Unconfigured Ad Widget

Collapse

.40 Cal reloading

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • BP707
    Junior Member
    • Jan 2011
    • 89

    .40 Cal reloading

    I have been reloading rifle rounds for a few years now but I'm new to reloading pistol rounds. I am getting a very big flash out the front of the gun after every shot Id say it's the size of a soft ball. I am loading once fired brass, Alliant pistol powder, CCI 500 primers, at 6.7 grains. Alliant says 7.2 grains is max. Is this normal for pistol reloads? Should I step it down a half grain and go from there?
  • #2
    Fjold
    I need a LIFE!!
    • Oct 2005
    • 23093

    Originally posted by BP707
    I have been reloading rifle rounds for a few years now but I'm new to reloading pistol rounds. I am getting a very big flash out the front of the gun after every shot Id say it's the size of a soft ball. I am loading once fired brass, Alliant pistol powder, CCI 500 primers, at 6.7 grains. Alliant says 7.2 grains is max. Is this normal for pistol reloads? Should I step it down a half grain and go from there?
    Are you loading a slow powder with a light bullet?

    You need a lot more information for anyone to help you. What weight bullet are you loading? Which powder? Are you shooting indoors?

    I reload 40, 45, 44 mag and none of them shoot a softball sized ball of fire.
    Frank

    One rifle, one planet, Holland's 375




    Life Member NRA, CRPA and SAF

    Comment

    • #3
      BP707
      Junior Member
      • Jan 2011
      • 89

      I am loading a 180Gr bullet with Alliant pistol powder and I was shooting indoors.

      Comment

      • #4
        deac777
        Member
        • Mar 2011
        • 366

        Alliant Power Pistol powder is notorious for producing a bright flash.

        Comment

        • #5
          MisterPo
          Junior Member
          • May 2010
          • 34

          Alliant Power Pistol is known for having a very large muzzle flash. 6.7 grs is below the max load so you're safe there.

          If the muzzle flash bothers you, you can try another powder like Accurate No 5 or 7.

          Comment

          • #6
            Bunsen
            Member
            • Feb 2012
            • 187

            I would switch up the powder. I use Bullseye. I know it is dirty but you can find it everywhere!
            "Freedom is the sure possession of those alone who have the courage to defend it."
            - Pericles

            Comment

            • #7
              mjmagee67
              Veteran Member
              • Jun 2011
              • 2771

              My goto powder for 40S&W and 9mm is Power Pistol. My 40S&W load is either 6.0Gr for a lighter load or 6.6Gr for a heavier load using 180gr bullets. COL is 1.130. 6.7Gr is right in there and will give you a snappy feel an right around 1000FPS.
              If you want change you have to put in your 2 cents, you can't just sit on the sidelines and whine.

              Comment

              • #8
                thomashoward
                In Memoriam
                • Jan 2009
                • 1991

                in .40 I use AA5, 800X or Blue dot. I don't worry about the flash
                Smile , wait for flash
                Last edited by thomashoward; 07-07-2012, 8:03 PM.
                http://i1150.photobucket.com/albums/...0fa5fefab1.jpghttp://i1150.photobucket.com/albums/...Untitled-2.jpghttp://i1150.photobucket.com/albums/...tar76148_1.jpg
                "Everyone has two lives,the second one starts when you realize you only have one "

                Comment

                • #9
                  SublimeJJ99
                  Member
                  • Feb 2012
                  • 308

                  I reload .40 S&W and I've been using W231 powder with Winchester primers and a 140 gr. Lead cast bullet at 6.0 gr. It works great for me. I would recommend using a different powder if you're concerned with muzzle flash.

                  Sent from my SPH-D700 using Tapatalk 2

                  Comment

                  • #10
                    mjmagee67
                    Veteran Member
                    • Jun 2011
                    • 2771

                    Its funny people ooh and aah about the flash with Power Pistol, I've shot at dusk and didn't notice it, maybe I was too busy staring at the front sight! Someday I'm going to shoot it at night.
                    If you want change you have to put in your 2 cents, you can't just sit on the sidelines and whine.

                    Comment

                    • #11
                      Bill Steele
                      Calguns Addict
                      • Sep 2010
                      • 5028

                      Originally posted by BP707
                      I have been reloading rifle rounds for a few years now but I'm new to reloading pistol rounds. I am getting a very big flash out the front of the gun after every shot Id say it's the size of a soft ball. I am loading once fired brass, Alliant pistol powder, CCI 500 primers, at 6.7 grains. Alliant says 7.2 grains is max. Is this normal for pistol reloads? Should I step it down a half grain and go from there?
                      Power Pistol does generally have more flash than most others.

                      My favorite powder for 180gr jacketed in 40 S&W is Hodgdon Longshot. Low flash, great velocity.

                      Have fun, good luck.
                      When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."

                      Comment

                      • #12
                        One78Shovel
                        Veteran Member
                        • Jan 2011
                        • 2962

                        Universal Clays works for me in .40. Low smoke/flash and reasonable recoil.

                        -178S

                        Comment

                        • #13
                          BP707
                          Junior Member
                          • Jan 2011
                          • 89

                          Thanks for all the info. I was just checking because using factory loads I have never seen as big of a muzzle flash before.

                          Comment

                          • #14
                            CGT80
                            Veteran Member
                            • Jul 2008
                            • 2981

                            Try shooting a 1917 or 1919 browning with a short barrel and 8mm Romanian ammo, or a 460 smith revolver and a 240 grain 45 cal bullet at 1932 fps. I let a guy at the outdoor range try the 460 this weekend. I could see a 18-24" fireball at the end of the barrel in bright afternoon sun.

                            Slower powders are said to continue to burn outside of a shorter barrel. The 8mm ammo and a short barrel put on a great show and a lot of noise. 30-06 ammo and a longer barrel are not as impressive in the 1919. My 460 load is 45 grains of win 296. That is a ton of powder to try and burn before it gets all the way out of the gun.

                            Like others said, some powders produce less muzzle flash.

                            I use win 231 for my small pistol rounds, and for light 44 mag or 45 lc loads. I have used it in 40 s&w and 9mm in the dark with only a flashlight to see by. The muzzle flash wasn't bad at all. I was concentrated on running the competition and didn't notice it for the most part. 231 is one of my favorite powders and is the same as HP-38.
                            He who dies with the most tools/toys wins

                            Comment

                            • #15
                              Kappy
                              Calguns Addict
                              • Jul 2007
                              • 5349

                              Heh... I love the flash. Try a Mosin Carbine.

                              I wouldn't worry about the flash unless you don't like flash. It all comes down to whether the recoil is displeasing. If the recoil is fine, it's hitting the target, and fulling cycling the action, I'd say you have a winner.
                              Facts are stubborn things; and whatever may be our wishes, our inclinations, or the dictates of our passions, they cannot alter the state of facts and evidence.

                              Comment

                              Working...
                              UA-8071174-1