Unconfigured Ad Widget

Collapse

Hodgdon 322 load data help .223

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Exodus343
    Veteran Member
    • Jun 2012
    • 4745

    Hodgdon 322 load data help .223

    Ok so I just bought myself some Hodgdon H322 rifle powder and winchester small rifle primers

    my question is if I want to use Hornady 55 grain FMJ boat tail what should my minimum and maximum charge load be? I searched everywhere on their website and I could not find data for 55 grain FMJ
    "Adversity Introduces Us To Ourselves"

    sigpic
  • #2
    grampsx4
    Member
    • Jun 2010
    • 162

    The following came from "Metallic Cartridge Reloading" 2nd Edition published back in 1988.For 55gr. Jacketed bullet w/H322 min. 21.0gr. yielding a vel. of 2675 , max. 23.0gr. yielding a vel. of 2750. Test barrel length was 18.5". Max overall length of 2.260. No info. on twist rate.

    Comment

    • #3
      joelogic
      Calguns Addict
      • May 2008
      • 6597

      I use 22.5 with great results.
      Micro/Mini Reflex Red Dot Sight Mount for the M1, M1a/M14 platform

      Comment

      • #4
        Exodus343
        Veteran Member
        • Jun 2012
        • 4745

        Originally posted by joelogic
        I use 22.5 with great results.
        So using 22.5 grains of powder with a 55 grain fmj is ok?
        what about C.O.L.?
        "Adversity Introduces Us To Ourselves"

        sigpic

        Comment

        • #5
          Solus
          Senior Member
          • Dec 2011
          • 548

          not all barrels shoot the same now here is some load data straight from the hornady book:

          55gr bt-fmj w/c9 Boat Tail-Full Metal Jacket with cannelure
          C.O.L. 2.200
          H322- 19.gr(2800 fps)- 23.1gr(3100 fps)
          On the blue side

          Comment

          • #6
            joelogic
            Calguns Addict
            • May 2008
            • 6597

            Proceed at your own risk but the only way people blow up rifles is by using pistol powder instead of rifle powder.

            I load to mag length. 2.25".
            Micro/Mini Reflex Red Dot Sight Mount for the M1, M1a/M14 platform

            Comment

            Working...
            UA-8071174-1