Unconfigured Ad Widget

Collapse

Need help with Primer Selection

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • castgold
    Senior Member
    • Feb 2012
    • 1531

    Need help with Primer Selection

    For .308 using Varget
    Rifle 1 is a bolt action 20" and 1:10
    Rifle 2 is semi auto 16" and 1:10
    Projectiles for both for now will be Berger 168gr boat tail

    Looking at the CCI #200 and the Federal #210. Are these suitable? What others should I look for? I'm at work and don't have my manuals in the office but would like to order before they go OOS.
  • #2
    kentactic
    Senior Member
    • Sep 2012
    • 1127

    I'm no expert reloader so check the heat on it but I see your looking at the Fed. 210, I'd look at the Fed. 210M. It can be hard to find because everyone uses it but the M stands for Match as in match grade(not magnum like some would guess). Its variance from one primer to the next is much smaller so its a great start to an accurate load. Federal uses that in their match grade stuff which rivals the best loads out their at a very good price.

    Varget just so happens to be a close match to the magical blend federal uses in their match grade loads. So if you used a sierra bullet and federal brass you nearly have the exact same load. Federal brass sucks from what I hear though. Thats how they make affordable match loads. Cheaper brass they aren't going to reload anyways.
    Last edited by kentactic; 11-20-2013, 1:18 PM.

    Comment

    • #3
      nothing4u
      Senior Member
      • Nov 2006
      • 1378

      If you don't want to wait for 210M, BR2, wolf/tula. Go to Big5 and pick up winchesters.
      Politicians should only be allowed one term in office, then one term in jail.

      Comment

      • #4
        CK_32
        I need a LIFE!!
        • Sep 2010
        • 14369

        Both will work. I use CCI 200 for my 700 filled with Varget.


        Only thing I'd worry about was slam fires in a semi. But I'm sure both will hold up fine.
        For Sale: AR500 Lvl III+ ASC Armor

        What's Your Caliber??


        My Youtube channel

        Comment

        • #5
          Germz
          Vendor/Retailer
          • Apr 2013
          • 4691

          I've only used federals for rifle brass and have never had a slam fire even while trying to induce one in an AR platform. however it you think it'll be an issue just pick up some tula or CCI 34's
          Retired Account

          Comment

          • #6
            castgold
            Senior Member
            • Feb 2012
            • 1531

            Thanks guys. Gonna get some Winchesters locally and watch for the 210M.

            Comment

            • #7
              mike.h
              Senior Member
              • Sep 2011
              • 1621

              yep, Big 5 carries WLRP
              USAF 1966-70
              SEA '69-70
              NRA Life Member

              Comment

              • #8
                NorCalFocus
                Veteran Member
                • Aug 2013
                • 3913

                I'm also using the Winchesters with Varget.

                Comment

                • #9
                  Spanky8601
                  Senior Member
                  • Apr 2010
                  • 2296

                  You might want to read this. Good info.. http://www.sksboards.com/smf/index.p...&topic=56422.0 and this http://www.jamescalhoon.com/primers_and_pressure.php
                  May I always be the type of person my dog thinks I am

                  Comment

                  • #10
                    mls204
                    Senior Member
                    • Jan 2011
                    • 836

                    I use CCI 200 in my loads with Varget for my 5R, not for any reason other than I used CCI primers when I started reloading pistol calibers so I picked them up when I started rifle loading.

                    I'm a new(ish) rifle shooter and I can get sub MOA groups pretty easily with handloads...smaller than I can get with FGMM.

                    Comment

                    • #11
                      Wrangler John
                      Senior Member
                      • Oct 2009
                      • 1799

                      I posted this somewhere before, but here it is:

                      Which primer works with which cartridge, load and rifle can only be guessed. The only way to determine actual performance is to experiment. Because primer ignition is a mechanically initiated explosive chemical reaction there are many variables in play. One of the most important seems to be the consistency of primer seating depth, and this entails uniformity of the primer pocket. It also depends on case and chamber headspace, firing pin protrusion, and firing pin impact. For all these reasons I headspace my rifles using the same set of gauges and set the firing pin protrusion between .040" and .045".

                      Then we come to the uniformity of the primer itself, cup thickness, hardness, priming mix, anvil configuration and consistency of all these between each other and over various lots. Priming mix seems to be a determining factor, with Winchester (it is claimed) having a different crystalline structure than the others, and the Russian (Wolf) primers having a more consistent Sinoxide mix. All of which doesn't matter if one particular brand shoots more consistently in your rifle and load, and the others don't.

                      The data sheet below shows the difference between primers using the same load in a .22-250 Ackley Improved and TAC powder. The rifle is a blueprinted Remington 700 action with a 24" Pac-Nor barrel, double sleeved bolt and bushed small diameter (.062") firing pin. Only the primers are different between each load.



                      Interestingly, the Remington 9-1/2 Large Rifle primer developed the highest average velocity (3,709 fps), which is in keeping with that primer's reputation of being the "hottest" available. We also find the CCI Large Rifle primer produced the lowest Extreme Spread (ES) of 30 fps, and the lowest Standard Deviation (S-D) 9. If a load is not producing satisfactory results, a change in primer may have a dramatic effect, but not necessarily the primer we expected would be better. We are looking for the lowest ES and S-D in each load, that should produce the greatest accuracy. What is confusing is that a load with the best numbers may not produce the smallest groups, and that is why we must shoot to confirm practical performance.

                      Now let's look at two groups fired with the same load, with only the primer being the variable:



                      The group on the left uses the Federal 205M Gold Match Primer, while the group on the right uses the plain vanilla Winchester Small Rifle Primer. Both groups were fired in the same 24" 1:9" twist Pac-Nor polygonal rifled barrel on a Savage Precision Target Action. Bullet is the Nosler 40 grain BT Lead Free.

                      So what it all means is that primers have a great effect on performance, and one brand may not translate to the most accurate across all cartridges and rifles. This is where the handloader becomes a alchemist, turning science into an art, and spends numerous hours at the range to develop his or her masterwork. That's a good thing, yes?
                      Last edited by Wrangler John; 11-21-2013, 2:34 AM.

                      Comment

                      • #12
                        popeye4
                        Senior Member
                        • Nov 2008
                        • 1534

                        At this point, any port in a storm. You can even use magnum primers for non-magnum loads (not so much the other way around). As with any other changes in components, back off the load a bit (5-10% is the usual rule of thumb I've seen) and work back up to ensure you don't exceed max pressure. Once primers become more plentiful again, you can get finicky about what flavor you prefer.
                        sigpic
                        NRA Life Member
                        CRPA Life Member

                        Comment

                        • #13
                          Enfield47
                          Calguns Addict
                          • Sep 2012
                          • 6385

                          I've used Winchester LRP with good success in 7.5x55 Swiss, .303 British, and .30-06. My shooting skills are not nearly as good as Wrangler John and I only use iron sights, but all my old guns will put the rounds on target without fail using the Winchester primers.

                          Comment

                          • #14
                            Seaweed02
                            Senior Member
                            • Jun 2012
                            • 1650

                            Great thread

                            I had to post on this thread so I can find it again. It is some great info for someone like me who is wanting to get into reloading. Tag....

                            Comment

                            Working...
                            UA-8071174-1