Unconfigured Ad Widget

Collapse

Varget question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    NRAhighpowershooter
    Super Moderator
    CGN Contributor - Lifetime
    • Jun 2003
    • 6485

    Originally posted by ocabj
    Yes, Varget isn't optimal for lightweight .223 rounds. Stick to ball powders for under 70 in .223.

    I'm not so sure about that... this is a 5 shot group with 50gr Nolser BT's at 100yds out of my 24" Varmit rig

    'Just Don't Point, Squint, and Laugh! '

    Distinguished Rifleman Badge #2220

    Comment

    • #17
      Ahhnother8
      Senior Member
      • Feb 2007
      • 1454

      Sorry if I implied Varget is a ball powder. It is not. It is extruded, though MUCH smaller than other extruded powders such as 4064 or 4350. Varget is LESS temperature sensitive than many powders, but you will see velocity changes with significant temperature changes. Don't believe it? Shoot it over a chronograph and see for yourself.

      We compete year-round here, so shoot in temperatures from 35-105 degrees. I used 4 different lot numbers of Varget last summer. One was garbage, one was EXCEPTIONAL, and two were pretty good. Just tested a new lot number, the fifth different one, yesterday and the day before, over a chrono. It appears to be a pretty good lot, but not exceptional. It is also the slowest Varget I have used in a couple of years. More powder = good!! Oh, the barrel was chambered four days ago and has less than 100 rounds through it. Picked a load from the testing and shot it at 1000 yards today, prone, irons, sling. Fired 5 shots: 1-10, 4-X's. Was working on a different gun, so that is all I shot. But that was enough to tell me the load was good to go.

      Varget is your friend...

      Lane

      Comment

      • #18
        draconianruler
        Senior Member
        • Jan 2006
        • 1590

        How does varget compare with IMR4895? I'm thinking of switching to Varget after I'm all out.
        sigpicNRA LIFE MEMBER

        Comment

        • #19
          jandmtv
          Calguns Addict
          • Oct 2007
          • 5800

          thats funny, I'm making a switch from varget to IMR4895
          Looking for RPR or Precision Rifle Accessories? Check out Anarchy Outdoors. http://www.anarchyoutdoors.com?afmc=1w

          Comment

          • #20
            draconianruler
            Senior Member
            • Jan 2006
            • 1590

            Originally posted by jandmtv
            thats funny, I'm making a switch from varget to IMR4895
            Any specific reason? I was thinking of switching due to all the talk about how good Varget is. You don't hear much talk about 4895 even though its given me good accuracy in .308. I haven't loaded any .223 yet so can't comment on that.
            sigpicNRA LIFE MEMBER

            Comment

            • #21
              jandmtv
              Calguns Addict
              • Oct 2007
              • 5800

              why switch if you get good accuracy on 4895?

              im swithing to see if i can get better accuracy on Remmy .308
              Looking for RPR or Precision Rifle Accessories? Check out Anarchy Outdoors. http://www.anarchyoutdoors.com?afmc=1w

              Comment

              • #22
                draconianruler
                Senior Member
                • Jan 2006
                • 1590

                Originally posted by jandmtv
                why switch if you get good accuracy on 4895?

                im swithing to see if i can get better accuracy on Remmy .308
                Seeing if I can get better accuracy out of Varget. Lots of talk about how good Varget is so I wanted to test it out myself.
                sigpicNRA LIFE MEMBER

                Comment

                • #23
                  BigMac
                  Senior Member
                  • Oct 2005
                  • 1117

                  I run Varget in my .308 but I like H335 in my AR.
                  gunnutsnospam@sbcglobal.net

                  Comment

                  • #24
                    jandmtv
                    Calguns Addict
                    • Oct 2007
                    • 5800

                    I have been loading Varget and Reloder15 in both .223 and .308 for a while now. I keep hearing how good IMR4895 and IMR4064 is in .308 so i want to give it a try. Im going to be using Ramshot TAC for my plinking .223 rounds and Re15 for 77gr match rounds.
                    Looking for RPR or Precision Rifle Accessories? Check out Anarchy Outdoors. http://www.anarchyoutdoors.com?afmc=1w

