Unconfigured Ad Widget

Collapse

Reloading: check. Bullet casting: next.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kylix.rd
    Junior Member
    • Sep 2012
    • 79

    Reloading: check. Bullet casting: next.

    Hello,

    As I mentioned in an introductory post, in the "New to Calguns" forum I got my first handgun (a RIA 1911 45acp) about a month and a half ago and I've been reloading for about 3 weeks (750 rds so far). I've made my own vibratory case tumber and even my own kinetic bullet puller. I think I may need therapy , so I came here for support. Now I've got the bullet casting equipment on the way...Lee Pro 4-20, Lee bullet mold, Lee sizer, extra press... now I'm starting to troll around for lead.

    Since we live in a rather, ahem, interesting state, it seems any mention of lead (or guns and bullets) and folks grab their children and run screaming. I've started calling around to some local tire and auto shops to inquire about the proverbial "bucket of wheel weights". So far I've gotten "it's illegal to sell it" to "we have to recycle with our supplier" to a lecture on the evils of lead and how toxic it is. sigh.

    It is also obvious that many folks that have found a lead supply are highly protective of their "source" in order to keep competition low . However for those flush in lead, a little hint or suggestion would be appreciated. You can even PM me. I'm located in Santa Cruz/Scotts Valley area, but I'm willing to travel to the SF bay area or down to the Monterey/Carmel area.

    Thanks,
    Allen.
  • #2
    zomie
    Member
    • May 2012
    • 487

    You should check in the for sale section. Just do a search there are several that are doing ingot casting for a reasonable price.

    Comment

    • #3
      XDRoX
      Veteran Member
      • Mar 2009
      • 4420

      Yep, check the for sale section or eBay. Flat rate boxes were made for lead
      Also, don't call tire shops, just stop by. Every time I've ever asked at a tire shop for lead, they have always given me some. Even at Sam's Club.

      But since lead wheel weights are now banned you're finding a lot less lead in the buckets they give you.

      Dentists and doctors offices recycle a ton of lead used in x-rays. Next time you're at the dentist ask them if they'll hook you up.
      Chris
      <----Rimfire Addict


      Originally posted by Oceanbob
      Get a DILLON...

      Comment

      • #4
        rsrocket1
        Veteran Member
        • Feb 2010
        • 2774

        Since you live near that big body of water to the west of you, if you are serious about lead, scrounge around for boat keel weights. There are probably dozens of old boats lying around in various states of decay. You might hit the jackpot and be able to scavenge the lead from the keel. But be prepared for a bountiful harvest. Boats often have a couple hundred to a couple thousand pounds of lead in the keel and much of it is dead soft lead (pure).

        You can also check around dive shops or the like for diving weights.

        Yes, the lead is often of unknown composition, but for 45ACP, you don't need ultra hard lead like you do for rifle or super high powered magnum pistols, adding 1-2% tin in the form of solder for every hundred pounds is usually enough to get a good mold fill out and plenty of hardness for the low pressure 45 rounds.

        Check out the castboolits forums for much more information and welcome to a new obsession!

        Comment

        • #5
          Cowboy T
          Calguns Addict
          • Mar 2010
          • 5725

          There are several vendors on the CastBoolits forum that sell lead for reasonable prices. Expect to pay about $1/lb. At that price, yes, the economics make sense for casting your own.
          "San Francisco Liberal With A Gun"
          F***ing with people's heads, one gun show at a time. Hallelujah!
          http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
          http://www.liberalsguncorner.com (podcast)
          http://www.youtube.com/sfliberal (YouTube channel)
          ----------------------------------------------------
          To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.

          Comment

          • #6
            TKM
            Onward through the fog!
            CGN Contributor
            • Jul 2002
            • 10657

            Berm mining can be fun.

            Do you know any shootin' spots?



            Last edited by TKM; 10-07-2012, 10:36 AM.
            It's not PTSD, it's nostalgia.

            Comment

            • #7
              kylix.rd
              Junior Member
              • Sep 2012
              • 79

              Thanks all for the suggestions. I've already been trolling around the CastBoolits forums and there is a wealth of information. I even have a PID controller and thermocouple on the way to "fix" my eBay'd Lee Pro 4-20 . I guess the engineer in me can't help but get involved somehow.

              As for posting here, I'm hoping to get a more "local" perspective on things. Many of us all live in areas that are actively hostile toward the notion of an armed private citizen. The keel weight idea is something to consider. I'd seen others mention that, but those tend to be more pure lead and I wasn't looking to get into alloying just yet. From all I've read, WW lead is closer to ideal for a wider range of uses.

              I was rasied in Missouri, but have been out in Cali for the last 20 years. While not everyone was into guns, gun ownership was seen as part of the culture. My father still lives back in MO (the largest lead producing state, BTW), and I've toyed with the idea of asking him to troll the tire shops back there and flat-rate ship the weights out to me.

              Missouri Bullet Co is selling the lead alloy they use for $2.07/lb, which is better than RotoMetals up in San Leandro. Of course free to a $1/lb is even better.

