Dillon Order Wait Support Group Thread

[ZNiner]

Carbide .223 and Carbide 9mm dies. I just don't have much luck when it comes to getting my reloading stuff in a timely manner.

I'm still waiting for the Forster Co-Ax to be in stock with Brownell's/Cabela's.

[DRAB_81]

After building my fourth AR, I finally decided to keep one, so I ordered everything I'll need for my 650 to load 223.

I ordered all this through Brian Enos on 1/7, but in all the madness it sounds like he's sending orders straight to Dillon.

RT1200 Trimmer
223 Trim Die
223 Steel Dies
Universal Decapping Die
223 Caliber Conversion Kit
SR Casefeed Plate
Super Swage 600

[goodlookin1]

After building my fourth AR, I finally decided to keep one, so I ordered everything I'll need for my 650 to load 223.

I ordered all this through Brian Enos on 1/7, but in all the madness it sounds like he's sending orders straight to Dillon.

RT1200 Trimmer
223 Trim Die
223 Steel Dies
Universal Decapping Die
223 Caliber Conversion Kit
SR Casefeed Plate
Super Swage 600

Brian never stocks dillon reloading components. He has them drop shipped from Dillon to your house. It is because of this that he has to charge your card immediately instead of waiting for shipping because he's got to put the order in to Dillon.

[DRAB_81]

Brian never stocks dillon reloading components. He has them drop shipped from Dillon to your house. It is because of this that he has to charge your card immediately instead of waiting for shipping because he's got to put the order in to Dillon.

Good to know.

[the_tunaman]

Yeah, I can sympathize... I ordered a Super 1050 set up for .223, with an extra toolhead, the RT1200B and the RF 1000 and am in the same boat.

Of course, as mentioned since components are a challenge to locate it makes the wait a little more tolerable.

Hope we all get our orders fulfilled soon!
Roger

[Maddawg46]

Back in the late 80s primers became very scarce. Since then I never let myself run too low. After this craziness subsides, let it be a lessen. Stock up! I still have all components for loading all calibers. Yes a lot are 20 years old.

[Maddawg46]

Yep in 1990 Winchester large pistol primers were going for $14 for a brick. Makes you kind of sick....huh?

[RacerX7]

After building my fourth AR, I finally decided to keep one, so I ordered everything I'll need for my 650 to load 223.

I ordered all this through Brian Enos on 1/7, but in all the madness it sounds like he's sending orders straight to Dillon.

RT1200 Trimmer
223 Trim Die
223 Steel Dies
Universal Decapping Die
223 Caliber Conversion Kit
SR Casefeed Plate
Super Swage 600

I recieved the RT1200 trimmer, 223 and 308 trim dies, Super Swager and 223, 9mm case gages about a week after I ordered. the rest of my stuff was back ordered. I ordered directly from dillon.

[ZNiner]

While waiting for the other stuff to show up I'll put together my bench. I just got this kit in yesterday and need to get the wood for it:

http://www.amazon.com/2x4basics-90164-Workbench-Shelving-Storage/dp/B0030T1BRE/ref=sr_1_4?ie=UTF8&qid=1358610301&sr=8-4&keywords=bench+kit

Anyone use one of these kits as the basis for their reloading bench?

I am going to go with 8 feet long and 4 feet wide for the dimensions.

Oh and back to the Dillon topic, I also have a super swager waiting to show up too. I ordered it along with the dies I mentioned in my previous post from Brian Enos.

[prc77]

Some items showed up yesterday.

3 tool heads
primer flip tray
roller handle
40 dies
9mm conv. kit
bins
calipers

everything else BO'd

[the_tunaman]

At least you got something to keep you interested... still waiting for a delivery and have already read through the PDF manual twice cover to cover at this point.

Hoping next week brings many boxes!

Roger

[Bart430]

I ordered a 550 from Brian, no telling when it will show. I need to get some conversion kits for a 45-70 and 308 also. I may just order them from Dillon so my credit card wont be charge until its shipped. But overall I would order from BrianEnos.com for anything. He responded to my email questions and made some good recommendations. I cant blame him for the wait, but I do plan on exercising a right they are not trying to take away in Nov.

[ZNiner]

Got my 9mm dies in but am still waiting in the .223 dies and Super Swager.

[tiller]

If you read on there site it says it takes 3-6 weeks to ship

[prc77]

another box on the way, only 9lbs. so its not the press