                    Comment

                    • #25
                      jmzhwells
                      Senior Member
                      • May 2008
                      • 1111

                      How about Win 748 for .223. I used varget for some loads, but have switched to the 748 as recommended by the gun shop.
                      Originally posted by bohoki
                      oh man i think i threw up in my mouth a little
                      Originally posted by Soldier415
                      My staff is now at 10 beers, and has a tactical red lgt ont it, and is being ttached to me by a single point sling

                      i AM THE WISEST MOST TACTICAL WIZARD

                      Comment

                      • #26
                        supersonic
                        Calguns Addict
                        • May 2007
                        • 5885

                        Amazing velocity (without sacrificing accuracy) can be had w/ BLC-2, especially if you "fine-tune" your brass & make sure your bullets are within .5 gr. of each other. I use an OAL tool to seat the projectile .020" off the lands & trim the meplats off all the 68gr.+ bullets (the longer ones tend to be a bit inconsistent when measured from the ogive to the tips, YMMV) when I want consistent grouping past 300 yds.

                        *FACTORY-CERTIFIED ARMORER AT YOUR SERVICE IN SACRAMENTO, ALSO AR-15 WORK/ YUGO M59/66 SKS NIGHT SIGHTS REPLACEMENT - 916-516-7380*

                        Comment

                        • #27
                          jandmtv
                          Calguns Addict
                          • Oct 2007
                          • 5800

                          Originally posted by jmzhwells
                          How about Win 748 for .223. I used varget for some loads, but have switched to the 748 as recommended by the gun shop.
                          I was going to use win748 for .223, but Ramshot TAC is $17.50 cheaper per 8lbs, and you use less in grains vs. win748 for a 55gr bullet. Plus i read a lot of good reports on TAC, burns clean and accuracy was very good.

                          4.5cents for TAC per round (24.5 grains)
                          5.6cents for Win748 per round (26 grains)

                          8lbs of TAC = 2285 rounds of .223 (24.5 graims) Cost $104.50
                          8lbs of Win748 = 2153 rounds of .223 (26 grains) Cost $122.00

                          so TAC is cheaper, and you get over 130 more rounds out of a 8lb jugg.
                          Looking for RPR or Precision Rifle Accessories? Check out Anarchy Outdoors. http://www.anarchyoutdoors.com?afmc=1w

                          Comment

                          • #28
                            jmzhwells
                            Senior Member
                            • May 2008
                            • 1111

                            You may have too much time on your hands, but thanks for the great info
                            Originally posted by bohoki
                            oh man i think i threw up in my mouth a little
                            Originally posted by Soldier415
                            My staff is now at 10 beers, and has a tactical red lgt ont it, and is being ttached to me by a single point sling

                            i AM THE WISEST MOST TACTICAL WIZARD

                            Comment

                            • #29
                              jandmtv
                              Calguns Addict
                              • Oct 2007
                              • 5800

                              LOL! you are welcome.
                              Looking for RPR or Precision Rifle Accessories? Check out Anarchy Outdoors. http://www.anarchyoutdoors.com?afmc=1w

                              Comment

                              • #30
                                ar15barrels
                                I need a LIFE!!
                                • Jan 2006
                                • 57201

                                Originally posted by Ahhnother8
                                I used 4 different lot numbers of Varget last summer. One was garbage, one was EXCEPTIONAL, and two were pretty good. Just tested a new lot number, the fifth different one, yesterday and the day before, over a chrono. It appears to be a pretty good lot, but not exceptional.
                                If I were to go to the range and chrono my 308 varget load, what kind of extreme spreads and standard deviations should I be seeing to indicate if I have a good or bad lot?
                                I'm running 46.5gr under a moly 155 SMK.
                                Randall Rausch

                                AR work: www.ar15barrels.com
                                Handguns: www.handgunbarrels.com
                                Bolt actions: www.700barrels.com
                                Foreign Semi Autos: www.akbarrels.com
                                Most work done while you wait on a scheduled shop visit.

                                Comment

                                Working...
                                UA-8071174-1