Unconfigured Ad Widget

Collapse

460 s&w reloading question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • BDJ
    Member
    • Dec 2009
    • 154

    460 s&w reloading question

    So I was wondering if any of you could answer a question for me.

    I just bought the Lee carbide 460 dies and there is no crimp die. Don't I need to crimp after seating the bullet? I'm used to the 4 die set that lee sells with a crimp die.
  • #2
    Deadwood Dick
    Member
    • Dec 2011
    • 185

    The seating die also crimps. But, a separate factory crimp die will put a better crimp on the case. A good crimp is important on a heavy recoiling revolver.

    Comment

    • #3
      Na-vah-duh
      Member
      • Aug 2011
      • 382

      A heavy roll crimp is required when loading the .460 s&w.

      Comment

      • #4
        BDJ
        Member
        • Dec 2009
        • 154

        So then what do you recommend that I do, buy a separate crimp die? If so could you guys recommend one?

        Comment

        • #5
          Dark Mod
          Veteran Member
          • Feb 2011
          • 4284

          You want a roll crimp anyway, the seating die will do that. Taper crimp is really not ideal for 460. Dont bother buying a taper "Factory" crimp die, thats probably why it wasnt included in the die set, because its useless

          Comment

          • #6
            Munk
            Senior Member
            • Jun 2010
            • 2124

            For use in a revolver, you should crimp well enough to avoid significant shifting of the other cartridges under recoil. This is where your cannelure and a roll-crimp come in handy.

            If you're using it in a single-shot of some kind, you may as well not crimp them at all (but never let a revolver shooter load more than 1 of your handloads at a time).
            Originally posted by greasemonkey
            1911's instill fairy dust in the bullets, making them more deadly.

            Comment

            • #7
              tujungatoes
              Calguns Addict
              • Dec 2006
              • 7942

              The seating die also crimps. I've had good results seating and crimping my 460's at the same time, but most people recommend crimping in a separate operation.
              sigpic
              Originally posted by Dr. Elky
              If your a man who wears white sunglasses, your probably a douche bag
              Originally posted by CSACANNONEER
              I've been know to cross dress and go the other way at certain events.

              Comment

              • #8
                Bill Steele
                Calguns Addict
                • Sep 2010
                • 5028

                You can crimp with the seater die just fine. The separate crimp die makes setup and adjustment much easier, but definitely falls into the "nice to have, extra step" category.

                This is what I would get if you go with a separate crimp die: http://www.midwayusa.com/product/963...s-and-w-magnum
                When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."

                Comment

                • #9
                  BDJ
                  Member
                  • Dec 2009
                  • 154

                  Thanks guys, I appreciate the words of wisdom! Ihave had some good success reloading 9mm and 45acp lets hope i have the same success with the 460's!!!!

                  Comment

                  • #10
                    sksman777
                    Member
                    • Sep 2011
                    • 404

                    I have loaded over 1000 rounds of the 460 s&w using the seating die to crimp. Never had an issue. I just got the Redding taper crimp its useless. I love my 460 very fun gun to shoot. I have the 12" PC barrel and it does not like lead!

                    Comment

                    • #11
                      Bill Steele
                      Calguns Addict
                      • Sep 2010
                      • 5028

                      Originally posted by sksman777
                      .... I just got the Redding taper crimp its useless. I love my 460 very fun gun to shoot. I have the 12" PC barrel and it does not like lead!
                      Interesting, I didn't think Redding made a taper crimp die for the 460S&W, I thought they only made the profile crimp version which is a roll crimp.
                      When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."

                      Comment

                      Working...
                      UA-8071174-1