I want to start reloading

[Rider1k]

Not sure if this is the right thread. I want to start reloading. I think my balls are finally big enough to actually do it. Question..... Good starters set up?

[MIAMIbaseballer]

Would be a good idea to head over to the reloading forum and start reading. There are numerous threads for newbies... Read the stickies at the top

Depends on how mechanically inclined you are, rifle or pistol, how much money you wanna spend etc....

Reloading forum: http://www.calguns.net/calgunforum/f...splay.php?f=89

[Rider1k]

Would be a good idea to head over to the reloading forum and start reading. There are numerous threads for newbies...

Depends on how mechanically inclined you are, rifle or pistol, how much money you wanna spend etc....

I am mechanically inclined with 22 years in the trades. I will only buy quality. Rifle and pistol and shotgun preferably. I guess I missed the reloading forum. I will surely look it up. Thanks

[Alex$]

For the money and versatility, go with Lee. If you decide after buying it is not for you, you haven't spent a fortune.

[rromeo]

I started with the Lee Classic Turret package. It was $230 +$30 for dies, and I was loading ammunition. You will buy more stuff later, but this will get you started.

[Oceanbob]

Good info here as well:

http://brianenos.com/

[DarkSoul]

If you want quality, reliability, and quite possibly the best CS in the industry, start with a Dillon 550. True, they are more expensive, you can expect to drop about $500 for the press ready to go, but it's versatility and quality are unmatched. Besides, if you find that reloading is not your gig, it will hold probably 90% of its value. And, if you keep it, you have a great "do everything" press.

I have a Dillon 550, 650, and 1050, and I still use the hell out of the 550. The other presses are great for bulk loading, but if you only need 25-100 rounds for hunting, match grade, or load development, the 550 again, it's hard to beat for ease of setup and repeatability.

[Oceanbob]

If you want quality, reliability, and quite possibly the best CS in the industry, start with a Dillon 550. True, they are more expensive, you can expect to drop about $500 for the press ready to go, but it's versatility and quality are unmatched. Besides, if you find that reloading is not your gig, it will hold probably 90% of its value. And, if you keep it, you have a great "do everything" press.

I have a Dillon 550, 650, and 1050, and I still use the hell out of the 550. The other presses are great for bulk loading, but if you only need 25-100 rounds for hunting, match grade, or load development, the 550 again, it's hard to beat for ease of setup and repeatability.

This^^^^^

Resale value on the 550B is fantastic and the perfect press to buy.

More info:

http://brianenos.com/pages/dillon.html

I have a 1050 and 550B. Nothing better IMO.

[Sunday]

Buy a couple of reloading manuals and study up . Reloading isn't really hard and I rather enjoy it, but it takes alot of careful. I have had a Dillon since 1992 and have loaded quite a bit of ammo . The no BS warranty is awesome. I can't say enough good about Dillons service. The Dillon dies are great .

[prob]

If you're just getting started, go with a single stage press. You'll always use it and it's much simpler and less intimidating than a progressive press. When you figure out the loads that work for you, and have mastered the fundamentals, then by all means, buy a progressive press (preferably a Dillon).

[Sky_DiveR]

Read up... Research... You Tube.... If ya can, find a business that has a seminar/class or somebody that reloads to help figure out what ya wanna get started with. Figure out your budget and type of setup to start out with since it's really easy to spend more than you were planning. Ask me how I know... or anybody that reloads for that matter.

As far as equipment... ya can't lose with any of the major brands (not that there are any minor ones). They all have great customer service. Just different colors....

[ar15barrels]

Not sure if this is the right thread. I want to start reloading. I think my balls are finally big enough to actually do it. Question..... Good starters set up?

Read my stickied threads "match ammo is too expensive" and "pistol ammo is too expensive" in the reloading forum.

[Flouncer]

No.

Stop.

Start with a single stage press so you can go slow and understand and see, feel the ammo.

Start inexpensive.

Start with single stage kit from Lee.

You will keep the Lee press and dies forever.

If, and only if, you like loading and upgrade, (not really upgrading) to more complex systems.

[1meanchevy]

No.

Stop.

Start with a single stage press so you can go slow and understand and see, feel the ammo.

Start inexpensive.

Start with single stage kit from Lee.

You will keep the Lee press and dies forever.

If, and only if, you like loading and upgrade, (not really upgrading) to more complex systems.

^^+1 . I started with a lee single stage kit, probably the best way to go, you get everything you need to get started..... although the scale sucks.
I still use a couple things I got in that kit long ago.

[Mr. Casull]

Go with a Dillon. 650 is my choice. If you buy anything else you will eventually end up with the 650 so why waste you money and buy the best there is. A single stage press is for competition shooters that shoot 1/2 inch groups at 200 yards. And that is if they turn the necks, polish the flash holes, weigh each bullet and true them up before loading. If you just want to shoot targets out to 500 yards a progressive press is the right tool. My motto is cry once and buy the best. Otherwise after you mess with the cheap stuff or a single stage press you will lose money unloading it to buy what you should have bought in the first place. Hook up with somebody that already reloads and load up a couple thousand rounds on their press and see what you think. If you only shoot a few hundred rounds a year I wouldn't bother reloading. If you shoot 1,000's then reload with a progressive. I have a Lee progressive press that I would like to unload. Only bought it because at the time Dillon didn't make the shell plate, etc. for the 500 Magnum. Now that Dillon has the conversion kit the Lee is surplus. It worked way harder to resize and deprime than the Dillon.