Figured out my load for my CZ's...

[bsumoba]

Just figured I share my data if you wanted to have a starting point. I was able to see good results from the same grain size, OAL, and bullets.

* use this data at your own risk!!!

CZ SP-01
Powder: Unique
Bullet: 124gr FMJ AND 124gr Montana HP
Primer: CCI 500
OAL: 1.120"
Lee Factory Crimped
Tried: 4.8 - 5.0 - 5.2
Best accuracy/precision: 5.2

CZ P-01
Powder: Unique
Bullet: 124gr FMJ AND 124gr Montana HP
Primer: CCI 500
Tried: 4.8 - 5.0 - 5.2
OAL: 1.120"
Lee Factory Crimped
Tried: 4.8 - 5.0 - 5.2
Best accuracy/precision: 5.2

[Bastard]

NICE! but why couldn't you be using power pistol or titegroup... now I have to work up my own load.

[bsumoba]

dont have power pistol or titegroup. I have HP-38, which is going to sit until I finish my bucket of unique.

at the time, i couldn't find PP which was my #1 choice, but I have had no complaints with unique. looks like the powder is burning alright, but I need to be at higher charge loads. at 4.8, I was seeing lots of residue. 5.2 was MUCH better.

[BenHa]

ahahahha we are the total opposite xD I have unique, which is going to sit until I fnish up my bucket of w231 (same as hp38)

[uhlan1]

Thanks, have some Unique I haven't tried in 9mm and some CZ's.