Unconfigured Ad Widget

Collapse

Finding the right load?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jkgts1
    CGN/CGSSA Contributor
    • Apr 2007
    • 590

    Finding the right load?

    I have a few questions about working up a good load. I have been reloading for about a year now, but I have been pretty much sticking to what the load manual tells me. Obviously don't exceed the max or min load. When I'm working up a good load, am I looking for a combination that is going to give me the most consistant velocity? I am shooting a Rem. 700 in .308 with a Rock Creek heavy barrel. When testing loads how much variation in grains should I be making, up/down? As of now I have been shooting Sierra matchking hpbt 168gn, Remington brass, and 43.5gn of varget. Which is fine, but want to see if I can improve it. I am not in competitions or anything, just a hobby.

    Thanks
  • #2
    30Cal
    Senior Member
    • Jan 2006
    • 1487

    Originally posted by jkgts1
    When I'm working up a good load, am I looking for a combination that is going to give me the most consistant velocity?
    It's a good indicator, but targets are more important.

    When testing loads how much variation in grains should I be making, up/down?
    For a first pass, I use 0.5gr increments. Fine tune after you've narrowed the field.

    Comment

    • #3
      jlmurphy
      Member
      • Oct 2005
      • 212

      Finding the perfect load is an exercise in frustration. If you multiply the number of bullets, powders, cases, primers, and seating depths by each other it becomes obvious that the barrel will be shot out before you can try even a small number of combinations. Go to Benchrest.com and see what other shooters are using. Most are using either a 155gr. or a 174 gr for .308 Win. Pick a good case, most use Lapua, Varget is a decent choice for powder. Do a search on Ladder testing, it is a way of selecting a powder charge without shooting too many groups, then play with the seating depth. A chronograph will be necessary before too long. Have fun, don't go crazy, and good luck.

      Comment

      • #4
        brando
        Veteran Member
        • Feb 2006
        • 3694

        Yeah, Load Development is a real blend of art and science. I used to look at what loads work best for others with similar rifles and work up towards that load. Then I got Quickload and now my load development time is cut in half. I start with getting my rifle specs as dialed-in as possible in QL, choose a bullet and a target velocity, then play with the powder charge and COAL parameters until I get a barrel time that's close to optimum. Then I load 5-shot strings around that load, usually +/- 0.7 gr.
        --Brando

        Comment

        • #5
          30Cal
          Senior Member
          • Jan 2006
          • 1487

          I use my "reject" components for load development. I've got a batch of cases I pulled out due to offcenter flashholes, heavy and light cases. I also intentionally throw a large variation in powder weights. I have no interest in finding fussy loads that rely on cherrypicked components.
          Last edited by 30Cal; 03-23-2008, 1:49 PM.

          Comment

          • #6
            1911su16b870
            CGN/CGSSA Contributor
            CGN Contributor
            • Dec 2006
            • 7654

            My 2 cents worth on load development, others please chime in

            1. Call the bullet manufacturers tech support and talk with them on what would possibly be a good combo with your rifle, barrel twist, range etc. Order a few boxes of those bullets.
            2. Get/borrow a Stoneypoint/Hornady OAL gage and caliper gage to determine your rifle's chamber dimensions/leade to rifleing for each bullet.
            3. Load per your manuals or powder manufacturer specs, 5 rounds in 0.5-gr increments and set back the bullet 0.02 to 0.04 for hunting applications.
            4. Go to the range and make every shot count using your pre-zeroed rifle.
            5. Look at the targets, determine which combinations are worthy of additional work.
            6. Make up additional 5 rounds combos, setting your bullet back in 0.005 increments up to 0.025. You can do this with two or three types of different primers.
            7. Go to the range, and make every shot count to see what comibinations are it!

            8. Next month scratch your head, why did the best combos look like a shot gun blast on paper. IMO this phenonmenon is a lack of consistency in the hand loading process or loss of shooting fundementals.
            "Bruen, the Bruen opinion, I believe, discarded the intermediate scrutiny test that I also thought was not very useful; and has, instead, replaced it with a text history and tradition test." Judge Benitez 12-12-2022

            NRA Endowment Life Member, CRPA Life Member
            GLOCK (Gen 1-5, G42/43), Colt AR15/M16/M4, Sig P320, Sig P365, Beretta 90 series, Remington 870, HK UMP Factory Armorer
            Remington Nylon, 1911, HK, Ruger, Hudson H9 Armorer, just for fun!
            I instruct it if you shoot it.

