Unconfigured Ad Widget

Collapse

Need Help with Inconsistent OAL

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #31
    Sheldon
    Senior Member
    • Oct 2005
    • 2149

    Overall length.

    Comment

    • #32
      AeroEngi
      Veteran Member
      • Oct 2010
      • 2887

      Originally posted by echang72
      sorry fellas.. im sort of new to reloading.. what is OAL?
      OverAll Length of the cartridge. Some people also call it COL for Cartridge Overall Length.

      Sent from my DROID RAZR using Tapatalk 2

      Comment

      • #33
        Whiterabbit
        Calguns Addict
        • Oct 2010
        • 7602

        Over All Length. Usually defined as the tip of the nose to the base of the cartridge. As we experiment with more different bullets where OAL may not actually be specified, or if we have a different gun than a manufacturer may test loads on, we start to care less about the OAL and more about the distance from the bullet ogive to the lands. But OAL is easy to measure and can give a baseline for repeatability measurements.
        Last edited by Whiterabbit; 11-02-2012, 12:29 AM.

        Comment

        • #34
          AeroEngi
          Veteran Member
          • Oct 2010
          • 2887

          Originally posted by Whiterabbit
          Over All Length. Usually defined as the tip of the nose to the base of the cartridge. As we experiment with more different bullets where OAL may not actually be specified, or if we have a different gun than a manufacturer may test loads on, we start to care less about the OAL and more about the distance from the bullet ogive to the lands. But OAL is easy to measure and can give a baseline for repeatability measurements.

          I think it's a combination of the bullet tip and compressing powder.


          ----------------

          whiiiiiiiiiiiiiiich reminds me. AeroEngi, you ARE measuring OAL from the ogive, aren't you? Not just putting the calipers on the bullet tip? Even VERY well regarded bullets such as bergers have bullet nose lengths that vary.

          So if you are measuring from the tip, it may be possible that your ogive positions are VERY uniform, but the OAL aren't due to inconsistent bullets.

          A very real possibility.
          I was originally measuring from the bullet tip and when I saw the inconsistencies, I went and bought the comparator. Even with the comparator I get inconsistent OAL. However, I have noticed that the OAL range is greater when measuring from the bullet tip than when measuring from the ogive.

          Sent from my DROID RAZR using Tapatalk 2
          Last edited by AeroEngi; 11-02-2012, 12:38 AM.

          Comment

          • #35
            echang72
            Senior Member
            • Feb 2009
            • 580

            thanks everyone!

            Comment

            • #36
              Whiterabbit
              Calguns Addict
              • Oct 2010
              • 7602

              Sorry about that Aero, I edited the post, you must have already quoted and were replying. I didn't catch the comparator part till after I wrote my piece.

              Missed it because the first time reading this through I was thinking more about whether this is really a problem or not. Because it seems to me your loads are so robust they can tolerate the OAL variance you are worroed about.

              Here's some perspective. A buddy of mine claims he can hit a milk jug at 600 yards on the first shot. He took an antelope close to 500 yards with the same rifle. He has also told me his rifle for some reason groups large at 100 yards, though doesn't translate to even larger groups at distance. The reasoning there is not important for this thread. My point is he achieves plenty of accuracy down range and claims 1.5 MOA at 100 yards. You are .5-.75 MOA at 100 yards? I'm pretty sure your loads achieve uniform results! Regardless of the variance in OAL.

              Comment

              • #37
                AeroEngi
                Veteran Member
                • Oct 2010
                • 2887

                Originally posted by Whiterabbit
                Sorry about that Aero, I edited the post, you must have already quoted and were replying. I didn't catch the comparator part till after I wrote my piece.

                Missed it because the first time reading this through I was thinking more about whether this is really a problem or not. Because it seems to me your loads are so robust they can tolerate the OAL variance you are worroed about.

                Here's some perspective. A buddy of mine claims he can hit a milk jug at 600 yards on the first shot. He took an antelope close to 500 yards with the same rifle. He has also told me his rifle for some reason groups large at 100 yards, though doesn't translate to even larger groups at distance. The reasoning there is not important for this thread. My point is he achieves plenty of accuracy down range and claims 1.5 MOA at 100 yards. You are .5-.75 MOA at 100 yards? I'm pretty sure your loads achieve uniform results! Regardless of the variance in OAL.
                Oh don't worry about it man. I really appreciate your help.

                You might actually be right though. Maybe OAL isn't a major contributing factor to accuracy. The only thing I worry about is if I ever decide to seat my bullets .020" from the lands. If I get a variation of .020" while seating then I could be in trouble because the ogive can potentially be touching the lands at that point.

                Sent from my DROID RAZR using Tapatalk 2

                Comment

                • #38
                  Whiterabbit
                  Calguns Addict
                  • Oct 2010
                  • 7602

                  Originally posted by AeroEngi
                  Oh don't worry about it man. I really appreciate your help.

                  You might actually be right though. Maybe OAL isn't a major contributing factor to accuracy. The only thing I worry about is if I ever decide to seat my bullets .020" from the lands. If I get a variation of .020" while seating then I could be in trouble because the ogive can potentially be touching the lands at that point.

                  Sent from my DROID RAZR using Tapatalk 2
                  I think that might be the case here. It certainly sounds like it! The word I use is "robust", or a load that doesnt seem to be sensitive to OAL variance. Seem.

                  But for the pressure concern, that's an easy one too. sort your rounds, find some that are .02 long, see if there are any that are .025 long. Shoot them at the range. Look for pressure signs. No pressure signs? Probably OK there too.

                  Comment

                  Working...
                  UA-8071174-1