Unconfigured Ad Widget

Collapse

Boiling Brass

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TheExiled
    Veteran Member
    • Jan 2012
    • 2933

    Boiling Brass

    Hey guys sorry for another 'alternative to tumbling' thread, but I spent my gun related allowance this month on a reloading setup and will have to wait till next month to pick up a tumbler.

    Anyway I have been reading about cleaning brass with tons of different methods, one that stuck was hot/boiling water with soap or vinegar.

    My question is could it hurt to put the brass in a pot on the stove and boil it instead of adding boiling water to a bucket full of brass?

    If this works out, I would also try the oven 200* for an hour drying method, since Im hooked on this already lol.. I spent last night de-priming 500 .223's without even thinking of stopping til the girl pulled the plug haha
    Greater love has no one than this: to lay down one's life for one's friends
  • #2
    Colt562
    Calguns Addict
    • Jun 2012
    • 5271

    When I do my liquid method, I just use warm tap water, vinegar, and detergent, and aggitate it. To dry them, I put them out over night and in the morning I put them in the oven at 200 for 20-30 minutes
    Last edited by Colt562; 08-08-2012, 10:55 AM. Reason: added info
    Originally posted by bruceflinch
    Tis Better, to be Overworked & Underpaid,
    Than Oversexed & Underlaid...

    Comment

    • #3
      blockfort
      Senior Member
      • Oct 2011
      • 1183

      I think heat accelerates the chemical reactions of lemon juice and vinegar, but i can't be sure about that.

      i clean in hot tap water, soap, lemon juice, vinegar, but I tried CLR last night and liked the results.

      I dry mine in the oven at 250 for half an hour.

      Comment

      • #4
        JNunez23
        Veteran Member
        • Jan 2012
        • 2755

        I tried this yesterday, worked okay but I would not make this a routine.

        I used: 1 qt. water, 1 cup vinegar, 1 tablespoon of salt and another of dish soap.

        Cleaned the tarnished brass, but it made them look dull with a pink hue.
        sigpic"Be more concerned with your character than your reputation, because your character is what you really are, while your reputation is merely what others think you are."
        John Wooden

        Need a holster?, please email us at StrappedKydex@gmail.com for any holsters, mag carriers, and more. Custom jobs welcomed!

        Comment

        • #5
          Colt562
          Calguns Addict
          • Jun 2012
          • 5271

          What color was the dish soap? I believe you are only supposed to use deteregent. I used tide and it worked perfectly for me. Looked like it was tumbled.
          Originally posted by bruceflinch
          Tis Better, to be Overworked & Underpaid,
          Than Oversexed & Underlaid...

          Comment

          • #6
            blockfort
            Senior Member
            • Oct 2011
            • 1183

            I used hand dish soap, i think it's different than the machine type.

            Comment

            • #7
              TheExiled
              Veteran Member
              • Jan 2012
              • 2933

              So, scratch the boiling, just add DETERGENT, vinegar and warm water. Then drain, do I rinse it again before drying?
              Greater love has no one than this: to lay down one's life for one's friends

              Comment

              • #8
                blockfort
                Senior Member
                • Oct 2011
                • 1183

                for sure rinse off anything you cleaned it with.

                Comment

                • #9
                  Colt562
                  Calguns Addict
                  • Jun 2012
                  • 5271

                  Yeah rinse it again before trying to dry it off
                  Originally posted by bruceflinch
                  Tis Better, to be Overworked & Underpaid,
                  Than Oversexed & Underlaid...

                  Comment

                  • #10
                    chknlyps2
                    Senior Member
                    • Apr 2011
                    • 2191

                    I picked up a stainless steel kitchen strainer at a discount store, it just fits in the bottom of a 5 gallon bucket, I can leave the detergent mix in the bucket with a lid so the bugs stay out, dunk the brass while in the strainer and let it sit and agitate it once in a while. When I pull out the strainer I can rinse the brass in it also and then let it sit in the sun to dry, the strainer lets air get all around and it dries pretty fast. I tumble for a short time after and my brass looks better than it ever has.

                    I tried hot water the first time and cold from then on and could tell no difference. Now I wash 5 to 10 batches before changing the detergent mix.
                    Wanted: Spent Berdan primed Yugo 7.62x39 & 7.5x55 GP11 Swiss brass

                    Comment

                    • #11
                      TheExiled
                      Veteran Member
                      • Jan 2012
                      • 2933

                      Thanks guys, I put hot water off the stove into a bucket with the brass, some vinegar salt and detergent, soaked for 30, rinsed, baked and loaded my first 50 starting at 23.5grs and working up in .5's
                      Greater love has no one than this: to lay down one's life for one's friends

                      Comment

                      • #12
                        Quinc
                        Veteran Member
                        • Jan 2010
                        • 3011

                        Shop Amazon and contribute to CGF!
                        click this link before going to amazon.com
                        http://www.shop42a.com

                        sigpic
                        www.appleseedinfo.org

                        "Everyone has a plan, till they get punched in the face." -Mike Tyson

                        Comment

                        • #13
                          bohoki
                          I need a LIFE!!
                          • Jan 2006
                          • 20826

                          i would never use anything that would attack the brass

                          Comment

                          • #14
                            M27
                            Senior Member
                            • Apr 2011
                            • 871

                            I guess you could boil it which might help

                            I am personally against drying in the oven since I saw a thread on here where someone annealed all of his brass in the oven

                            to dry my brass when I run through stainless I rinse well with running water then just lay it on a towel roll it around and leave it over night or longer,

                            Don't be in a rush.
                            I will share my opinion and my load data, BUT I am just a guy with too many cigars and too many guns. Whatever I say is probably wrong.

                            Comment

                            • #15
                              Quinc
                              Veteran Member
                              • Jan 2010
                              • 3011

                              Originally posted by M27
                              I guess you could boil it which might help

                              I am personally against drying in the oven since I saw a thread on here where someone annealed all of his brass in the oven

                              to dry my brass when I run through stainless I rinse well with running water then just lay it on a towel roll it around and leave it over night or longer,

                              Don't be in a rush.
                              Takes about 5 minutes to dry in this 100 degree heat we have been having!
                              Shop Amazon and contribute to CGF!
                              click this link before going to amazon.com
                              http://www.shop42a.com

                              sigpic
                              www.appleseedinfo.org

                              "Everyone has a plan, till they get punched in the face." -Mike Tyson

                              Comment

                              Working...
                              UA-8071174-1