            Comment

            • #7
              scrat
              Senior Member
              • Apr 2007
              • 1516

              Case prep too. Your doing this as a hobby now. however its all about case prep. Look at the professionals. How many of us hobby people skip the cleaning of the flash holes and making sure primer pockets and flash holes are uniform. You might want to try different powders at this point. Your getting into what works best with my gun. one powder only gives you one kind of results
              sigpic

              Comment

              • #8
                thmpr
                Veteran Member
                • Dec 2005
                • 3785

                Got great results with 44 grains and 41.9 grains. Both gave sub moa results at 100 yards with 5 shot groups.
                Use at your own risk.
                NRA Life Member

                Comment

                • #9
                  Jicko
                  Calguns Addict
                  • Dec 2005
                  • 8774

                  Originally posted by jkgts1
                  I have a few questions about working up a good load. I have been reloading for about a year now, but I have been pretty much sticking to what the load manual tells me. Obviously don't exceed the max or min load. When I'm working up a good load, am I looking for a combination that is going to give me the most consistant velocity? I am shooting a Rem. 700 in .308 with a Rock Creek heavy barrel. When testing loads how much variation in grains should I be making, up/down? As of now I have been shooting Sierra matchking hpbt 168gn, Remington brass, and 43.5gn of varget. Which is fine, but want to see if I can improve it. I am not in competitions or anything, just a hobby.

                  Thanks
                  Really depends on how anal you are. Some people stop @ 1MOA ish. Some people want 3/4MOA some want 1/2MOA.

                  And then ES/SD, these translate to extreme distance's "bullet drop" (most of the time).

                  41.5gr IMR4895 will duplicate M852 rounds (2550+/-30fps @ 78ft).

                  Anyways, this link contains MASSIVE info, and its sub-links contains even more: http://www.6mmbr.com/308Win.html

                  Like these:
                  6mmBR.com is the best guide for 6mm BR Benchrest precision shooting, complete with 6BR FAQ, Reloading Data, Shooter Message Boards, Reader Polls, and Photo Gallery. Match event calendar and rifle competition accuracy training tips. Equipment reviews (.243 bullets, 30BR cartridge, 6mm Norma Improved, gun barrels, powders, primers, gunstocks, dies), accurizing, 1000yd ranges, ballistics, component sales, tools, gunsmiths. Articles archive for reloading, marksmanship, gunsmithing, and varminting.

                  6mmBR.com is the best guide for 6mm BR Benchrest precision shooting, complete with 6BR FAQ, Reloading Data, Shooter Message Boards, Reader Polls, and Photo Gallery. Match event calendar and rifle competition accuracy training tips. Equipment reviews (.243 bullets, 30BR cartridge, 6mm Norma Improved, gun barrels, powders, primers, gunstocks, dies), accurizing, 1000yd ranges, ballistics, component sales, tools, gunsmiths. Articles archive for reloading, marksmanship, gunsmithing, and varminting.

                  6mmBR.com is the best guide for 6mm BR Benchrest precision shooting, complete with 6BR FAQ, Reloading Data, Shooter Message Boards, Reader Polls, and Photo Gallery. Match event calendar and rifle competition accuracy training tips. Equipment reviews (.243 bullets, 30BR cartridge, 6mm Norma Improved, gun barrels, powders, primers, gunstocks, dies), accurizing, 1000yd ranges, ballistics, component sales, tools, gunsmiths. Articles archive for reloading, marksmanship, gunsmithing, and varminting.

                  6mmBR.com is the best guide for 6mm BR Benchrest precision shooting, complete with 6BR FAQ, Reloading Data, Shooter Message Boards, Reader Polls, and Photo Gallery. Match event calendar and rifle competition accuracy training tips. Equipment reviews (.243 bullets, 30BR cartridge, 6mm Norma Improved, gun barrels, powders, primers, gunstocks, dies), accurizing, 1000yd ranges, ballistics, component sales, tools, gunsmiths. Articles archive for reloading, marksmanship, gunsmithing, and varminting.
                  Last edited by Jicko; 03-24-2008, 2:13 AM.
                  - LL
                  NRA Certified Firearm Instructor
                  sigpic

                  New to Calguns, check here first:
                  http://www.calguns.net/calgunforum/s...ad.php?t=56818

