Unconfigured Ad Widget

Collapse

Outsourced rifle brass processing?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    ar15barrels
    I need a LIFE!!
    • Jan 2006
    • 57202

    Rcbs lube die also decaps.
    Don't size before the dillon trimmer as the dillon trim die needs to be sizing to keep the brass from spinning while trimming.
    I put a neck expander die in station 5 of the size/trim toolhead.
    It knocks off any internal burrs.
    Tumbling after size/trim knocks off any external burrs.
    Randall Rausch

    AR work: www.ar15barrels.com
    Handguns: www.handgunbarrels.com
    Bolt actions: www.700barrels.com
    Foreign Semi Autos: www.akbarrels.com
    Most work done while you wait on a scheduled shop visit.

    Comment

    • #17
      NiteQwill
      Calguns Addict
      • Dec 2007
      • 6368

      Just FYI to those considering:

      Danny at Custom Brass Processing processed 4000 rounds for me in 1 business day.

      If time is worth money, that is probably the best deal ever.

      The fate of the wounded rest in the hands of the ones who apply the first dressing.

      Comment

      • #18
        problemchild
        Banned
        • Oct 2005
        • 6959

        Thats not true at all! I was told by numerous people at Dillon Tech to NOT size with the dillon trim die but to use the carbide die in station1 to size. This is what I do and I can assure you 100% the trim die will not allow the brass to "spin" around willy nilly after sizing on station 1. In fact its still tight as hell in the trim die and with the carbide cutter spinning 30k rpm and touching for only a fraction of a second there is no way it would spin unless NO die was in that station.

        Wow! I mean this will be the newest rumor floating around for the next ten years on all the forums as everyone seems to parrot what they read, not experience. Holy crap!

        And yes the trim die does size the neck too small and it needs to be Lee M die'd back up after. I can process 1600+ brass per hour with my setup. Also sizing on a steel die requires more force and wears the expensive trim die out so why do it?


        Originally posted by ar15barrels
        Rcbs lube die also decaps.
        Don't size before the dillon trimmer as the dillon trim die needs to be sizing to keep the brass from spinning while trimming.
        I put a neck expander die in station 5 of the size/trim toolhead.
        It knocks off any internal burrs.
        Tumbling after size/trim knocks off any external burrs.
        Last edited by problemchild; 10-27-2012, 5:59 PM.

        Comment

        • #19
          Full Clip
          I need a LIFE!!
          • Dec 2006
          • 10266

          Originally posted by NiteQwill
          Danny at Custom Brass Processing processed 4000 rounds for me in 1 business day. If time is worth money, that is probably the best deal ever.
          I just sent off about 1,500 military 30-06 cases to Danny for processing: FL size, decap, swage, trim, tumble. For about $75 including shipping? More than worth it to avoid hours of prep work. He'll get my stash of .223 as well.
          But I do process my own .45acp, .38 Special, .303 Brit, 7.62x54r, 7.62x39 and other brass, so I'm not totally lazy.

          Comment

          Working...
          UA-8071174-1