50BMG Loading Data

[okdo]

Looking for loading dat for the Win 860 Powder, Thanks, Dudley

[jammer2k]

I have found that this video has given me all the reload details I have ever needed

http://www.youtube.com/watch?v=98I1i8Toj8E

[rksimple]

Should be in the reloading forum, but check out reloadersnest.com Might have what you're looking for.

[50 Shooter]

It's good to start low and work up, a good starting load is 205 grs. From there you can work your way up checking for pressure signs and accuracy changes.

I would use 235 grs. as a MAX load and wouldn't venture any higher then that. Most people find that they get the best accuracy somewhere between 215-220 grs. of powder. Just remember to be safe and if you see any signs of over pressure, STOP!

Remember, this info is free and if you blow yourself up, YOU did something wrong. Follow all the regular guidelines for reloading and don't cut any corners. Inspect all of your equipment and components and be sure it's all in good condition. If you find a questionable piece of brass, toss it as it's not worth destroying your rifle for a .50 cent piece of brass.

Lastly, here's a good site for reloading info on the .50 BMG http://www.hevanet.com/50shooter/