Unconfigured Ad Widget

Collapse

I dont get it...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Vampyredark
    Senior Member
    • Sep 2011
    • 502

    I dont get it...

    So I was thinking about purchasing one of these to break myself in. However, it states that it is not recommended for semi automatic pistols, yet it is a re-loader for 9mm. Can someone maybe help me figure this out?

    visit here: http://leeprecision.com/lee-loader-9mm-luger.html
  • #2
    M1NM
    Calguns Addict
    • Oct 2011
    • 7966

    Still have the one I bought in the late 60's for my straight wall 357 mag. Worked well but would every once in awhile blow off a primer when "tapping" it in. It was great for learning the basics but painfully slow. If you've got the budget step up to at least a single stage press - RCBS Jr is great for starting out.

    Comment

    • #3
      Vampyredark
      Senior Member
      • Sep 2011
      • 502

      Yeah, its just because I dont have the space I would like to have to set up a full rig. But, I am new to it and this is less than 40 bucks to learn. I am just concerned about why they would state that it is not recommended for semi autos. It does not have the same warning about the 38 set.

      Comment

      • #4
        mycrstuff
        Senior Member
        • Nov 2008
        • 1435

        The ad states it neck sizes only. That is for bottle neck rifle cartridges. 9mm is a straight wall case it will size the whole case.

        For that price you should double what you are looking to spend and get a single stage press. You will be a lot happier and will be able to expand into other calibers. If you get the LEE single stage kit toss the scale as it is a POS and buy one that works.

        With the press you show above a powder measure is used. (the yellow thing). It is like measuring spoons for the kitchen. It works but your loads will vary a lot.

        Comment

        • #5
          Vampyredark
          Senior Member
          • Sep 2011
          • 502

          Single stage press require a work bench? If so, it is out of the question for now. My last residence would have been ideal for a full set up, but that is no more, I have limited space now.

          Comment

          • #6
            Dark Mod
            Veteran Member
            • Feb 2011
            • 4284

            Originally posted by mycrstuff
            The ad states it neck sizes only. That is for bottle neck rifle cartridges. 9mm is a straight wall case it will size the whole case.

            For that price you should double what you are looking to spend and get a single stage press. You will be a lot happier and will be able to expand into other calibers. If you get the LEE single stage kit toss the scale as it is a POS and buy one that works.

            With the press you show above a powder measure is used. (the yellow thing). It is like measuring spoons for the kitchen. It works but your loads will vary a lot.
            For reals, get the single stage press, SO much more useful. For 2x the cost you get 10x the performance. If its a question of getting the lee loader and not reloading at all, by all means get the lee loader.

            A single stage can be used in very little space, bolt it to a folding sawhorse and it store it under your bed.

            Comment

            • #7
              johnny1290
              Senior Member
              • Apr 2011
              • 1598

              Brother, that kit is for mountain men in a cabin in the winter that need only a few shells all year.

              You really need a single stage. I think I paid 20 or $30 for my Lee el cheapo and I use it for 7.62x39 and 7.62x54r and resizing .223. If you don't need volume it works fine. Think around 50 rph for pistol vs. like 5 or 10 per hour with that kit(guessing).

              A Pro 1000 progressive is about 350rph.

              If you can't get a press mounted anywhere(some guys mount one to a board then clamp it to a dining room table) there's a hand press lee makes but I can't remember if it does everything, I was going to use it for resizing cast boolits.

              good luck, reloading is fun.

              Comment

              • #8
                Vampyredark
                Senior Member
                • Sep 2011
                • 502

                Hmm... I see. okay. then I will get a single stage. Which one is best??

                go here to see: http://leeprecision.com/reloading-presses/single-stage/

                Comment

                • #9
                  Vampyredark
                  Senior Member
                  • Sep 2011
                  • 502

                  Hmm... I see. okay. then I will get a single stage. Which one is best??

                  go here to see: http://leeprecision.com/reloading-presses/single-stage/

                  Comment

                  • #10
                    Vampyredark
                    Senior Member
                    • Sep 2011
                    • 502

                    or how is this?

                    Comment

                    • #11
                      Dark Mod
                      Veteran Member
                      • Feb 2011
                      • 4284

                      get the kit:



                      And dont buy from lee, better prices will be had at amazon

                      Comment

                      • #12
                        echo884
                        Member
                        • May 2009
                        • 422

                        I have a friend who has the 45 ACP version of the loader kit. Works for his 45 semi. But, like everyone is saying, if you have the slightest of room and want to spend a little bit more, the single stage is the way to go. You can expand to what ever calibers you want. That said, the hand-press kit is another alternative. Less pounding and popping primers and more arm work out. With the single-stage and hand press, you will still need some loading trays to hold your rounds in process.

                        Good luck!

                        Comment

                        • #13
                          the led farmer
                          Member
                          • May 2011
                          • 194

                          This is better than the lee loader. And you don't need a bench to make it happen.

                          breech lock hand press

                          Comment

                          • #14
                            stphnman20
                            Calguns Addict
                            • Feb 2005
                            • 6583

                            Op, how often do you shoot?

                            Comment

                            • #15
                              rsrocket1
                              Veteran Member
                              • Feb 2010
                              • 2774

                              If your shooting sessions consist of "a box of 50 then go home" once or twice a month, you will probably be OK with the hand press, but even then you would eventually get sick and tired of reloading and either spend the money for a bench mounted press or simply buy commercially loaded ammo (if you can find it).

                              Look into getting a bench mounted press, even the cheap Lee "C" press and mount it on a Black and Decker Workmate. Even the cheaper version is better than a hand press or the "whack-a-mole" loader.

                              A couple of cheap C-clamps and you have a bench mounted portable press. Put all the reloading gear in a box, fold up the workmate and you are all cleaned up. Figure on about 50 cartridges per hour single stage.

                              Comment

                              Working...
                              UA-8071174-1