picked up 1000 SPP at Big 5. Didn't look close enough at the box until I got home. Turned out to be Magnum SPP. All I load is 9mm, can I use these?
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
can I use these?
Collapse
X
-
sure, but cut your powder down to minimum load, and be prepared to work up the load againOriginally posted by KestryllThis guy is a complete and total idiot.
/thread.
ΦΑ -
Yup. Back off a hair on your load.
"If we make enough laws, we can all be criminals."
Walnut media for bright brass
http://www.calguns.net/calgunforum/s...d.php?t=621214Comment
-
I usually drop 10% off my load when using magnum primers. For my regular 9mm with 5.8 grains of power pistol i back down to 5.3 grains when using magnums.Comment
-
When you guys are talking about dropping your loads down. Are you using a chrono and achieving roughly the same velocity with the slightly lower powder charge? or is this more just to make sure you don't over-pressure?Now we know!Comment
-
Sure, just rework your load like you should anytime you change components, use start loads and work back up. You will likely find the same load you liked before will be the same good load.When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."Comment
-
I would say 7-10% is all you need to back off, unless you were way over max already. If you were midrange or low end to start, 5% will be fine.
BTW, YMMV, but for my minimum power factor 9mm loads I consider SPP and MSPP primers interchangeable without any powder adjustment. In my case these are loads down near the minimum charge level already and testing for me has shown minimal velocity variation between the two types of primers so I don't even bother changing powder charge for this. BUT, I do not recommend this unless you are sure of things and have done some testing.Last edited by GeoffLinder; 05-29-2013, 10:46 PM.Comment
-
Comment
-
They just started carrying primers in the last couple weeks. Some say stores said it's temporary, others have been told they'll be getting other components also. I haven't heard of anyone picking any up in the Sac area, mostly SoCal people. I'll post up if any in Sac happen to have them if I get out in the next couple days.Comment
Calguns.net Statistics
Collapse
Topics: 1,867,679
Posts: 25,161,251
Members: 357,365
Active Members: 5,130
Welcome to our newest member, Kahiau18.
What's Going On
Collapse
There are currently 17462 users online. 69 members and 17393 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.


Comment