Unconfigured Ad Widget

Collapse

New guy getting into reloading.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • GravityGear
    Junior Member
    • Sep 2012
    • 43

    New guy getting into reloading.

    Hello everyone,

    This is my first post on cgs and I decided to make it here in the reloading forum. I'm looking at getting into reloading to feed my hungry ar and 1911 primarily, but will also be loading 9mm for my ruger p85. I am planning on reloading for every caliber I will ever shoot. I hate being dependent on commercial ammo prices and retail stock. There have been many times I entered a store and they were out of 223/556 plinking rounds and I leave sad and disappointed.

    I am on a budget for my first reloading setup. I have compiled a lot of tools on F&M Reloading. The core of that would be the Lee Classic Turret Press and Lee Dies. I also have some misc. case prep items in there (Lee Zip Trim, Cutter w/ Ball Handle, 223 case length gauge, etc). I shoot about 2 to 3 times a month, but do have that 1 or 2 occasional month where I shoot once a week. I am very mechanically inclined (I'm a mechanic), but can be lazy on occasion. I shoot anywhere from 2-3 hundred rounds of any caliber I bring at a time.

    With that being said, my questions for all of you are:

    1. Is F&M the most inexpensive place to buy Lee?
    2. The Lee Loadmaster is not too much more than a Classic Turret and dies and I don't mind spending on it. Would I see the benefit of the Loadmaster on the amounts and calibers I currently shoot or is that just the lazy part of me coming out?
    3. Are any of you selling a Classic Turret Press?
    4. Case prep (for rifle) scares me. What can I do to keep it simple and speedy?
    5. I live in Northeast Los Angeles, besides The Reloading store at ASR, is there anywhere else I can go to look at and touch this stuff?
    6. What are some common things that new reloaders miss purchasing the first time out?

    Thanks in advance.
  • #2
    Lead Waster
    I need a LIFE!!
    • Sep 2010
    • 16650

    Check this store for Lee prices



    For rifle case prep, look at "Possum Hollow" trimmers and stuff, you can chuck them into a drill press (or a drill that you're holding in a vice) and that speeds it up. If you weren't on a budget then there are some powered case prep devices that are basically spinning brushes, chamfer, deburring tools mounted on it already.

    Classic Turret is a very good choice. If you get tired of it and move to a progressive, you can always sell it back on this forum.

    If you are shooting many calibers, but reasonable amounts of each, the Turret seems like the most economical choice without the monotony of single stage, thought it's always good to have a single stage as well.

    Make sure you have a good scale.

    Make sure you have eye and ear protection, in case a primer detonates for some reason.
    ==================

    sigpic


    Remember to dial 1 before 911.

    Forget about stopping power. If you can't hit it, you can't stop it.

    There. Are. Four. Lights!

    Comment

    • #3
      bruceflinch
      I need a LIFE!!
      • Jan 2006
      • 40179

      You might check out the Marketplace here on CG. Scroll down the Main Page & check out Private Ammo & Reloading Sales. Lots of Bargains there. Good Luck!
      Actually I only started collecting Milsurps 3 years ago. I think I might own about 24...They're cheaper than guns that will most likely never get the opportunity to kill somebody...

      I belong to the group that uses firearms, and knows which bathroom to use.

      Tis better to have Trolled & lost, Than to never have Trolled, at all.

      Secret Club Member?.

      Comment

      • #4
        GravityGear
        Junior Member
        • Sep 2012
        • 43

        Thank you,
        I have a smartreloader digital scale in my basket right now.

        I was looking at FS, but the shipping costs are very high. The highest tier shipping on F&M is $20.

        Comment

        • #5
          Colt562
          Calguns Addict
          • Jun 2012
          • 5271

          Originally posted by GravityGear
          Hello everyone,


          With that being said, my questions for all of you are:

          1. Is F&M the most inexpensive place to buy Lee?
          Look at Grafs.com...5 dollar flat rate shipping, and the cheapest lee stuff I have found.
          2. The Lee Loadmaster is not too much more than a Classic Turret and dies and I don't mind spending on it. Would I see the benefit of the Loadmaster on the amounts and calibers I currently shoot or is that just the lazy part of me coming out?
          I would stick with the lee turret press, although I am looking at getting a Lee Pro 1000 for 223.
          3. Are any of you selling a Classic Turret Press?
          4. Case prep (for rifle) scares me. What can I do to keep it simple and speedy?
          Case prep and speedy are two words never found in the same sentence. I clean with lemishine (look at my threads), deprime/resize, clean again to get lube off, trim, deburr, and chamfer. Takes me a while just to do 100 cases. Again I am using Lee stuff, the lee zip trim, lee chamfer/deburr tool.

          5. I live in Northeast Los Angeles, besides The Reloading store at ASR, is there anywhere else I can go to look at and touch this stuff?
          Not that I know of but google is your friend.
          6. What are some common things that new reloaders miss purchasing the first time out?
          For AR, you will need either small base dies or full length dies. 2 die sets are ok. Lyman Headspace Guage <------a must, look up on youtube what it does, but headspace for rifle cartridges are key.
          Replies are below you questions.
          Originally posted by bruceflinch
          Tis Better, to be Overworked & Underpaid,
          Than Oversexed & Underlaid...

          Comment

          • #6
            GravityGear
            Junior Member
            • Sep 2012
            • 43

            appreciate the responses guys. I was avoiding getting the classic turret press kit due to the beam scale i don't want, but for the price on graf's i may just deal.

            Comment

            • #7
              Mad-B-Man
              Member
              • May 2012
              • 387

              Graf's is even cheaper if you have a dealer account (which you can use an 03 c&r to get). They actually discount reloading stuff (unlike midwayusa and bronwells).
              The lee classic turret is 85 dollars there.

              You pay actual shipping, but if you buy, say, more than 350 dollars worth of equipment (That's how much my setup is going to be), you're still saving, even if it's just slightly. The more you buy, the better the deal, especially if the items you buy are light. Although you have to pay cash to get that pricing, 3%CC fee, which is BS and I think is actually against most CC companies policy.
              For Sale!
              Men's Motorcycle Gear
              Gundam models

              Comment

              Working...
              UA-8071174-1