
                  Whiterabbit
                  Calguns Addict
                  • Oct 2010
                  • 7602

                  you must be an employee, owner, or employee/owner?

                  Comment

                  • #10
                    knucklehead0202
                    Veteran Member
                    • Aug 2008
                    • 4087

                    Originally posted by Whiterabbit
                    you need a lathe type trimmer. It will cover all the obscure stuff. If you shoot thousands of something, then you get the specialty trimmers (from LEE up to Giraud and anywhere between.)
                    agreed, many of the lathe-type trimmers are pretty much universal so you can trim just about anything on them. I agree that if you have a particular cartridge you do a lot of then a dedicated one will be faster and easier, but if you do more than one or 2 things it would be a good idea to have a universal. I use the lyman, which is a good trimmer and a good value, if I had it to do over I'd probably pay more for the powered one. someday i'll buy the adapter to use a drill on it, I just don't trim in enough volume now to worry too much about it.

                    Comment

                    • #11
                      Whiterabbit
                      Calguns Addict
                      • Oct 2010
                      • 7602

                      if you want a cheap powered adapter (depending on design of course) some all-thread or a screw with the head cut off and installed into the shaft will work just fine as an attachment point for a cordless drill.

                      Pretty straightforward, actually. And the price is right!

                      This is exactly how my RCBS trimmer is powered.

                      Comment

                      • #12
                        TMangram
                        Junior Member
                        • Jan 2014
                        • 3

                        The jig is up!

                        Comment

                        • #13
                          bigbossman
                          I need a LIFE!!
                          • Dec 2012
                          • 11357

                          Originally posted by Enfield47
                          I use the the Lee case length gauge and cutter for my rifle cases, including 30 carbine. For just a few bucks you can get the cutter, lock stud and case length gauge. Chuck it in a drill and you're in business. Unless you are processing in mass this should work for you.
                          Heck........ I process 30-06 in bulk, and the Lee trimmer chucked into my drill press works great for me.
                          Always looking for vintage Winchester and Marlin lever action rifles. Looking to sell? Know of one for sale? Drop me a line!

                          "Give a conservative a pile of bricks and you get a beautiful city. Give a leftist a city and you get a pile of bricks."

                          Comment

                          • #14
                            knucklehead0202
                            Veteran Member
                            • Aug 2008
                            • 4087

                            Originally posted by Whiterabbit
                            if you want a cheap powered adapter (depending on design of course) some all-thread or a screw with the head cut off and installed into the shaft will work just fine as an attachment point for a cordless drill.

                            Pretty straightforward, actually. And the price is right!

                            This is exactly how my RCBS trimmer is powered.
                            why the hell didn't I think of that? ha, the clever little f**kers at lyman either pinned the handle on or ground the screw/bolt head flat. i'll just grind the bastard off and see what I can do with it. worst case I spend the 20 bucks and get the power adapter but i'll bet I can do something with it. thanks Bunny!

                            Comment

                            • #15
                              Whiterabbit
                              Calguns Addict
                              • Oct 2010
                              • 7602

                              can always drill it and tap it. had to go on somehow. Fortunately my RCBS was already good to go.

                              Comment

                              Working...
                              UA-8071174-1