Unconfigured Ad Widget

Collapse

Lee Loader for .223?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Donut
    Member
    • May 2007
    • 477

    Lee Loader for .223?

    My boss was telling me about the Lee Loader (http://www.leeprecision.com/cgi/cata...leeloader.html) and how cheap and effective it is, at the downside of being slow. For me it being slow is easily overlooked since it is highly inexpensive. However before I go out and buy it, I have a couple questions:

    - The Lee loader doesn't resize the entire case, but that's ok as long as I only use brass that comes out of the AR that I plan on shooting it in, right?

    - Will the lack of a crimp be less than safe in an AR? Is there even a moderate likelihood of the bullets either unseating themselves or setting back in the case, jacking up the pressure?

    - Is there a crimping tool that doesn't require a press?

    What I'm mainly looking for is a way to make inexpensive 69-77 gr ammo for the range. While the rifle is just a plain ol' 1:7" Iron sighted AR, I'd like the ammo to be more accurate than say, factory Remington 55gr UMC that I get at wally world. Would the Lee Loader work for that?
    NRA Life Member

    "We sleep safely at night because rough men stand ready to visit violence on those who would harm us." - George Orwell
  • #2
    jandmtv
    Calguns Addict
    • Oct 2007
    • 5800

    I dont think the Lee Loader will work for you as it only neck sizes the brass. It would work for a bolt action, but not in a semi auto (like your AR) which needs the brass to be full length sized.
    Looking for RPR or Precision Rifle Accessories? Check out Anarchy Outdoors. http://www.anarchyoutdoors.com?afmc=1w

    Comment

    • #3
      Blwnbwtie
      Member
      • Jan 2008
      • 300

      The lee loader will not work in an AR. If you want to get started for cheap you at least need to get one of these http://leeprecision.com/cgi/catalog/.../rlpress1.html

      Lee also has pretty decent kits to get you started for around 100 bucks. Then all you need would be a set of dies. But for a semi auto you need to full length size the case for it to feed properly.

      Comment

      • #4
        What Just Happened?
        Veteran Member
        • Sep 2007
        • 2504

        Graf & Sons, the reloading authority, has a wide selection of reloading supplies, shooting supplies, ammo and more.


        At the least. Plus you get the reloading book.

        Comment

        • #5
          Donut
          Member
          • May 2007
          • 477

          Well crap. If I'm going to spend more than $18, what about this - decent for the money?



          So it's got the four-hole turret... what dies do I need... these? http://www.midwayusa.com/eproductpag...eitemid=434975

          What about the fourth hole? (And no, not the one Quagmire found. LOL)

          Sorry for all the n00b questions, and thanks for the help so far!
          NRA Life Member

          "We sleep safely at night because rough men stand ready to visit violence on those who would harm us." - George Orwell

          Comment

          • #6
            Blwnbwtie
            Member
            • Jan 2008
            • 300

            The turret press isnt a bad idea, just add a reloading book and a set of dies and your good. I have learned over the past few month that the saving on the lee dies isnt worth it though. I still use lee presses but i upgraded my dies. For a little more money at least go with rcbs dies. The lee dies dont size down far enough which could cause issues in a semi auto.

            I would go with these http://www.midwayusa.com/eproductpag...eitemid=440502

            and this

            Comment

            • #7
              Blwnbwtie
              Member
              • Jan 2008
              • 300

              also depending on your powder charge, you may need to get either a seperate powder measure or the double disk kit in order to drop enough powder. And if you use the auto disk you will need one of the rifle charging dies.

              Comment

              • #8
              Working...
              UA-8071174-1