Unconfigured Ad Widget

Collapse

Awesome Dillon upgrades

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • justinLB
    Member
    • Jun 2007
    • 414

    Awesome Dillon upgrades

    Hi I just found this site with some pretty cool Dillon press upgrades. They make a toolhead clamp for the 550/650 to eliminate play in the toolhead to press fit. They also make a ball bearing kit for the shellplate indexing. And a 14" powder hopper, that's twice the size of the stock hopper. Another cool accessory is the flashlight that goes in he middle hole of the toolhead to see what your doing a little better. http://www.uniquetek.com/
    We can stand here and take it like the French, or we can do something about it! - Marge Simpson
  • #2
    jandmtv
    Calguns Addict
    • Oct 2007
    • 5800

    good fine! i like the micrometer powder bar kit, and the 2X powder hopper tube.
    Looking for RPR or Precision Rifle Accessories? Check out Anarchy Outdoors. http://www.anarchyoutdoors.com?afmc=1w

    Comment

    • #3
      1911su16b870
      CGN/CGSSA Contributor
      CGN Contributor
      • Dec 2006
      • 7654

      I like that needle roller kit for the indexing wheel. I'm allways messing around with that bolt on my 550 to get it just right.
      "Bruen, the Bruen opinion, I believe, discarded the intermediate scrutiny test that I also thought was not very useful; and has, instead, replaced it with a text history and tradition test." Judge Benitez 12-12-2022

      NRA Endowment Life Member, CRPA Life Member
      GLOCK (Gen 1-5, G42/43), Colt AR15/M16/M4, Sig P320, Sig P365, Beretta 90 series, Remington 870, HK UMP Factory Armorer
      Remington Nylon, 1911, HK, Ruger, Hudson H9 Armorer, just for fun!
      I instruct it if you shoot it.

      Comment

      • #4
        6079Winston
        Member
        • Jun 2007
        • 368

        Has anyone tried the floating die toolhead yet? http://www.whiddengunworks.net/toolhead.html

        Comment

        • #5
          ar15barrels
          I need a LIFE!!
          • Jan 2006
          • 57202

          Originally posted by 1911su16b870
          I like that needle roller kit for the indexing wheel. I'm allways messing around with that bolt on my 550 to get it just right.
          Needle bearings on top won't make the adjustment work much different.
          It just eliminates the friction on top.
          Yu still have all the friction of the shellplate against the platform if you have the bolt too tight.

          In other words, yu still have to adjust it properly for it to work properly.
          The bearings won't change a thing about that.
          Randall Rausch

          AR work: www.ar15barrels.com
          Handguns: www.handgunbarrels.com
          Bolt actions: www.700barrels.com
          Foreign Semi Autos: www.akbarrels.com
          Most work done while you wait on a scheduled shop visit.

          Comment

          • #6
            30Cal
            Senior Member
            • Jan 2006
            • 1487

            I like some of the other stuff, but I don't know why you'd want to un-float the toolheads. For rifle stuff, I only keep one case on the shellplate and the slop in the toolhead ensures that everything is self-centering.

            Comment

            • #7
              1911su16b870
              CGN/CGSSA Contributor
              CGN Contributor
              • Dec 2006
              • 7654

              Originally posted by ar15barrels
              Needle bearings on top won't make the adjustment work much different.
              It just eliminates the friction on top.
              Yu still have all the friction of the shellplate against the platform if you have the bolt too tight.

              In other words, yu still have to adjust it properly for it to work properly.
              The bearings won't change a thing about that.
              Thanks Randall for the feedback. As I turn the indexing plate, that darn bolt tends to tighten. You can feel it as you turn the wheel, and then I just turn the bolt back a little and continue. If its too loose, then the rounds cant and are not perpendicular to the shell plate. I'm cleaning everything and lubing the bolt shoulder with a tiny tiny amount of CLP. Any other words of wisdom O most wise AR and Loading Guru?
              "Bruen, the Bruen opinion, I believe, discarded the intermediate scrutiny test that I also thought was not very useful; and has, instead, replaced it with a text history and tradition test." Judge Benitez 12-12-2022

              NRA Endowment Life Member, CRPA Life Member
              GLOCK (Gen 1-5, G42/43), Colt AR15/M16/M4, Sig P320, Sig P365, Beretta 90 series, Remington 870, HK UMP Factory Armorer
              Remington Nylon, 1911, HK, Ruger, Hudson H9 Armorer, just for fun!
              I instruct it if you shoot it.

              Comment

              • #8
                Pointcrossed
                Member
                • Dec 2007
                • 251

                Originally posted by 30Cal
                I like some of the other stuff, but I don't know why you'd want to un-float the toolheads. For rifle stuff, I only keep one case on the shellplate and the slop in the toolhead ensures that everything is self-centering.
                The only thing I can see unfloating the toolheads are good for is if you have a Dillion case trimmer that attaches to the toolhead. But then again the slop does help center everything.

