Unconfigured Ad Widget

Collapse

223 question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • slatroni
    Member
    • Dec 2012
    • 115

    223 question

    what is you favorite load for a 1-9 twist 223?
  • #2
    TheExiled
    Veteran Member
    • Jan 2012
    • 2933

    Favorite? I can say the one I do most is bulk Hornady 55gr FMJBT with 25.5gr Varg. I load these by the hundreds for taking friends out and don't care about having the hottest or most accurate. I do several other loads for myself, but in much smaller quantities
    Greater love has no one than this: to lay down one's life for one's friends

    Comment

    • #3
      the86d
      Calguns Addict
      • Jul 2011
      • 9591

      27gr Varget under a 62 grain SS109, seems just like an M855 actual (in my A2 AR) and goes through steel plates just the same...

      Because the case is really full, I use the same charge under M193 projectiles, and these are cheaper, so I shoot them more.

      (BTW I did work up to that...)

      Comment

      • #4
        Raptor1Ronin
        Member
        • Aug 2009
        • 355

        21.5 IMR 8208XBR - 68 Hornady HPBT - Savage 11 XP TH ..

        Comment

        • #5
          Fatgunman
          Senior Member
          • Oct 2012
          • 877

          .i mis read
          BOOO anti-gun people, HOOORAAAYY GUNS!

          Comment

          • #6
            skibuff
            Senior Member
            • Sep 2011
            • 617

            55gr FMJBT 21gr Reloader 7

            Comment

            • #7
              Wrangler John
              Senior Member
              • Oct 2009
              • 1799

              The 40 grain Nosler BT Lead Free bullet, 21.5 grains of RL-10x, Remington 7-1/2BR or Federal 205M, Winchester case. 3100 fps +/-. Shoots .2's in Pac-Nor 24" 1:9" polygonal barrel, Savage bolt. Shoots .5"-.75" in Colt M-4 20" H-Bar Elite but slower around 2900 fps. Great ground squirrel load.

              Barnes 50 grain Varmint Grenade over 22.5 grains of Rl-10x. Same accuracy as above.

              Comment

              • #8
                GeoffLinder
                Senior Member
                • Jul 2009
                • 2425

                55gr Hornady bulk FMJBT over 27.5gr WW748 (both are cheap to buy) OAL at 2.235"

                69gr SMK over 25.0gr Varget (both are expensive) OAL at 2.250"

                1st recipe is for bulk loading and general blasting use but does get me around MOA or slightly better in all my AR's.

                2nd recipe is for precision at distance match use only.

                As usual, I do not recommend just duplicating the powder charge specified by anyone, reduce by at least 5% and work it back up safely in YOUR rifle. Both of these recipes are near the max you would want to use and could be unsafe to just use as is without careful testing.

                I would recommend taking at least .5gr off either recipe if you just want to dupe something and go shoot. If you shorten OAL at all, reduce charge even further.
                Last edited by GeoffLinder; 12-06-2012, 6:33 AM.

                Comment

                • #9
                  smle-man
                  I need a LIFE!!
                  • Jan 2007
                  • 10607

                  I'm loading 26.2gr of 748 with bulk 55gr FMJBT and get an accurate no high pressure signs round.

                  Comment

                  • #10
                    slatroni
                    Member
                    • Dec 2012
                    • 115

                    Thanks to everyone who replied!
                    Steve

                    Comment

                    Working...
                    UA-8071174-1