World's Finest Trimmer Question

[HK Dave]

Hey folks... having trouble using the WFT.

I full resize my brass with Redding Type S Match dies. I then tumble off the imperial sizing wax with walnut.

My problem lies in the fact that about 1/2 of my brass will not go into the WFT and can't be cut.

Any ideas?

[aleng888]

Are you use a full length resizing dies or neck resizing dies ?

[HK Dave]

Full length Redding Type S Match die.

http://www.midwayusa.com/product/271533/redding-type-s-match-bushing-2-die-set-308-winchester

[blockfort]

you can't even get them in just past the shoulder?

[damndave]

I use the same setup and have never had an issue. The brass won't fit into the WFT at all?

[bryant]

same here, using rcbs full length small base die on .223 i think is some military brass.

[ironpete]

Hey folks... having trouble using the WFT.

I full resize my brass with Redding Type S Match dies. I then tumble off the imperial sizing wax with walnut.

My problem lies in the fact that about 1/2 of my brass will not go into the WFT and can't be cut.

Any ideas?

What do you mean by "will not go into"?

Does that mean that the brass simply doesn't get to the cutting bit?
Or is it that the brass is too big to be inserted into the trimmer?

-Pete