Unconfigured Ad Widget

Collapse

Loading .40 S & W for the First Time

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bill1957
    Senior Member
    CGN Contributor
    • Jan 2013
    • 997

    Loading .40 S & W for the First Time

    I want to load .40 S & W for the first time. I have Unique powder, 180 gr. Extreme plated flat nose bullets, Winchester SPP and various once fired brass. I'm finding very little data for these components. I'm thinking of starting at 5.3 gr. with a OAL of 1.125. What do you more experienced reloaders think?
    CGN/CGSAA Contributor
    NRA Life Member
  • #2
    SacJDog
    Member
    • Sep 2012
    • 168

    I just got into reloading and have loaded around 100 rounds of 40 SW, but am using accurate no 5 and sr 4756. Have you tried Alliant's site. http://www.alliantpowder.com/reloade...29&bulletid=42

    Comment

    • #3
      nubrun
      Senior Member
      • Jul 2012
      • 998

      I believe that extreme recommends using low-mid range jacketed data for a similar bullet weight and profile. Check their website.

      Comment

      • #4
        Bill1957
        Senior Member
        CGN Contributor
        • Jan 2013
        • 997

        Originally posted by SacJDog
        I just got into reloading and have loaded around 100 rounds of 40 SW, but am using accurate no 5 and sr 4756. Have you tried Alliant's site. http://www.alliantpowder.com/reloade...29&bulletid=42
        I have, but they only list Speer bullets which are hollow points. I'm thinking I may need to get some different powder to find some decent load data. Unique works real well for me in 9mm and .380.
        CGN/CGSAA Contributor
        NRA Life Member

        Comment

        • #5
          nubrun
          Senior Member
          • Jul 2012
          • 998

          I really like Unique for the 180 gn in 40. I used 5.2 gns for 180 gn lead bullets.

          Do you not have a reloading manual? All reloading manuals should list a similar 180 gn load using unique. Start low and work up to mid range.

          Comment

          • #6
            Bill1957
            Senior Member
            CGN Contributor
            • Jan 2013
            • 997

            Originally posted by nubrun
            I really like Unique for the 180 gn in 40. I used 5.2 gns for 180 gn lead bullets.

            Do you not have a reloading manual? All reloading manuals should list a similar 180 gn load using unique. Start low and work up to mid range.
            I have 3 manuals plus some load data sheets and none of them have 180 gr plated bullets using Unique.

            Lyman's 49th has a jacketed hollow point but nothing for a flat nose.

            Lees reloading guide does not have Unique for a 180 bullet.

            Alliant's guide only lists Speer hollow points.

            I also have Ken Walters Pet Loads and don't see what I want.

            Is there a better guide out there?
            CGN/CGSAA Contributor
            NRA Life Member

            Comment

            • #7
              Bumslie
              CGN/CGSSA Contributor
              CGN Contributor
              • Oct 2011
              • 5358

              From xtremes website.


              Our Copper Plated Bullets can be run at mid-range jacketed velocities or higher end lead velocities. We do not recommend velocities over 1500 FPS (Feet Per Second) and only a light taper crimp.
              Any velocities over 1200 FPS we recommend either our Heavy Plate Concave Base or Hollow Point products for superior accuracy. We do not recommend velocities over 1500 FPS (Feet Per Second) and only a light taper crimp.
              - All of our Hard Cast Lead Bullets are approximately 18 on Brinell, our Cowboy lead bullets are approximately 15 on Brinell.
              NRA Life Member
              WARNING: This post may contain material offensive to those who lack wit, humor, and common sense. Some overly sensitive "men" will be offended.
              Originally posted by ivanimal
              I love you! (some Homo)
              Originally posted by ivanimal
              I am a Gay muslim sometimes.
              Originally posted by Kestryll
              OP you are an uninformed tool.
              Go Broncos!
              Go Kings Go!

              Comment

              • #8
                rockdogz
                Member
                • Oct 2009
                • 447

                For .40, I usually use 5.6 grains of Unique with 180 grain plated bullets. Of course always start low and work up a load yourself with your own gun...

                Comment

                • #9
                  CalTeacher
                  Senior Member
                  • Oct 2010
                  • 828

                  I shoot 5.3 gr of Unique under a 180gr bear creek bullet at 1.135 oal in my G-22 limited gun. Mild recoil, burns clean, makes major, and plenty accurate.

                  Comment

                  • #10
                    at_liberty
                    Senior Member
                    • Jun 2010
                    • 699

                    Originally posted by Bill1957
                    I have 3 manuals plus some load data sheets and none of them have 180 gr plated bullets using Unique.

                    <snip>
                    Lees reloading guide does not have Unique for a 180 bullet.
                    My Lee manual has the same lead 180 that others are mentioning...5.2-5.5 gr Unique.

                    There has been oft repeated mention of using lead load ranges for plated bullets, certainly as a starting point. The similarity or redundancy in load results is probably why these manuals don't list all the possible variations.

                    Comment

                    • #11
                      Bill1957
                      Senior Member
                      CGN Contributor
                      • Jan 2013
                      • 997

                      Originally posted by at_liberty
                      My Lee manual has the same lead 180 that others are mentioning...5.2-5.5 gr Unique.

                      There has been oft repeated mention of using lead load ranges for plated bullets, certainly as a starting point. The similarity or redundancy in load results is probably why these manuals don't list all the possible variations.

                      Ok, I see the lead load data in Lee's manual. I will load up a few starting at 5.2, 5.4 and 5.6 and see what I get. I'll update when I can get to the range to try them out.

                      Thanks everyone for your inputs.
                      CGN/CGSAA Contributor
                      NRA Life Member

                      Comment

                      Working...
                      UA-8071174-1