primer problems need wisdom!

[tiller]

That is a sign of over pressure. Start with the min load and work up looking for signs of pressure. I would pull the remaining rounds down and start over.

ook will do! did they push out because of the pressure?? i checked each neck after firing and everything looked fine

[E_Shaw90]

That is a sign of over pressure. Start with the min load and work up looking for signs of pressure. I would pull the remaining rounds down and start over.

[tiller]

im at the max load in my hornady book and in the middle in my speer??

[kurac]

sometimes that happens with light loads.

[tiller]

soo i recently started shooting my remington 700 sps tactical in .223 rem


i worked up some reloads just to fire form brass and break in the barrel

the load was

LC09 brass
wsr primer
26 grains of varget
55 grain hp tnt(speer)

now i know i seated all my primers under the rim of the base, but they seem to be pushing out! this is the first time firing this rifle. but not my first 223 reloads... i have loaded thousands of rounds for my ar without ever seeing a problem like this?

i need some veteran wisdom to tell me whats going on! i dont think i flattened them?? idk?














what primers look like before firing