              Comment

              • #8
                kylix.rd
                Junior Member
                • Sep 2012
                • 79

                I've also considered berm mining. The local gun club has a range, but until I can get invited to join (there's a waiting list right now), I figured it would be "bad form" to approach them since there are many active members who cast as well. They're a little more entitled to that claim.

                I don't know of any "off the books" shootin' spots, but I'm sure there are some since the Santa Cruz mountains are pretty dense... However I'd be a little concerned about huning for one as there are also a lot of "off the books" farms as well.

                One of the guys I work with is a black powder shooter and casts his own ammo, but he needs nearly pure lead for the round balls and slugs. He reloads his cartridge ammo, but buys pre-cast bullets.

                Comment

                • #9
                  bruce381
                  Senior Member
                  • Feb 2009
                  • 2454

                  carigslist works too or old sail boat keels or castboolit for a $1 lb that is very good with NO gas money or time spent smelting thats what i do.

                  Comment

                  • #10
                    CGT80
                    Veteran Member
                    • Jul 2008
                    • 2981

                    I am jealous. I am using a lee 10lb drip o matic. I was eyeballing that lee 20lb pot and a PID controller from a Castboolits member. I did however buy an MP brass 4 cavity 452 270 SAA custom mold. It is a gem. I had cast bullets a few times as a teen and then just got back into it this year, at 31 years old. I wish I had scrounged at all the tire shops for the last 15 years. Hindsight is 20/20. Even at a buck a pound, I can cast 1000 bullets at 270 grains and lube them for $43. Retail is $80-$200 for the same bullet.

                    I wish I could come across something substantial like a boat keel. It would suck to cut one up and then figure out that it had zinc in it though.
                    He who dies with the most tools/toys wins

                    Comment

                    • #11
                      Kappy
                      Calguns Addict
                      • Jul 2007
                      • 5349

                      I wish I could help you. I run low from time to time and have, I'll admit, gone to the extreme of digging in the berm at my range. You get some nasty, stinky lead and a LOT of crap out of it.

                      I was lucky enough the last time I was running low to find a guy at my range who offered me some lead out of the blue. Apparently he casts for a cannon he shoots... and the lead he had wasn't hard enough. It came from the lead jars used for storing cancer drugs. So he just... offloaded fifty+ pounds of this stuff to me. It was AWESOME!

                      You just have to look around for the right deal. Craigslist, ebay, etc. Beyond that, I have no idea what I'm going to do when this lot runs out.
                      Facts are stubborn things; and whatever may be our wishes, our inclinations, or the dictates of our passions, they cannot alter the state of facts and evidence.

                      Comment

                      • #12
                        kylix.rd
                        Junior Member
                        • Sep 2012
                        • 79

                        I found the Lee Pro 4-20 slightly used on eBay. The pictures showed a little surface rust and no lead-residue. Either the user is very good at cleaning out the lead, or it never actually melted any lead. I jumped on it in an instant for $40! Shipping was $11, which made it $51 total. There are some selling their well used ones for >$60.

                        I found a PID controller on newegg.com. Got the thermocouple and the SSR off eBay.

                        Yeah, I also feel that I've kind of missed the boat on the whole wheel weight thing by getting into this hobby late. Boat keels are certainly something to consider, although I've heard that many are still covered in fiberglass and/or paint that has to be ground off. I suppose if you got several hundred or even a thousand pounds, you would invite your bullet casting buddies over, buy a few beers, and have them help. When you're done, give each a decent chunk for their stash.

                        Comment

                        • #13
                          Kappy
                          Calguns Addict
                          • Jul 2007
                          • 5349

                          By the way... good idea on the Lee stuff. It works pretty well... and even if it doesn't, it isn't so expensive that you feel like an idiot. I love my Lee furnace.
                          Facts are stubborn things; and whatever may be our wishes, our inclinations, or the dictates of our passions, they cannot alter the state of facts and evidence.

                          Comment

                          • #14
                            kylix.rd
                            Junior Member
                            • Sep 2012
                            • 79

                            I've also found that you can get replacment parts for all the Lee products... and they're pretty inexpensive too. For the Lee pot, I figure the element and pour spout are the most likely things to fail. Unless the pot rusts away, not much else there to go wrong.

                            Comment

                            • #15
                              Lead Waster
                              I need a LIFE!!
                              • Sep 2010
                              • 16650

                              I'm in the same boat as you. I don't have time/energy to scrounge so I bought some eBay lead and some from Cast Boolits forum. A touch more than $1/lbs do to bidding and shipping, but less work begging. I might ask my own dentist about lead when I do a checkup.

                              Still at $1/lb (or so) it's probably still "worth" it, but I'm going to do it for the fun of it.
                              ==================

                              sigpic


                              Remember to dial 1 before 911.

                              Forget about stopping power. If you can't hit it, you can't stop it.

                              There. Are. Four. Lights!

                              Comment

                              Working...
                              UA-8071174-1