                Comment

                • #9
                  jandmtv
                  Calguns Addict
                  • Oct 2007
                  • 5800

                  Originally posted by 1911su16b870
                  Thanks Randall for the feedback. As I turn the indexing plate, that darn bolt tends to tighten. You can feel it as you turn the wheel, and then I just turn the bolt back a little and continue. If its too loose, then the rounds cant and are not perpendicular to the shell plate. I'm cleaning everything and lubing the bolt shoulder with a tiny tiny amount of CLP. Any other words of wisdom O most wise AR and Loading Guru?
                  try some low strength loctite, any auto parts store should have it. if you dont change calibers often, you can use medium strength too.
                  Looking for RPR or Precision Rifle Accessories? Check out Anarchy Outdoors. http://www.anarchyoutdoors.com?afmc=1w

                  Comment

                  • #10
                    FortCourageArmory
                    Senior Member
                    • Apr 2007
                    • 1001

                    The one I liked at the SHOT Show was the automatic bullet feeder. Just like the auto case feeder, it drops a bullet onto the ase in station #4 thus eliminating that action on the reloader's part. All you have to do is pull the handle. The downside was the price.....over $1,000!!!
                    sigpicNRA Life Member
                    Tim & the gang
                    Fort Courage Armory
                    1518-B Los Angeles Avenue
                    Simi Valley, CA 93065
                    (805) 526-6563
                    www.fortcouragearmory.com

                    Comment

                    • #11
                      ar15barrels
                      I need a LIFE!!
                      • Jan 2006
                      • 57202

                      Originally posted by 1911su16b870
                      As I turn the indexing plate, that darn bolt tends to tighten.
                      Any other words of wisdom O most wise AR and Loading Guru?
                      Nobody ever told you there was a setscrew on the left side of the press to lock that shoulder bolt did they?

                      Adjust the shoulder bolt for proper slack in the shellplate.
                      Take a 1/8" allen key and tighten the setscrew down under the platform that sits atop the ram.
                      This setscrew is brass tipped so it will not damage the round shaft of the shoulder bolt.
                      Your shoulder bolt should not tighten during use anymore.
                      Randall Rausch

                      AR work: www.ar15barrels.com
                      Handguns: www.handgunbarrels.com
                      Bolt actions: www.700barrels.com
                      Foreign Semi Autos: www.akbarrels.com
                      Most work done while you wait on a scheduled shop visit.

                      Comment

                      • #12
                        ar15barrels
                        I need a LIFE!!
                        • Jan 2006
                        • 57202

                        Originally posted by jandmtv
                        try some low strength loctite, any auto parts store should have it. if you dont change calibers often, you can use medium strength too.
                        Use the setscrew.
                        Dillon put it there for a reason.
                        Randall Rausch

                        AR work: www.ar15barrels.com
                        Handguns: www.handgunbarrels.com
                        Bolt actions: www.700barrels.com
                        Foreign Semi Autos: www.akbarrels.com
                        Most work done while you wait on a scheduled shop visit.

                        Comment

                        • #13
                          ar15barrels
                          I need a LIFE!!
                          • Jan 2006
                          • 57202

                          Originally posted by FortCourageArmory
                          The one I liked at the SHOT Show was the automatic bullet feeder. Just like the auto case feeder, it drops a bullet onto the ase in station #4 thus eliminating that action on the reloader's part. All you have to do is pull the handle. The downside was the price.....over $1,000!!!
                          The PSI casefeeder you saw at Dillon's booth should run $600 for a 650 and I think $750 for a 1050.
                          The KISS is even cheaper I think, but I would rather support PSI as he is an ex dillon employee.
                          Randall Rausch

                          AR work: www.ar15barrels.com
                          Handguns: www.handgunbarrels.com
                          Bolt actions: www.700barrels.com
                          Foreign Semi Autos: www.akbarrels.com
                          Most work done while you wait on a scheduled shop visit.

                          Comment

                          • #14
                            CSACANNONEER
                            CGN/CGSSA Contributor - Lifetime
                            CGN Contributor - Lifetime
                            • Dec 2006
                            • 44094

                            Originally posted by ar15barrels
                            Nobody ever told you there was a setscrew on the left side of the press to lock that shoulder bolt did they?

                            Adjust the shoulder bolt for proper slack in the shellplate.
                            Take a 1/8" allen key and tighten the setscrew down under the platform that sits atop the ram.
                            This setscrew is brass tipped so it will not damage the round shaft of the shoulder bolt.
                            Your shoulder bolt should not tighten during use anymore.
                            I've had my 550 for years and was having the same problem until I talked to Dillon at SHOT 2008 and they showed me the set screw. I felt like and idiot! On the upside, I was going to ship it to them for a tune-up so, it saved me a buch in shipping. The set screw works!
                            NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
                            California DOJ Certified Fingerprint Roller
                            Ventura County approved CCW Instructor
                            Utah CCW Instructor


                            Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.

                            sigpic
                            CCW SAFE MEMBERSHIPS HERE

                            KM6WLV

                            Comment

                            • #15
                              1911su16b870
                              CGN/CGSSA Contributor
                              CGN Contributor
                              • Dec 2006
                              • 7654

                              LOL! Thank you very much Randall and CSACANNONEER!
                              "Bruen, the Bruen opinion, I believe, discarded the intermediate scrutiny test that I also thought was not very useful; and has, instead, replaced it with a text history and tradition test." Judge Benitez 12-12-2022

                              NRA Endowment Life Member, CRPA Life Member
                              GLOCK (Gen 1-5, G42/43), Colt AR15/M16/M4, Sig P320, Sig P365, Beretta 90 series, Remington 870, HK UMP Factory Armorer
                              Remington Nylon, 1911, HK, Ruger, Hudson H9 Armorer, just for fun!
                              I instruct it if you shoot it.

                              Comment

                              Working...
                              UA-8071174-1