Unconfigured Ad Widget

Collapse

Min load for 38 spl ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • seasnake
    Member
    • Jan 2013
    • 210

    Min load for 38 spl ?

    Anybody have a recipe for a light load for 38 spl . I will be using unique and 115 gr round nose bullets . The reason is for target practice for my mom , the factory loads are to strong for her to get comfortable with her lady S&W revolver .

    My Hornady loading book starts at 800 fps I have never loaded less than the min .
  • #2
    Dutch3
    I need a LIFE!!
    • Oct 2010
    • 14181

    I cast some "bullets" using a hot glue gun and a Lee 105gr SWC mold. I loaded them with no powder, just the primer.

    I gave some to a co-worker, he told me his mom loves them for practice with her snubby. You can trap them in a box stuffed with an old towel for reuse.
    Just taking up space in (what is no longer) the second-worst small town in California.

    Comment

    • #3
      Ghost_Maker
      Member
      • Feb 2012
      • 336

      Originally posted by Dutch3
      I cast some "bullets" using a hot glue gun and a Lee 105gr SWC mold. I loaded them with no powder, just the primer.

      I gave some to a co-worker, he told me his mom loves them for practice with her snubby. You can trap them in a box stuffed with an old towel for reuse.
      Hmm.. I might need to look into this thing you are saying... I hate going to the range with the .38... I need something I can just shoot from the concealed carry and just fart around with in the house...
      GFY

      Comment

      • #4
        rsrocket1
        Veteran Member
        • Feb 2010
        • 2774

        If you have Red Dot, Titewad or Clays, they would be better choices for light loads because they build up more pressure without building up velocity which equals recoil. I've gone down as low as 2.5g with those powders with a 158g bullet and they shot fine. If you go down below 4g Unique, I'm sure they'll exit the barrel, but you'll get a lot of smoke, unburned flakes, sooty cases and possibly a good deal of sparks (burning flakes) coming from the cylinder gap.

        A big problem with lightweight guns is that the recoil is felt much worse in a light gun than that in a heavy gun. I shoot 5g Unique behind a 158g bullet in my Ruger Service Six and that heavy gun hardly jumps at all with that stout load. I also notice a big increase in perceived recoil when going from a 200 pf load in an all steel 1911 to a 175 pf load in a plastic M&P 40.

        Comment

        • #5
          XDRoX
          Veteran Member
          • Mar 2009
          • 4420

          As stated above Unique is the wrong powder for light loads. You won't get a complete burn. It will be very dirty.
          IMO trail boss is the absolute best powder for light 38spl loads. I don't have my data in front of me but I have a TB 38spl load that is accurate as hell and feels just like a 22 out of a full size revolver. It's my go to load for 38spl. It's probably the best load I've ever loaded since I got into reloading. I can look up the load data if you want it.
          Chris
          <----Rimfire Addict


          Originally posted by Oceanbob
          Get a DILLON...

          Comment

          • #6
            JagerDog
            I need a LIFE!!
            • May 2011
            • 15910

            2.5gr bullseye. Any bullet you want.
            Palestine is a fake country

            No Mas Hamas



            #Blackolivesmatter

            Comment

            • #7
              Javi
              Veteran Member
              • Dec 2010
              • 4540

              On the Hodgdon data center, the minimum for a 158 grain lead cast bullet brings it at 661 fps using IMR "Trail Boss".
              Originally posted by d4v0s
              My girlfriend and i used froglube last night in a pinch and it works great.
              R.I.P. Thomas C.

              Comment

              • #8
                cindynles
                Veteran Member
                • Dec 2008
                • 2806

                Originally posted by XDRoX
                As stated above Unique is the wrong powder for light loads. You won't get a complete burn. It will be very dirty.
                IMO trail boss is the absolute best powder for light 38spl loads. I don't have my data in front of me but I have a TB 38spl load that is accurate as hell and feels just like a 22 out of a full size revolver. It's my go to load for 38spl. It's probably the best load I've ever loaded since I got into reloading. I can look up the load data if you want it.
                I agree. 3.0gr of Trail Boss with 158gr SWC is like shooting a 22 out of my 4" S&W 586.
                "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote." B.Franklin,1759

                Comment

                • #9
                  XDRoX
                  Veteran Member
                  • Mar 2009
                  • 4420

                  Originally posted by cindynles
                  I agree. 3.0gr of Trail Boss with 158gr SWC is like shooting a 22 out of my 4" S&W 586.
                  I don't think I've tried 158gr bullets with Trail Boss yet. I believe I was around 2.5gr of TB under 148gr WC's. I do have a bunch of 158gr bullets but they are harder. Not sure if they'll work well with slower velocities. They may lead. I should try them though.

                  Maybe it was 3.5gr of TB. I need to look.

                  Gotta love a 586. What a nice revolver. One of the best ever made IMO.
                  Chris
                  <----Rimfire Addict


                  Originally posted by Oceanbob
                  Get a DILLON...

                  Comment

                  • #10
                    seasnake
                    Member
                    • Jan 2013
                    • 210

                    Thanks for the info , I will look for some Trail Boss .

                    Comment

                    • #11
                      scotchblade
                      Senior Member
                      • Oct 2012
                      • 795

                      Originally posted by seasnake
                      Thanks for the info , I will look for some Trail Boss .
                      Try Third Generation Shooting Supply. Look under IMR. It goes fast, so don't delay.

                      Comment

                      • #12
                        toyotaguy
                        Senior Member
                        • Jan 2011
                        • 761

                        I load 2.0 grains of trail boss under a 148grain double base wadcutter from bear creek. These are loaded for my moms snub nose and she loves them, much like shooting a 22, accuracy is good at the sub 15yd targets she shoots at. They often won't penetrate 1/2plywood backed with 1/2 pine. These are very very slow. We haven't had issues with leading but these bullets are moly coated.
                        sigpic
                        Proud NRA member.

                        Calguns Contributor

                        CRPA Member

                        Comment

                        • #13
                          Ferrum
                          Janitors Mop
                          CGN Contributor - Lifetime
                          • Aug 2011
                          • 4431

                          Originally posted by seasnake
                          Thanks for the info , I will look for some Trail Boss .
                          FYI, they have it on the shelf at the Gun Range off of Watt...

                          Comment

                          Working...
                          UA-8071174-1