                  Comment

                  • #10
                    30Cal
                    Senior Member
                    • Jan 2006
                    • 1487

                    Originally posted by scrat
                    Case prep too. Your doing this as a hobby now. however its all about case prep. Look at the professionals. How many of us hobby people skip the cleaning of the flash holes and making sure primer pockets and flash holes are uniform. You might want to try different powders at this point. Your getting into what works best with my gun. one powder only gives you one kind of results
                    I've seen some hard data put together by a test engineer that shows that case prep barely makes a miniscule impact. Primer pocket cleaning I see as a useful function. Aside from that, if it chambers, fires and extracts safely, you're getting 99.99%.

                    Comment

                    • #11
                      scrat
                      Senior Member
                      • Apr 2007
                      • 1516

                      Originally posted by 30Cal
                      I've seen some hard data put together by a test engineer that shows that case prep barely makes a miniscule impact. Primer pocket cleaning I see as a useful function. Aside from that, if it chambers, fires and extracts safely, you're getting 99.99%.
                      i can prove you wrong.
                      First of all we are talking about for top performance. The primer pocket and flash hole is like the spark plugs in your car. You wont see performance race car drivers driving cars with dirty plugs. They are running cylinders at there top end performance. Any how show this to your engineer friend then have him perform the same test if you want. By the way hard data does not mean anything. here is the challenge if you have never cleaned your primer pockets or flash hole dont. continue shooting maybe a couple more reloads. Then take that case. put a new primer in it mount it in a vice then strike the back of it. have someone record the Hard Data. Then take the same case. Clean out the primer pocket and ream the flash hole. Then repeat. I doubt you will have the same results. if you dont have the same results the hard data you got before was bogus.




                      Last edited by scrat; 03-25-2008, 11:20 PM.
                      sigpic

                      Comment

                      • #12
                        30Cal
                        Senior Member
                        • Jan 2006
                        • 1487

                        Clean primer pockets allow for more uniform seating pressure and thereby ensure more uniform ignition. That's been shown quite clearly (poorly seated primers don't always go bang). I didn't argue that.

                        Deburring holes, and other cutting operations (beyond what it takes to get safe and reliably functioning loads) have little if any measurable benefit. It's very difficult to argue with actual targets.

                        Comment

                        • #13
                          Ahhnother8
                          Senior Member
                          • Feb 2007
                          • 1454

                          but I have been pretty much sticking to what the load manual tells me. Obviously don't exceed the max or min load.
                          Well, not always necessary or desirable. If you check several manuals, they will have different min and max loads. Sometimes by several grains.

                          When I'm working up a good load, am I looking for a combination that is going to give me the most consistent velocity?
                          Not with the bullet you have chosen. You are likely shooting under 800 yards??? If so, then you should look for the most accurate load. Consistent velocity is not terribly important until past 800 yards.

                          When testing loads how much variation in grains should I be making, up/down?
                          With .308, 1/2 a grain is sufficient. To super-fine tune, 1/4 a grain variation. Any less than this and you will not see enough difference in velocity to make any valid conclusions.

                          I am shooting a Rem. 700 in .308 with a Rock Creek heavy barrel.
                          EVERY barrel ever made is different!!!!!!! Do not worry about trying to duplicate any other loads anywhere. Also, do not pick the "most accurate" load from any loading manual. Load up test rounds for your gun, test them and choose the one that works best in YOUR gun. After a thousand rounds, the barrel MAY wear enough that it will no longer like your previous load. If so, simply test again until you find another load. Re: max loads - YOUR barrel may not allow you to get near max. Conversely, it may want to shoot over max. Let it, the brass, the primers, and the bullets tell you what it likes.

                          Lane

                          Comment

                          • #14
                            1lostinspace
                            Calguns Addict
                            • Oct 2006
                            • 7848

                            I load in .5 then pick the best group and go up .2 or down .02 then up or down .01
                            There are sniper everywhere and nowhere.....who knows what is out there.

                            PUREMMA
                            MIXED MARTIAL ARTS ACADEMY

                            Comment

                            • #15
                              scrat
                              Senior Member
                              • Apr 2007
                              • 1516

                              Originally posted by 30Cal

                              It's very difficult to argue with actual targets.

                              Nor pictures
                              sigpic

                              Comment

                              Working...
                              UA-8071174-1