Unconfigured Ad Widget

Collapse

38 Special Reloading

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Colt562
    Calguns Addict
    • Jun 2012
    • 5271

    38 Special Reloading

    Well looks like im going to be reloading 38 special because I just bought a Lee Classic Loader for it. I wanted to try it out, its for a revolver so I dont plan on shooting more than 50 rounds per range trip. I also bought it for my bug out bag just in case. You never know.

    Well I think I overpaid but oh well. Actually I think it was actually someone on here named Paul. Paid 31 bucks for it.

    Anyway,

    Have some questions, whats your favorite recipe? Lead or Copper bullets? I want to use it for more home defense over target.


    Also anyone willing to sell just 100 pieces of brass?
    Originally posted by bruceflinch
    Tis Better, to be Overworked & Underpaid,
    Than Oversexed & Underlaid...
  • #2
    bballwizard05
    Veteran Member
    • Sep 2009
    • 3323

    Hey alot of conventional wisdom says to use a relatively soft lead bullet #8 or #9. Most of my target ammo I keep the velocity around 800 give or take a little. I did load some FMJ to just under 1000.

    I use bullseye powder, it burns fast so the recipe's use less (therefore I get more rounds out of a keg of powder).

    I've loaded quite a bit of 158g lead round nose at 3.1 grains of bullseye. Fun target load with not too much pop so everyone enjoys shooting it.

    This is out of a 4" S&W

    Comment

    • #3
      rromeo
      Calguns Addict
      • Sep 2009
      • 6981

      I have roughly the same advice as Bballwizard, except that I load 3.2 grs of Bullseye, because that's what my Lee powder measure dispenses with the discs I have.
      I shoot a 3" 65, and 4" 10 and 66.
      Never initiate force against another. That should be the underlying principle of your life. But should someone do violence to you, retaliate without hesitation, without reservation, without quarter, until you are sure that he will never wish to harm - or never be capable of harming - you or yours again.

      - from THE SECOND BOOK OF KYFHO
      (Revised Eastern Sect Edition)

      Comment

      • #4
        Colt562
        Calguns Addict
        • Jun 2012
        • 5271

        The gun is a smith and Wesson model 67-1 with 4" barrel
        Originally posted by bruceflinch
        Tis Better, to be Overworked & Underpaid,
        Than Oversexed & Underlaid...

        Comment

        • #5
          bballwizard05
          Veteran Member
          • Sep 2009
          • 3323

          Unless your shooting a stubby,I wouldn't take barrel length into account really.

          Comment

          • #6
            MIAMIbaseballer
            Senior Member
            • Apr 2012
            • 785

            I haven't reloaded 38, but I've done a lot of research on reloading before I started and I distinctly remember that W231 (which I use for 9) was a very popular powder for 38.....
            It's ok to be jealous. We understand your animosity. We live the life you wish you had. And of over 4000 universities and over 1700 division 1 schools, only one is simply known as "The U"

            Comment

            • #7
              huckberry668
              Senior Member
              • Feb 2007
              • 1502

              148 Star HBWC 2.9 gr HP38/W231 Fed 100 medium roll crimp.

              Zero 125 JHP 5.1 gron P38/W231 over Fed 100 med taper crimp to save brass.

              Both my comp loads.
              GCC
              NRA Certified Pistol Instructor
              Don't count your hits and congratulate yourself, count your misses and know why.

              Comment

              • #8
                Colt562
                Calguns Addict
                • Jun 2012
                • 5271

                Originally posted by MIAMIbaseballer
                I haven't reloaded 38, but I've done a lot of research on reloading before I started and I distinctly remember that W231 (which I use for 9) was a very popular powder for 38.....
                I might have to use that, I was really trying to stay with True Blue but have a small choice of bullets if i use that.
                Originally posted by bruceflinch
                Tis Better, to be Overworked & Underpaid,
                Than Oversexed & Underlaid...

                Comment

                • #9
                  Colt562
                  Calguns Addict
                  • Jun 2012
                  • 5271

                  What type of bullet and weight would you recommend?
                  Originally posted by bruceflinch
                  Tis Better, to be Overworked & Underpaid,
                  Than Oversexed & Underlaid...

                  Comment

                  • #10
                    bballwizard05
                    Veteran Member
                    • Sep 2009
                    • 3323

                    honestly it depends on the application. I have a ton of 125g and 148 grain plinker stuff. I say just find a good deal on some mid weight 125g or 148g lead round nose and load away!

                    Comment

                    • #11
                      JagerDog
                      I need a LIFE!!
                      • May 2011
                      • 15910

                      Bear Creek HBWC

                      3gr Bullseye (or HP38/W231 if you have it).

                      Any SP primer.

                      Just buy a box or 2 of HP's

                      If you really want to load some HP's, get some 125 gr. Hornady XTP's and call it good.
                      Palestine is a fake country

                      No Mas Hamas



                      #Blackolivesmatter

                      Comment

                      • #12
                        Colt562
                        Calguns Addict
                        • Jun 2012
                        • 5271

                        That's what I'll do just find a good deal on se lead bullets and start loading them And if I feel the need for some home defense rounds ill pick up a box of hornady xtp bullets. I also am trying to find a good deal on some brass.
                        Originally posted by bruceflinch
                        Tis Better, to be Overworked & Underpaid,
                        Than Oversexed & Underlaid...

                        Comment

                        • #13
                          bballwizard05
                          Veteran Member
                          • Sep 2009
                          • 3323

                          Just as an aside, there has been written recommendation by Massad Ayoub (FBI ballistics expert) about NOT creating your own HD rounds for a bunch of reasons. There is an article posted in one of my old threads (that I'm too lazy to get right now) stating many reasons not to load your own HD rounds.

                          Comment

                          • #14
                            Colt562
                            Calguns Addict
                            • Jun 2012
                            • 5271

                            That's actually a really good point. Now you got me thinking.
                            Originally posted by bruceflinch
                            Tis Better, to be Overworked & Underpaid,
                            Than Oversexed & Underlaid...

                            Comment

                            • #15
                              bballwizard05
                              Veteran Member
                              • Sep 2009
                              • 3323

                              double post... wtf!

                              Comment

                              Working...
                              UA-8071174-1