Unconfigured Ad Widget

Collapse

Help in reloading 32 Win Special

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Henry Shooter
    Senior Member
    • Aug 2008
    • 1099

    Help in reloading 32 Win Special

    I need some assistance in reloading for the 32 Win Special. Im loading for a Marlin 36.
    I have hunter specialty 170 grain lead flatpoint. The Lyman 49 says coal is 2.605" which I believe is wrong. The Speer manual says 2.565. Pressing the bullet to the bullets seating shoulder puts the coal at 2.450.
    Can anyone provide some insight on what coal would work best.
    Thanks
    Henry
  • #2
    Dutch Henry
    Senior Member
    • Feb 2012
    • 733

    Max COAL is 2.565" with the 170 bullet. There isn't a lot of data out there on this old timer. You might look at the article by Chuck Hawks for more info. http://www.chuckhawks.com/32spec.htm

    Comment

    • #3
      JagerDog
      I need a LIFE!!
      • May 2011
      • 14993

      See where 0.030" off the lands is. Good starting point.
      Last edited by JagerDog; 07-10-2013, 5:25 PM.
      Palestine is a fake country

      No Mas Hamas



      #Blackolivesmatter

      Comment

      • #4
        Henry Shooter
        Senior Member
        • Aug 2008
        • 1099

        Thanks guys. Appreciate your time.
        Henry

        Comment

        • #5
          mjmagee67
          Veteran Member
          • Jun 2011
          • 2771

          The 32 Win Spc is a classic lever gun cartridge and as such the COL is based on where the cannulare is. You want a firm roll crimp so you don't get any bullet set back due to recoil.
          If you want change you have to put in your 2 cents, you can't just sit on the sidelines and whine.

          Comment

          Working...
          UA-8071174-1