Unconfigured Ad Widget

Collapse

2000+fps 9mm????

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RuggedJay
    Senior Member
    • Jul 2011
    • 1267

    2000+fps 9mm????

    What would be the best conbination of powder and bullet to achieve 2000fps for a 9mm?
  • #2
    mjmagee67
    Veteran Member
    • Jun 2011
    • 2771

    Joking right?
    If you want change you have to put in your 2 cents, you can't just sit on the sidelines and whine.

    Comment

    • #3
      freonr22
      I need a LIFE!!
      • Dec 2008
      • 12955



      searching ive only seen up to 1400? someone has the quik load software maybe
      sigpic
      Originally posted by dantodd
      We will win. We are right. We will never stop fighting.
      Originally posted by bwiese
      They don't believe it's possible, but then Alison didn't believe there'd be 350K - 400K OLLs in CA either.
      Originally posted by louisianagirl
      Our fate is ours alone to decide as long as we remain armed heavily enough to dictate it.

      Comment

      • #4
        XDRoX
        Veteran Member
        • Mar 2009
        • 4420

        You can't make a 9mm fly that fast without picking pieces out of your teeth.
        Chris
        <----Rimfire Addict


        Originally posted by Oceanbob
        Get a DILLON...

        Comment

        • #5
          rsrocket1
          Veteran Member
          • Feb 2010
          • 2774

          9.0g Power Pistol
          .356 Lee 105g SWC
          MV = 1976 fps

          Oh yeah, 16" barrel required and you should tie the gun to a tree to pull the trigger, peak pressure = 37,773 psi

          the COL needs to be 1.169" which means 0.047" seat depth, but this is Fantasyland anyway.

          QL does estimate a little low with hot pistol cartridges so you may reach 2000 fps a little sooner and since this is just an estimate, you might also blow up your gun a little sooner too.
          Last edited by rsrocket1; 01-14-2013, 4:56 PM.

          Comment

          • #6
            call-in
            Senior Member
            • Apr 2011
            • 646

            Someone was able to reach 1800fps in castboolits forum.

            -Colin
            ︻デ═一

            Originally posted by KillAllGuns
            Black color scheme makes the bullets more deadly.

            Comment

            • #7
              RuggedJay
              Senior Member
              • Jul 2011
              • 1267

              No Im NOT joking. This will be for a Carbine with a 16" barrel. I want maximum penetration and energy. Im thinking a lighter bullet pushed really fast.

              Comment

              • #8
                Triple R Munitions
                Banned
                • Jun 2009
                • 1004

                Can you use a solid brass projectile? May not need the speed but the stiffness of projectile should do what ever your trying to accomplish.

                Comment

                • #9
                  Bill Steele
                  Calguns Addict
                  • Sep 2010
                  • 5028

                  Why not get one of these: http://www.marlinfirearms.com/Firear...re/1894CSS.asp

                  Pretty easy to get to 2000fps with a 125gr bullet, only a few thousandths larger in diameter than 9mm, its a carbine, just sayin'....
                  When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."

                  Comment

                  • #10
                    Dark Mod
                    Veteran Member
                    • Feb 2011
                    • 4284

                    Saw some videos on youtube about the Hi Point C9, testing its durability with hot loads, and double charges. I would assume a double charge should be good for 2000 fps but its not something anyone would want to repeat.

                    9mm wasnt really meant to go that fast, but with a carbine/slow powder/super light bullet you could probably get pretty close.

                    Comment

                    • #11
                      DRAB_81
                      Senior Member
                      • Feb 2009
                      • 2482

                      9x25 Dillon
                      90gr XTP (.355)
                      12.2gr Longshot
                      CCI350 Primers
                      1.260" OAL
                      Glock 20SF w/6" LWD Longslide

                      2054fps Average

                      Other than a carbine, that's the only way you're going to do it while preserving your eyes and fingers.

                      Comment

                      • #12
                        Bill Steele
                        Calguns Addict
                        • Sep 2010
                        • 5028

                        Originally posted by DRAB_81
                        9x25 Dillon
                        90gr XTP (.355)
                        12.2gr Longshot
                        CCI350 Primers
                        1.260" OAL
                        Glock 20SF w/6" LWD Longslide

                        2054fps Average

                        Other than a carbine, that's the only way you're going to do it while preserving your eyes and fingers.
                        I wish I would have said that, but then, I didn't know.

                        Wow!
                        When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."

                        Comment

                        • #13
                          Packy14
                          Calguns Addict
                          • Jul 2008
                          • 5312

                          which of your guns do you want to blow up?
                          NRA Lifetime Member

                          1A-2A = -1A

                          Comment

                          • #14
                            kurac
                            Veteran Member
                            • Dec 2005
                            • 2917

                            just get some of this stuff, it should do the trick, out of a 16" barrel, you should be able to pick up an additional 300fps maybe even 400

                            www.culinagrips.com
                            "custom grips for shooters by shooters"

                            Comment

                            • #15
                              M27
                              Senior Member
                              • Apr 2011
                              • 871

                              Originally posted by RuggedJay
                              No Im NOT joking. This will be for a Carbine with a 16" barrel. I want maximum penetration and energy. Im thinking a lighter bullet pushed really fast.
                              to get the deeper penetration you are looking for and the velocity you are looking for I would go with a 90gn CMJ. If you use a 90gn XTP with that high of velocities I would bet you would have bullet failure with in 10in. It is designed to be used between 800 and 1400 fps

                              I have contradictory thoughts on powder though.

                              two powders that I have used to get higher velocities out of a 4" barrel are Power pistol and VV N350.

                              but with a longer 16'' barrel you could potentially use a much slower powder to achieve higher velocities. Food for thought.
                              I will share my opinion and my load data, BUT I am just a guy with too many cigars and too many guns. Whatever I say is probably wrong.

                              Comment

                              Working...
                              UA-8071174-1