Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Annealing problem . . .
Collapse
X
-
Annealing problem . . .
sigpic"There is no greater feel than to be in control of 56 tons of steel and watching that 105mm round go down range and blow something up."Tags: None -
That's weird because usually when you over do it, the brass becomes really soft not brittle.
I use do it with the lights turned off. As soon as I start seeing the neck start to glow I remove it from the heat. My lapua brass about 9-10 sec.
Now I just look for this blue line that makes it way down the shoulder and count 9-10 sec.Semper Fi
IYAOYAS -
I did notice a few of those that split had very minor pitting inside the neck but not all of them. I did not notice that before.sigpic"There is no greater feel than to be in control of 56 tons of steel and watching that 105mm round go down range and blow something up."Comment
-
I anneal most of my bottle neck brass after 4-5 sizings.
I use a deep well socket to hold them and chuck the adapter up in a portable electric drill to turn the case while in the propane torch flame. 10 seconds seems to be the right amount of time, I air cool dropping them in a stainless pan when done heating.
I rarely see split mouths on rifle brass. Most of te time it is loose primer pockets that causes scrapped brass.When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."Comment
-
The primers of that era left a ammonia residue which attacks the copper in the brass case. Not good for reloading.Luck favors the prepared.
The original battle plan did not survive initial contact with the enemy.
"The things that will destroy America are prosperity at any price, peace at any price, safety first instead of duty first, the love of soft living and the get rich quick theory of life." -Theodore RooseveltComment
-
-
Not sure about that, I think brass properties are different than steel, I think quenching is OK when annealing. I don't quench because I don't want to have to dry it out before I can use it.When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."Comment
-
-
This was my first thought also. (Though, I could be wrong since it's brass and not steel or lead, I'm no metallurgist.)
I'd suggest the OP gets a steel can to drop them into and let them cool naturally.Originally posted by greasemonkey1911's instill fairy dust in the bullets, making them more deadly.Comment
-
Actually heating up brass too much will actually cause it to be brittle from my experience. I was getting splits in my neck until I learned how long to keep it in the flame. I anneal it until the neck JUST starts to change color. So it's still a very dark maroon color when I pull it off. I never let it get red or orange. Then I air cool them. It takes about 6-7 seconds on a .308 case and about 4-5 seconds on a .223 case on a 1" flame. I noticed that just as the case heads starts to get warm(happens REALLY fast), I dump it into a bucket immediately.Comment
-
I don't think this is accurate.
"Unlike steel, which will be made harder when it is cooled rapidly, brass is virtually unaffected when it is rapidly cooled. Annealing brass and suddenly quenching it in water will have no measurable effect on the brass."
This is from the very indepth article on 6mmbr.com.
Here: http://www.6mmbr.com/annealing.htmlWhen asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."Comment
-
Quenching has virtually not effect on brass.Luck favors the prepared.
The original battle plan did not survive initial contact with the enemy.
"The things that will destroy America are prosperity at any price, peace at any price, safety first instead of duty first, the love of soft living and the get rich quick theory of life." -Theodore RooseveltComment
Calguns.net Statistics
Collapse
Topics: 1,870,845
Posts: 25,176,586
Members: 358,862
Active Members: 5,398
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 30999 users online. 55 members and 30944 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment