Unconfigured Ad Widget

Collapse

Brass or chamber problem **new pics**

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    draconianruler
    Senior Member
    • Jan 2006
    • 1590

    Like Ben said, my MkII had a slight bulge even with already formed DTC ammo of different brass lots he provided to test. I did have 1 case split in the middle when fireforming but that is out of almost 80rds. I did notice that the slight bulge is only on 1 side of the brass and that ring (I believe its where the chamber starts) is not even. In other words, it appears my brass is not sitting straight in the chamber.

    At first, we thought maybe the chamber was out of spec. Chris at Bohica measured some barrels he had in the shop and said they were all within spec. Even with the bulge, my fire formed brass still measured to within spec . My upper is on its way to Chris at Bohica as we speak to be re-bareled for the crooked chamber. So far Chris has provided EXCELLENT customer service. I'm hopeful that will correct my brass bulging problem but now it seems like it maybe more then an off chamber
    sigpicNRA LIFE MEMBER

    Comment

    • #17
      draconianruler
      Senior Member
      • Jan 2006
      • 1590

      Originally posted by mrkubota
      That upper I'll have the chance to chamber cast on Friday, so that should tell the tale then.


      //Ben
      Definately interested into what the results are. Keep us posted
      sigpicNRA LIFE MEMBER

      Comment

      • #18
        christopher6968
        Junior Member
        • Apr 2006
        • 72

        Thanks for the pix, I have never seen a primer look like that before

        Originally posted by brando
        Here's the flat primers I was comparing them to...

        http://www.box.net/shared/sbyjqp2ck0

        Comment

        • #19
          christopher6968
          Junior Member
          • Apr 2006
          • 72

          Originally posted by mrkubota
          I'll have the chance to chamber cast on Friday, so that should tell the tale then.

          //Ben
          Did you get to make the chamber cast?

          Comment

          • #20
            draconianruler
            Senior Member
            • Jan 2006
            • 1590

            Originally posted by christopher6968
            Did you get to make the chamber cast?
            ditto....inquiring minds want to know
            sigpicNRA LIFE MEMBER

            Comment

            • #21
              mrkubota
              Senior Member
              • Oct 2005
              • 1372

              Haven't got the cast done yet... the local guy didn't show with the upper, so we'll have to reschedule...

              If anybody else in the Redlands area has a Mk2 FAR-50 in .50DTC I'd like to get a cast of it's chamber too.

              Comment

              • #22
                draconianruler
                Senior Member
                • Jan 2006
                • 1590

                Originally posted by mrkubota
                Haven't got the cast done yet... the local guy didn't show with the upper, so we'll have to reschedule...

                If anybody else in the Redlands area has a Mk2 FAR-50 in .50DTC I'd like to get a cast of it's chamber too.
                Any luck with the chamber cast?
                sigpicNRA LIFE MEMBER

                Comment

                Working...
                UA-8071174-1